1. 안전 정보
Please read this manual carefully before operating the iScooter IK3 Electric Scooter. Failure to follow instructions may result in injury or damage to the product.
- Always wear a helmet and protective gear (knee pads, elbow pads) when riding.
- Ensure all screws and fasteners are tightened before each ride.
- 젖은 노면, 고르지 않은 노면 또는 적절한 조명 없이 야간에 주행하지 마십시오.
- Supervise children during operation. Recommended age range: 6-12 years.
- 최대 중량: 154파운드
- 고속 주행 중 급정거나 급회전을 피하십시오.
- 스쿠터를 개조하지 마십시오.
2. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- iScooter IK3 Electric Scooter (1)
- 충전기 (1)
- Foot Support (1)
- 사용 설명서 (1)
- Assembly Tools (Allen wrenches)
Figure 2.1: The iScooter IK3 Electric Scooter and included accessories.
3. 설치 및 조립
3.1 언박싱 및 초기 설정
The iScooter IK3 comes mostly pre-assembled. Follow these steps to prepare it for use:
- 스쿠터와 모든 구성품을 포장에서 조심스럽게 꺼내세요.
- Cut any zip ties securing the handlebar to the main frame.
- Locate the folding mechanism lever near the base of the handlebar stem. Push down on this lever to unfold the main frame until it locks into place.
- Extend the kickstand to support the scooter.
Video 3.1: This video demonstrates the unboxing and initial assembly steps for the iScooter IK3 electric scooter, including unfolding the frame and preparing for handlebar attachment.
3.2 핸들바 설치
Attach the handlebar to the stem using the provided tools:
- Align the handlebar with the top of the stem, ensuring the cables are not pinched.
- Insert the provided screws into the designated holes on the handlebar clamp.
- Use the appropriate Allen wrench to securely tighten the screws. Do not overtighten.
3.3 핸들바 높이 조정
The handlebar height can be adjusted to suit the rider's comfort:
- Locate the quick-release lever on the handlebar stem. Open the lever to loosen the stem.
- Press the small button on the side of the stem and slide the handlebar up or down to one of the three adjustable height settings.
- Once the desired height is selected, ensure the button snaps into one of the adjustment holes.
- Close the quick-release lever firmly to secure the handlebar in place.
Figure 3.1: Children riding the iScooter IK3, highlighting its suitability for ages 6-12 and adjustable features.
3.4 접기 및 펼치기
스쿠터를 보관 또는 운반하기 위해 접는 방법:
- Ensure the kickstand is retracted.
- Locate the folding mechanism lever at the base of the handlebar stem. Push down on the lever.
- Gently fold the handlebar stem downwards until it clicks into place, securing it to the rear fender.
To unfold, reverse the steps: push down the lever, raise the handlebar stem until it locks, and then extend the kickstand.
4. 사용 설명서
4.1 전원 켜기/끄기
To power on the scooter, press and hold the power button on the LED display for approximately 3 seconds until the display illuminates. To power off, press and hold the power button again for 3 seconds.
4.2가지 속도 모드
The iScooter IK3 features 3 adjustable speed settings:
- Gear E (Beginner): 최대 3MPH
- Gear N (Normal): 최대 6MPH
- Gear S (Sport): 최대 10MPH
To switch between speed modes, short press the power button while the scooter is on. The LED display will indicate the current speed mode (E, N, or S). The display also shows battery life and current speed.
Figure 4.1: The LED Digital Display provides real-time information on speed, battery level, and speed mode.
4.3 Lights Control
The scooter is equipped with colorful ambient lights for enhanced visibility and fun. To turn the lights on or off, press and hold the light button located near the power button on the handlebar.
Figure 4.2: Colorful ambient lights enhance visibility and add to the riding experience.
4.4 브레이크 시스템
The iScooter IK3 features a dual braking system for reliable stopping power:
- E-Brake: Located on the handlebar, this electronic brake provides responsive stopping.
- Footbrake: A traditional footbrake located on the rear fender allows for additional control and stopping force. Press down on the rear fender with your foot to engage. When the footbrake is applied, the LED lights on the deck turn red as a warning.
Figure 4.3: The e-brake on the handlebar provides quick and easy stopping.
Video 4.1: This short video showcases the iScooter IK3 electric scooter in action, demonstrating its features and smooth operation.
Video 4.2: This video highlights the dual braking system, magnetic charging, and LED display for enhanced safety and user experience.
5. 충전 작업
The iScooter IK3 features an innovative magnetic charging design for easy and secure connection.
- Locate the magnetic charging port on the side of the scooter deck.
- Connect the magnetic charger to the port. The magnetic connection ensures proper alignment.
- Plug the charger into a standard wall outlet. The charging indicator on the charger will show the charging status.
- 배터리를 0%에서 100%까지 완전히 충전하는 데는 일반적으로 약 3시간이 소요됩니다.
- Ensure the scooter is fully charged before its first use for optimal performance.
Figure 5.1: The magnetic charging port offers a quick, easy, and secure connection.
6. 유지관리
정기적인 유지관리는 스쿠터의 수명과 안전한 작동을 보장합니다.
- 청소: 광고로 스쿠터를 닦으세요amp 옷감. 가혹한 화학 물질이나 과도한 물을 사용하지 마십시오.
- 타이어: The IK3 uses solid rubber wheels, eliminating the need for inflation. Regularly inspect for wear and tear.
- 브레이크: Periodically check the functionality of both the e-brake and footbrake. Ensure they respond effectively.
- 패스너: Regularly check all screws and bolts to ensure they are tight. Tighten as necessary.
- 저장: 스쿠터는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
7. 문제 해결
일반적인 문제와 해결 방법은 아래 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스쿠터 전원이 켜지지 않습니다 | 배터리 부족; 전원 버튼을 제대로 누르지 않았습니다 | Charge the battery; Press and hold the power button for 3 seconds |
| 조명이 작동하지 않습니다 | Lights turned off; Loose connection | Press and hold the light button; Check for visible loose wires |
| Reduced speed/power | Low battery; Incorrect speed mode; Overload | Charge the battery; Switch to a higher speed mode (N or S); Ensure rider weight is within limits |
| 브레이크가 제대로 작동하지 않음 | Brake mechanism issue | Inspect brake components for damage or obstruction. Contact support if issue persists. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 아이스쿠터 |
| 모델명 | 아이케이3 |
| 연령대 (설명) | 6-12 |
| 중량 제한 | 154 파운드 |
| 모터 파워 | 150와트 |
| 속도 설정 | 3 (3/6/10 MPH) |
| 제품 치수 | 32.3인치 길이 x 14.4인치 너비 x 38.8인치 높이 |
| 바퀴 수 | 2 |
| 휠 소재 | 고무 |
| 프레임 소재 | 알류미늄 |
| 브레이크 스타일 | Rear Braking (Dual Braking System: E-brake and Footbrake) |
| 충전 시간 | 3시간 |
| 최대 거리 범위 | 9킬로미터 (약 5.6마일) |
| 특징 | LED-Display | Dual Braking System | Magnetic Charging |
9. 보증 및 지원
iScooter prioritizes quality and technical excellence. We offer a warranty on different parts of the scooter:
- A 360-day or 180-day warranty on different parts (refer to specific warranty card for details).
For fast and professional service, please contact our support team:
- 콜센터: +1 (855) 916-2366
- 라이브 채팅/이메일: support@iscooterglobal.com
Figure 9.1: iScooter Company Logo.
