1. 서론
The GODOX V1 Pro V1Pro-F is a high-performance camera flash speedlite designed for professional photographers and enthusiasts using Fujifilm cameras. This upgraded version supports Fujifilm's TTL (Through-The-Lens) automatic flash function, offering powerful performance and versatile lighting capabilities for various photographic applications. This manual provides essential information for the safe and effective use of your GODOX V1 Pro V1Pro-F.
2. 패키지 내용
포장을 개봉하신 후, 모든 구성품이 있는지, 그리고 양호한 상태인지 확인해 주십시오.
- GODOX V1 Pro V1Pro-F Flash Unit
- 충전식 리튬 배터리
- 배터리 충전기
- USB-C 케이블
- 미니 스탠드
- 보호 케이스
- 사용 설명서(본 문서)
- Detachable Fill Light Component SU-1 (if included in kit)
Note: The "Godox V1PRO-F kits" mentioned in the product details typically include these items. Specific contents may vary slightly.
3. 설정
3.1 배터리 설치 및 충전
Before first use, fully charge the lithium battery. Insert the battery into the flash unit according to the polarity indicators.
그림 3.1: The GODOX V1 Pro V1Pro-F flash unit connected to a Type-C charging cable and also showing the VC26 charger option for the battery. This illustrates the modern charging convenience of the device.
- 배터리를 충전기에 연결합니다.
- 충전기를 전원에 연결합니다.
- 충전 표시등은 충전 상태를 보여줍니다. 완전히 충전하는 데는 일반적으로 약 3.5시간이 걸립니다.
- Alternatively, the flash unit supports Type-C charging directly.
3.2 카메라에 플래시 장착하기
- 카메라의 전원이 꺼져 있는지 확인하세요.
- Slide the flash hot shoe into your camera's hot shoe mount.
- Tighten the locking knob on the flash unit to secure it firmly to the camera.
- 카메라 전원을 켠 다음 플래시 전원을 켜세요.
4. 사용 설명서
4.1 전원 켜기/끄기
Press and hold the power button for approximately 2 seconds to turn the flash unit on or off.
4.2 Mode Switching (TTL / Manual)
The GODOX V1 Pro V1Pro-F allows for quick switching between TTL (Through-The-Lens) automatic flash mode and Manual flash mode.
그림 4.1: The control panel of the GODOX V1 Pro V1Pro-F, highlighting the dedicated TTL and M buttons for quick mode switching. This feature enables photographers to adapt rapidly to different shooting conditions.
- 를 누르세요 티틀/엠 button to toggle between TTL and Manual modes.
- In TTL mode, the flash output is automatically adjusted by the camera.
- In Manual mode, you can manually set the flash power output using the control dial.
4.3 Flash Head Adjustment (Swivel and Tilt)
The round flash head offers extensive flexibility for direct and bounce flash techniques.
그림 4.2: The GODOX V1 Pro V1Pro-F flash head demonstrating its horizontal swivel from 0° to 330° and vertical tilt from -7° to 120°. This range of motion allows for versatile light positioning and bounce flash applications.
- 수평 회전: The flash head can swivel from 0° to 330°.
- 수직 기울기: The flash head can tilt from -7° to 120°.
- Adjust the head to direct light as needed for bounce flash off ceilings or walls, or for direct illumination.
4.4 모델링 조명
The integrated LED modeling light assists in pre-visualizing the lighting effect before taking a shot.
그림 4.3: A photographer utilizing the GODOX V1 Pro V1Pro-F's adjustable LED modeling light to refine their lighting setup. The modeling light helps in achieving precise illumination and improving shooting efficiency.
- The modeling light has 10 adjustable levels.
- Refer to the flash unit's display and controls to adjust the intensity of the modeling light.
4.5 Continuous Flash Capability
The V1 Pro supports up to 100 full-power continuous flashes, ideal for capturing fast-moving subjects.
그림 4.4: A photographer capturing a moment with the GODOX V1 Pro V1Pro-F, illustrating its capability for continuous shots at full power. This feature is beneficial for dynamic photography where multiple rapid flashes are required.
- This feature is automatically engaged when shooting in continuous mode on your camera, provided the flash is set to a compatible mode (e.g., Manual with sufficient power).
- The flash unit is designed with thermal protection to manage heat during rapid firing.
4.6 Wireless Functionality and Strobe Mode
The V1 Pro features a 2.4G radio system for wireless control and supports high-frequency strobe mode.
- 무선 제어: The flash can act as a master or slave unit, controlling or being controlled by other GODOX 2.4G wireless system devices within a 100-meter range. Refer to the dedicated wireless flash section in the full manual for detailed setup.
- 스트로브 모드: This mode allows the flash to fire multiple times during a single exposure (up to 199Hz) for creative motion blur effects. Adjust frequency and number of flashes via the flash unit's menu.
4.7 Detachable Fill Light Component SU-1
The GODOX V1 Pro introduces the detachable SU-1 fill light component, allowing for versatile lighting setups.
그림 4.5: The GODOX V1 Pro V1Pro-F flash unit alongside its innovative detachable SU-1 fill light component. This design allows the V1 Pro to function as both a bounce flash and a dedicated fill light, offering flexibility and a lighter solution when needed.
- The SU-1 can be attached to the flash unit to provide additional fill light.
- It can also be used separately for more flexible lighting arrangements.
- Consult the SU-1 specific instructions for attachment and operation details.
5. 유지관리
- 플래시 장치를 건조하게 유지하십시오. 비나 습기에 노출시키지 마십시오.
- 플래시 헤드와 본체는 부드럽고 마른 천으로 닦으세요. 용제나 강한 화학 약품은 사용하지 마세요.
- Store the unit in a cool, dry place when not in use. Remove the battery if storing for extended periods.
- 강한 충격을 주거나 기기를 떨어뜨리지 마십시오.
- 플래시 장치를 직접 분해하거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 플래시가 터지지 않습니다. |
|
|
| Flash output is inconsistent or incorrect. |
|
|
| 과열 경고. |
|
|
| 무선 트리거가 작동하지 않습니다. |
|
|
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | GODOX V1 PRO-F |
| 호환 가능한 마운팅 | 후지필름 |
| 플래시 유형 | 외장형 슈 마운트 플래시 |
| 전력 출력 | 76Ws (Maximum) |
| 배터리 | 7.2V / 2980mAh 리튬 배터리 |
| 풀 파워 플래시 | 약. 500 |
| 재활용 시간 | 약 1.5초 |
| 연속 플래시 | Up to 100 full-power flashes |
| 플래시 동기화 속도 | 1/200s (Standard, HSS supported) |
| 무선 시스템 | 2.4G 무선 시스템 |
| 무선 범위 | 최대 100미터 |
| Strobe Mode Frequency | 최대 199Hz |
| Flash Head Swivel | 0°~330° (수평) |
| Flash Head Tilt | -7° ~ 120° (수직) |
| 모델링 라이트 | LED, 10-level adjustable |
| 제품 치수 | 9 x 3.7 x 7 인치 |
| 품목 무게 | 10.4 온스 |
8. 보증 및 지원
8.1 보증 정보
GODOX products typically come with a limited manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official GODOX website for detailed warranty terms and conditions specific to your region and product model. Keep your purchase receipt as proof of purchase for warranty claims.
8.2 고객 지원
For technical assistance, troubleshooting not covered in this manual, or service inquiries, please contact GODOX customer support:
- Web대지: 공식 GODOX를 방문하세요 web사이트 (www.godox.com) for FAQs, software updates, and contact information.
- 이메일/전화: Refer to the contact section on the GODOX website for regional email addresses and phone numbers.
When contacting support, please have your product model (V1 PRO-F) and serial number ready.
