1. 서론
This manual provides essential information for the safe and efficient operation of your Generac 12,500 Starting Watt Tri-Fuel Portable Generator, Model GP9500E TF. Please read all instructions carefully before operating the generator.
Image 1: The Generac GP9500E TF Portable Generator providing power during an outage.
2. 설정
2.1 포장 풀기 및 조립
Your generator comes with several components that require assembly before first use. Ensure all parts are present and undamaged.
- 엔진 오일
- 레귤레이터가 포함된 LP 호스
- 배터리 (전기 시동용)
- 핸들 및 휠 키트
- 사용 설명서
Image 2: Included components in the Generac GP9500E TF package.
Wheel and Handle Installation: Attach the wheels and handles to the generator frame using the provided hardware. This enhances portability.
엔진 오일 추가하기: Locate the oil fill cap/dipstick. Add the provided engine oil to the crankcase. Do not overfill. Refer to the oil capacity in the specifications section.
배터리 연결: Connect the battery terminals, ensuring correct polarity (red to positive, black to negative). The battery powers the electric start feature.
2.2 발전기에 연료 공급
The Generac GP9500E TF is a tri-fuel generator, capable of running on gasoline, liquid propane (LP), or natural gas.
- 가솔린: Fill the 7.5-gallon fuel tank with fresh, unleaded gasoline. Do not use E85 or other ethanol blends exceeding 10%.
- 액화 프로판(LP): Connect the provided LP hose and regulator to a standard LP tank and the generator's LP inlet.
- 천연가스: Connect the generator to a natural gas supply line using appropriate fittings and hoses (not included). Consult a qualified professional for natural gas connections.
WARNING: Always operate the generator in a well-ventilated outdoor area, far from windows, doors, and vents, to prevent carbon monoxide poisoning.
Image 3: Tri-Fuel capabilities and estimated runtimes.
For a visual guide on initial setup, including adding oil and connecting the battery, please watch the following video:
Video 1: Demonstrates the initial setup, including adding oil, connecting the battery, and starting the Generac GP8000E generator.
3. 사용 설명서
3.1 제어판 이상view
Familiarize yourself with the generator's control panel before operation.
Image 4: Control Panel of the Generac GP9500E TF.
3.2 발전기 시작
- 발전기는 평평한 지면에 설치하고 통풍이 잘 되는 실외에 두십시오.
- 오일 및 연료 레벨을 확인하십시오.
- Select the desired fuel type (Gasoline, LP, or Natural Gas) using the fuel selector dial.
- Turn the engine switch to the 'START' position for electric start. If manual start is required, pull the recoil starter handle firmly.
- Once the engine starts, release the switch (for electric start) or the recoil handle.
- 발전기를 몇 분간 가동하여 예열한 후 부하를 연결하십시오.
Watch this video for a demonstration of starting the generator:
Video 2: Demonstrates the starting procedure and features of a Generac portable generator.
3.3 기기 연결
Connect your appliances to the appropriate outlets on the control panel. The generator features multiple outlets:
- 20A, 120V 5-20R GFCI outlets
- 30A, 120/240V L14-30R outlet
- 40A, 120/240V 14-50R outlet
총 와트를 보장tag연결된 기기의 총 소비 전력이 발전기의 작동 전력을 초과하지 않습니다.tage (9500 Watts on Gas). Overloading the generator can cause circuit breakers to trip.
4. 안전 정보
4.1 Carbon Monoxide Safety
Your Generac GP9500E TF is equipped with COsense® 기술, which automatically shuts down the generator if hazardous levels of carbon monoxide are detected. This feature provides powerful protection against carbon monoxide poisoning.
NEVER operate the generator indoors, in a garage, or in any enclosed space. Carbon monoxide is an odorless, colorless, and deadly gas.
Image 5: Key features of the Generac GP9500E TF, including COsense® Technology.
4.2 일반 안전 예방 조치
- 어린이와 애완동물을 발전기 가까이에 두지 마십시오.
- 젖은 상태에서는 발전기를 작동하지 마십시오.
- 발전기의 적절한 접지를 확인하십시오.
- Never refuel a hot or running engine.
- Store fuel in approved containers in a well-ventilated area away from ignition sources.
5. 유지관리
5.1 정기 유지 보수
Regular maintenance is crucial for the longevity and performance of your generator. Refer to the maintenance schedule in the full owner's manual for detailed intervals.
- 오일 레벨 확인: Before each use, check the engine oil level and add if necessary.
- 오일 교환: Change the engine oil after the first 20 hours of operation, then every 100 hours or annually.
- 에어 필터 청소/교체: 에어필터를 정기적으로 점검하고 청소하십시오. 오염이 심하거나 손상된 경우 교체하십시오.
- 점화 플러그: 점화 플러그는 매년 점검하고 청소하십시오. 마모된 경우 교체하십시오.
- 연료 시스템: Drain the fuel system if storing the generator for an extended period (over 30 days) or use a fuel stabilizer.
The generator features a low oil shutdown feature to protect the engine from damage when oil levels are insufficient.
6. 문제 해결
6.1 일반적인 문제
- 엔진이 시동되지 않습니다:
- Check fuel level and type.
- 엔진 오일 수준이 적절한지 확인하세요.
- Verify the engine switch is in the 'START' position.
- 점화 플러그에 오염이나 손상이 있는지 확인하세요.
- 전원 출력 없음:
- Check if any circuit breakers have tripped on the control panel. Reset if necessary.
- 모든 연결이 안전한지 확인하세요.
- Confirm the generator is running at the correct RPM.
- 엔진이 예기치 않게 꺼짐:
- Low oil level (check and refill).
- Overload (reduce connected appliances).
- COsense® activation (move generator to a more open, well-ventilated area).
7. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 제네락 |
| 모델명 | GP9500E TF |
| 모델 번호 | 8061 |
| 시작 와트tage | 12,500 와트 |
| 러닝 와트tage (가스) | 9,500 와트 |
| 연료 유형 | Gasoline, Liquid Propane, Natural Gas |
| 엔진 유형 | 4 스트로크 |
| 탱크 용량 | 7.5갤런 |
| Runtime (Gas, 50% load) | 최대 10.5시간 |
| 점화 시스템 | 전기 시동 |
| 특별 기능 | CO Sense, Electric Start, Low Oil Shutdown, Portable, Tri-Fuel |
| 제품 크기(L x W x H) | 27.2인치 x 26.94인치 x 27인치 |
| 품목 무게 | 227 파운드 |
Image 6: Generac GP9500E TF dimensions and weight.
Image 7: Guide to estimating power needs for various devices.
8. 보증 및 지원
8.1 보증 정보
Your Generac GP9500E TF Portable Generator comes with a 3년 한정 보증. Please refer to the full owner's manual for complete warranty terms and conditions.
8.2 고객 지원
For technical assistance, parts, or service, please contact Generac customer support. Refer to the contact information provided in your owner's manual or visit the official Generac web대지.
