소개
This manual provides essential information for the setup, operation, and maintenance of your Arducam USB 3.0 Camera Module B0497C. This high-speed 4K camera features an 8.3MP IMX678 sensor, designed for superior low-light performance and wide-angle capture on Windows and Linux systems.
Image: Arducam 8.3MP IMX678 Low Light USB 3.0 Camera Module B0497C highlighting its 4K resolution, USB 3.0 connectivity, 90fps@720p high speed, and 100°(D) wide-angle lens.
상자 안에 무엇이 들어있나요?
상자를 풀 때 모든 구성품이 들어 있는지 확인하세요.
- 1 x IMX678 USB3.0 Camera Module with Back Cover and Tripod Adapter
- 1m USB A-Type-C 케이블 1개
Image: Contents of the Arducam USB 3.0 Camera Module package, showing the camera module and the USB Type-C cable.
설치 지침
- USB 케이블 연결: Insert the USB Type-C end of the provided 1m cable into the camera module's Type-C port.
- 컴퓨터에 연결: Plug the USB-A end of the cable into an available USB 3.0 port on your Windows or Linux computer. For optimal performance, use a USB 3.0 port.
- 드라이버 설치(플러그 앤 플레이): The camera is designed for plug-and-play operation. No additional drivers are typically required for Windows and Linux operating systems. The system should automatically detect and install the necessary components.
- 장착(선택 사항): The camera module includes a tripod adapter. You can attach it to a standard tripod or mounting bracket for stable positioning.
Image: Detail of the USB Type-C port on the Arducam camera module, indicating USB 3.0 connectivity.
Image: The Arducam camera module attached to a tripod, demonstrating a typical setup configuration. Note: Tripod is not included.
작동 지침
소프트웨어 호환성
The Arducam B0497C is compatible with standard webcam software on both Windows and Linux operating systems. It functions as a UVC (USB Video Class) device.
- 윈도우: Use built-in camera applications, OBS Studio, VLC Media Player, or other third-party software that supports UVC cameras.
- 리눅스: Utilize applications like Cheese, OBS Studio, VLC Media Player, or custom applications that interface with V4L2 (Video for Linux Two) devices.
Image: Visual representation of the camera module's compatibility with Windows and Linux operating systems.
기본 동작
- 소프트웨어 실행: Open your preferred camera application on your computer.
- 카메라를 선택하세요: If you have multiple cameras, select "Arducam USB Camera" or a similar identifier from the device list within your software.
- 설정 조정: Most applications allow you to adjust resolution, frame rate, brightness, contrast, and other image parameters. The camera supports resolutions up to 3840x2160 (4K) and frame rates up to 90fps at 720p.
- 저조도 성능: The IMX678 sensor provides enhanced low-light capabilities. For optimal results in dim environments, ensure your software settings are configured to utilize these features.
Image: A visual comparison demonstrating the superior low-light performance of the Arducam 4K IMX678 camera compared to a standard camera.
이미지: 전amples illustrating the camera's effective performance in low-light conditions, such as indoor and outdoor night scenes.
유지
- 렌즈 청소: Use a soft, lint-free cloth specifically designed for optical lenses to gently wipe the camera lens. Avoid abrasive materials or harsh chemicals.
- Cleaning the Module: For the camera body, use a dry, soft cloth to remove dust. Do not use liquid cleaners directly on the module.
- 저장: When not in use, store the camera module in a clean, dry environment, away from extreme temperatures and direct sunlight.
- 손질: Handle the camera module by its edges to avoid touching the lens or the circuit board components.
문제 해결
- Camera not detected by computer:
- USB 케이블이 카메라와 컴퓨터에 제대로 연결되어 있는지 확인하십시오.
- Try a different USB port on your computer, preferably a USB 3.0 port.
- 가능하다면 다른 USB 케이블로 테스트해보세요.
- 컴퓨터를 다시 시작하세요.
- Check your operating system's device manager (Windows) or
lsusbcommand (Linux) to see if the device is listed.
- Poor image quality or excessive noise:
- Ensure adequate lighting in the environment. While the camera has low-light capabilities, extreme darkness will still affect image quality.
- Adjust camera settings within your software (e.g., exposure, gain, white balance).
- 렌즈에 얼룩이나 먼지가 없는지 확인하십시오.
- Check for available firmware updates from Arducam's official website, as updates can improve image processing.
- Low frame rate:
- Ensure the camera is connected to a USB 3.0 port. USB 2.0 ports will limit bandwidth and frame rate.
- Reduce the resolution or disable certain image enhancements in your software to decrease bandwidth requirements.
- Close other applications that might be consuming significant system resources.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | 비원씨(B0497C) |
| 감지기 | IMX678 CMOS |
| 해결 | 8.3MP(3840x2160) |
| 프레임 속도 | 90fps@720p |
| 렌즈 유형 | M12 Lens, F1.65 Aperture |
| 분야 View (시야) | 100 ° (D) |
| 연결성 | USB 3.0 (카메라에 Type-C 커넥터 탑재) |
| 특별 기능 | Low Light Performance, Onboard ISP (de-Bayer, gamma, BLC, AE, AWB, CCM, RGB2YUV) |
| 운영 체제 | Windows, Linux (Plug and Play) |
| 품목 무게 | 3.53 온스 |
| 패키지 크기 | 1.34 x 1.34 x 1.34 인치 |
보증 및 지원
보증 정보 및 기술 지원에 대해서는 Arducam 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
아르두캄 공식 Web대지: www.arducam.com
