소개
Thank you for choosing the VEVOR Rattan Shoe Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new shoe cabinet. Please read all instructions carefully before assembly and use, and retain this manual for future reference.
안전 경고
- 중량 용량: The top surface has a maximum weight capacity of 27.2 kg (60 lbs). Each flip-open drawer has a maximum weight capacity of 9.1 kg (20 lbs). Do not exceed these limits to prevent damage or injury.
- 넘어짐 방지 장치: It is crucial to install the included anti-tipping device correctly. This device prevents the cabinet from falling over, especially important in households with children or pets. Failure to install it properly can result in serious injury.
- 집회: Ensure all components are securely fastened according to the assembly instructions. Do not use power tools for tightening screws unless explicitly stated, as over-tightening can strip threads or damage parts.
- 놓기: 캐비닛을 평평하고 안정적인 표면에 놓으세요. 재질의 변질을 방지하기 위해 습도가 높거나 직사광선이 드는 곳은 피하세요.
설정 및 조립
The VEVOR Rattan Shoe Cabinet is designed for easy assembly with detailed graphic instructions provided in the packaging. Please follow these instructions step-by-step.
주요 조립 단계:
- 포장 풀고 확인하기: Carefully unpack all components and compare them against the parts list in your assembly guide to ensure all pieces are present and undamaged.
- 프레임 조립: Begin by assembling the main frame of the cabinet, ensuring all connections are firm but not overly tightened until the entire structure is stable.
- 서랍 설치: Attach the flip-open drawer mechanisms and the sliding top drawer according to the diagrams. Ensure smooth operation before proceeding.
- 다리 부착: Securely fasten the metal support legs to the base of the cabinet.
- 넘어짐 방지 장치 설치: This is a critical safety step. Attach the anti-tipping device to the back of the cabinet and secure it to a wall stud using appropriate hardware. Refer to the specific instructions for the anti-tipping device for proper installation.
Image: Illustration of the anti-tipping device installation, showing how to secure the cabinet to a wall for stability and safety.
Image: Detailed product dimensions, including overall height, width, depth, and individual drawer measurements, useful for planning placement and assembly.
작업
The VEVOR Rattan Shoe Cabinet is designed for efficient and discreet shoe storage, featuring flip-open drawers and a top sliding drawer.
Using the Flip-Open Drawers:
- Gently pull the handle on the front of each rattan panel to open the drawer. The drawer will tilt forward, revealing the shoe compartments.
- Place shoes into the designated slots. The innovative design allows for various shoe types, including sports shoes, flats, high heels, and ankle boots.
- To close, push the drawer back into the cabinet until it is flush with the cabinet front.
Adjustable and Removable Panels:
Each flip-open drawer contains internal panels that can be adjusted or removed to accommodate different shoe sizes and styles. This feature maximizes storage flexibility.
- To adjust a panel, gently lift it from its current position and reinsert it into a different slot.
- To remove a panel, lift it completely out of the drawer. This creates a larger single compartment for taller items or multiple smaller shoes.
Top Sliding Drawer:
The cabinet features a small sliding drawer at the top, ideal for storing miscellaneous items such as keys, wallets, sunglasses, or small accessories, keeping your entryway tidy.
Additional Bottom Storage:
The space beneath the lowest flip-open drawer and above the metal support legs can be utilized for additional storage of items that do not fit inside the drawers or for quick access.
Image: The shoe cabinet with its two main flip-open drawers open, showcasing how shoes are stored neatly inside.
Image: A close-up illustrating the functionality of the flip-open drawers, the small top sliding drawer for miscellaneous items, and the additional storage space at the bottom.
Image: Visual representation of how the internal panels can be adjusted or removed to fit different shoe types and sizes, enhancing storage versatility.
유지
Proper care and maintenance will ensure the longevity and appearance of your VEVOR Rattan Shoe Cabinet.
- 청소: 부드러운 d로 표면을 닦으십시오.amp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish or rattan material. For the rattan, a soft brush can be used to remove dust from crevices.
- 유출: Immediately wipe up any spills to prevent staining or water damage, especially on the rattan and wood surfaces.
- 가루 살포: 먼지가 쌓이는 것을 방지하려면 건조하고 부드러운 천으로 캐비닛을 정기적으로 닦으세요.
- 점검: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary, but do not over-tighten.
- 환경: Keep the cabinet away from direct heat sources, prolonged direct sunlight, and excessive moisture to prevent warping, fading, or damage to the rattan.
문제 해결
If you encounter any issues with your VEVOR Rattan Shoe Cabinet, refer to the following common solutions:
- 서랍이 부드럽게 닫히지 않음:
a. Check for any obstructions inside the drawer or along the runners.
b. Ensure all assembly screws for the drawer mechanism are properly tightened.
c. Verify that the cabinet is placed on a level surface. Uneven surfaces can cause misalignment. - 내각이 불안정하게 느껴진다:
a. Confirm that the anti-tipping device is securely installed to a wall stud.
b. Check all assembly screws throughout the cabinet frame and legs for tightness.
c. Ensure the cabinet is on a flat, stable floor. Use furniture levelers if your floor is uneven. - Rattan appears damaged or loose:
a. Rattan is a natural material; minor variations are normal. If significant damage occurs, contact customer support. - 조립 과정에서 부품이 누락되었습니다.
a. Double-check all packaging materials. If parts are genuinely missing, contact VEVOR customer support with your product model and purchase information.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 베보르 |
| 모델 번호 | HZS006 |
| 색상 | 검은색 |
| 제품 크기(L x W x H) | 64.69 x 26.29 x 102.79cm(25.47 x 10.35 x 40.47인치) |
| 품목 무게 | 20kg(44파운드) |
| 최대 하중 용량 | 27.2kg(60파운드) |
| 서랍 하중 용량(각각) | 9.1kg(20파운드) |
| 재료 | Wood, Rattan, Metal |
| 스타일 | 2-tier flip-open drawers with 1 sliding top drawer |
| 장착 유형 | 바닥 장착(전복 방지 벽 부착 장치 포함) |
Image: A visual summary of the product's key specifications, including model number, weight, and detailed dimensions for various parts of the cabinet.
보증 정보
VEVOR products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official VEVOR web사이트. 보증 청구를 위해 구매 증빙 자료를 보관해 주세요.
고객 지원
If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact VEVOR customer support. Have your product model number (HZS006) and purchase details ready when contacting support for faster service.
일반적으로 VEVOR 공식 웹사이트에서 연락처 정보를 찾을 수 있습니다. website or on the packaging materials included with your product.
