BSEED 120V-1 Pack

BSEED 1800W Single Outlet Surge Protector User Manual

Model: 120V-1 Pack

1. 서론

Thank you for choosing the BSEED 1800W Single Outlet Surge Protector. This device is designed to safeguard your valuable home appliances from electrical disturbances such as high/low voltage, power surges, spikes, and power failures. Its intelligent design includes a delay function to protect sensitive equipment during power restoration. Please read this manual carefully before use to ensure proper operation and longevity of your surge protector and connected appliances.

2. 안전 정보

  • 실내에서만 사용 가능: This surge protector is designed for indoor use in dry locations. Do not expose to moisture or wet conditions.
  • 전기 등급 : Do not exceed the electrical rating of 120V, 15A, 1800W. Overloading the device can cause damage or fire.
  • 접지: Ensure the wall outlet is properly grounded. The surge protector requires a grounded outlet for effective protection.
  • 통풍: Do not block the ventilation openings of the surge protector.
  • 어린이와 애완동물: 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
  • 손상: Do not use if the surge protector or its cord appears damaged.
  • 분해 : 장치를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.

3. 제품 특징

The BSEED Surge Protector offers robust protection and user-friendly features:

  • 종합 보호: Guards against high/low voltage, power failure, spikes, instantaneous surges, voltage fluctuations, and load dumping.
  • 자동 차단: 볼륨이 일정하지 않으면 자동으로 전원이 차단됩니다.tage is outside safe limits.
  • 3분 지연 기능: Prevents damage to appliances from rapid power cycling by delaying power restoration after an outage 또는 voltag전자 이벤트.
  • 표시등: Clear LED indicators for High/Low Protect, 5 Min Delay, and Normal/OK status.
  • 내구성 있는 구조: Made from high-quality, fire-resistant ABS material (UL94-V-1.0 grade).
  • 컴팩트한 디자인: Single outlet design that is space-saving and does not obstruct adjacent outlets.
  • 폭넓은 호환성: Suitable for refrigerators, computers, TVs, microwave ovens, water dispensers, ice makers, dishwashers, and other home appliances.
Diagram showing the light indications on the BSEED Surge Protector: High/Low Protect (red), 5 Min Delay (yellow), and Normal/OK (green). An ON button is also visible, along with the single AC outlet.

그림 3.1: 위에view of the surge protector's indicator lights and single AC outlet.

Image showing the compact dimensions of the BSEED Surge Protector, measuring 4.27 inches in height and 2.12 inches in width.

그림 3.2: Compact design and dimensions of the surge protector.

4. 설정

The BSEED Surge Protector features a simple plug-and-play design for easy installation.

  1. 풀다: 서지 보호기를 포장에서 조심스럽게 꺼내세요.
  2. 검사: 기기에 눈에 띄는 손상이 있는지 확인하십시오. 손상된 경우 사용하지 마십시오.
  3. 플러그인: Insert the surge protector directly into a standard 120V AC wall outlet. Ensure it is firmly seated.
  4. 기기 연결: Plug your appliance (e.g., refrigerator, TV, PC) into the single AC outlet on the front of the surge protector.

The device will automatically begin its protection sequence. Refer to the Operating Instructions section for details on indicator lights.

Image illustrating the compact design of the BSEED Surge Protector plugged into a wall outlet, next to another appliance plug, demonstrating that it does not obstruct other sockets. Below, a cluttered power strip with tangled wires is shown with a red X, contrasting with the neat setup of the surge protector.

그림 4.1: The compact design allows for use without obstructing adjacent outlets.

5. 사용 설명서

The surge protector uses three indicator lights to communicate its status:

  • High/Low Protect (Red Light): This light illuminates when the voltage is outside the safe operating range (either too high or too low). When this light is on, power to the connected appliance is cut off to prevent damage.
  • 5 Min Delay (Yellow Light): This light indicates that the device is in its 3-minute delay period. This delay occurs after power is restored following an outage 또는 voltage event, allowing the electrical system to stabilize before reconnecting power to the appliance.
  • Normal/OK (Green Light): This light indicates that the voltage is within the safe operating range and power is being supplied to the connected appliance.

Power Restoration Sequence:

  1. Upon initial plug-in or after a power outage, the device will enter a 3-minute delay period (Yellow Light on).
  2. During this delay, the surge protector monitors the voltage.
  3. 일단 권tage stabilizes and the 3-minute delay concludes, the Yellow Light will turn off, and the Green Light will illuminate, supplying power to your appliance.

Manual Override (ON Button):

The ON button allows you to skip the 3-minute delay if you are present and confirm the voltage has returned to normal. Pressing the ON button during the delay period will immediately restore power to the appliance, provided the voltage는 안정적이다.

Detailed diagram of the BSEED Surge Protector showing the Normal/OK, 5 Min Delay, and High/Low Protect indicator lights, the ON button, and the 1 AC Outlet. Accompanying icons represent Over Voltag전자 보호, Voltage Protection, and Delay/Set the Protection Range.

그림 5.1: 상세한 view of indicator lights and functions.

6. 유지관리

The BSEED Surge Protector requires minimal maintenance.

  • 청소: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive chemicals.
  • 점검: Periodically inspect the device for any signs of wear or damage, especially after electrical storms or power fluctuations.
  • 저장: 기기를 보관할 때는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.

7. 문제 해결

서지 보호기에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

문제가능한 원인해결책
Appliance not receiving power, Red Light (High/Low Protect) is on.입력 볼륨tage가 너무 높거나 너무 낮습니다.The surge protector is functioning as designed. Wait for the voltage to return to normal. If the issue persists, consult an electrician.
Appliance not receiving power, Yellow Light (5 Min Delay) is on.Device is in its power-on delay sequence.Wait for the 3-minute delay to complete. The Green Light will illuminate when power is restored. You can press the ON button to manually override the delay if the voltage는 안정적이다.
No lights are on, appliance not receiving power.No power from the wall outlet or device malfunction.Check the wall outlet with another device. Ensure the surge protector is firmly plugged in. If no power, check your home's circuit breaker. If the problem persists, the unit may be faulty.
Green Light (Normal/OK) is on, but appliance is not working.Appliance issue, not surge protector.Check the appliance's power cord and its own power switch. Test the appliance by plugging it directly into a working wall outlet.

8. 사양

특징사양
모델120V-1 Pack
입력 Voltage120V 교류
최대 전류15A
최대 전력1800와트
총 전원 콘센트1
지연 시간3 minutes (approx. 180 seconds)
재료ABS (UL94-V-1.0 flame retardant grade)
품목 무게4.9 온스
패키지 크기4.61 x 3.35 x 2.44 인치
특징Surge Protection, High/Low Voltage 보호
권장 사용실내

9. 보증 및 지원

BSEED is committed to providing high-quality products and customer satisfaction.

  • 보증: This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact customer service for specific warranty terms and duration.
  • 고객 지원: If you have any questions, requests, or doubts regarding your BSEED Surge Protector, our customer service team is available to assist you 24 hours a day.

연락처 정보:

Please refer to the contact details provided on your product packaging or the official BSEED web최신 지원 정보는 사이트에서 확인하세요.

관련 문서 - 120V-1 Pack

사전view BSEED V723-WIFI 스마트 서지 & 볼륨tag전자 수호자 | 투야 WiFi 제어
BSEED V723-WIFI를 만나보세요. 스마트 WiFi 서지 및 볼륨 조절기입니다.tagTuya 앱을 통한 원격 제어 및 조정 가능한 보호 설정(과부하 차단)을 제공하는 e 보호 장치tage, 언더볼륨tag과부하 방지 기능 및 타이머 기능이 포함되어 있습니다. 자세한 사양 및 FCC 규정 준수 정보가 제공됩니다.
사전view BSEED Smart Plug EA9 User Guide - Setup, Functions, and Safety
This user guide provides comprehensive instructions for the BSEED Smart Plug EA9. Learn how to set up the device using the Smart Life app, connect to Wi-Fi, and utilize functions such as remote control, scheduling, voice commands with Amazon Alexa and Google Assistant, and power monitoring. Includes detailed safety information and WEEE disposal guidelines.
사전view WiFi 터치 스위치 설치 및 사용 설명서
안전 지침, 배선도, 앱 연결 단계를 포함한 WiFi 터치 스위치 설치 및 사용에 대한 포괄적인 가이드입니다.
사전view BHT-7000 스마트 노브형 온도 조절기 사용 설명서 및 설치 가이드
BHT-7000 스마트 노브 온도 조절기에 대한 종합 가이드로, 기술 사양, 설치, 작동, Zigbee 연결 및 온수, 전기 난방, 가스 보일러 시스템의 문제 해결 방법을 다룹니다.
사전view Smart Plug EA8 User Guide: Setup, Features, and Safety Information
Comprehensive user guide for the Smart Plug EA8. Learn how to set up, connect to WiFi, use app features like timing and voice control, and understand safety guidelines for this smart home device.
사전view BSEED Bathroom Fan with Bluetooth Speaker, 3CCT & Night Light - Instruction Manual
This instruction manual guides users through the installation, operation, and troubleshooting of the BSEED Bathroom Fan, featuring a Bluetooth speaker, 3CCT adjustable lighting, and a night light. Enhance your bathroom with efficient ventilation and integrated smart features.