1. 중요한 안전 정보
Read and understand all safety warnings and instructions before operating this powerhead. Failure to follow these instructions may result in serious injury or death.
- 개인 보호 장비: Always wear appropriate personal protective equipment (PPE), including eye protection (safety glasses or goggles), hearing protection, heavy-duty gloves, long pants, and sturdy, non-slip footwear.
- 연료 취급: Handle fuel with extreme care. Gasoline is highly flammable. Mix and store fuel in a well-ventilated area, away from sparks, open flames, or other ignition sources. Do not smoke while handling fuel.
- 운영 환경: Operate the powerhead in a clear area, free from bystanders, children, and pets. Maintain a safe distance from other people and objects. Be aware of your surroundings and potential hazards.
- 사전 작업 확인: Before each use, inspect the powerhead and any attached accessories for loose parts, damage, or wear. Ensure all guards and safety features are in place and functioning correctly.
- 접촉을 피하다: Keep hands, feet, and clothing away from moving parts. Be cautious of flying debris, especially when using cutting attachments.
- 비상 차단: 엔진 정지 스위치의 위치와 작동법을 숙지하십시오.
- 저장: Store the powerhead and fuel in a secure, well-ventilated area, out of reach of children. Allow the engine to cool completely before storing.
WARNING: Always wear protective gear, including eye and ear protection. Avoid contact with skin and eyes. Be cautious of flying debris.
2. 제품 오버view
The PRORUN 25.4cc Gas-Powered Powerhead is a versatile multi-tool power unit designed for various outdoor tasks when paired with compatible attachments (sold separately). Its robust 2-cycle engine provides reliable power for garden edging, lawn care, and other landscaping needs.
주요 특징
- 힘: Commercial-grade 1.0 horsepower from the robust 25.4cc engine.
- 신뢰할 수 있음: Fuel tank capacity of 20.2 oz for extended operation.
- 인간 공학: Features an ergonomic handle, barrier bar, and shoulder harness for comfortable use.
- 진동 방지: Integrated anti-vibration system designed to reduce operator fatigue during prolonged use.
- 기능: Compatible with multiple attachments for diverse landscaping requirements.
구성 요소 다이어그램
3. 조립 설명서
This section details the steps required to assemble your PRORUN Powerhead and prepare it for attachment use.
3.1 Connecting the Shaft Sections
- Align the square drive shaft of the lower section with the receiving end of the powerhead's upper shaft.
- Push the lower shaft firmly into the upper shaft until it clicks into place or is fully seated.
- Tighten the coupling knob or screws securely to ensure a rigid connection.
3.2 액세서리 부착하기
The PRORUN Powerhead is designed to work with various PRORUN attachments (sold separately). Ensure you use only compatible attachments with an 8-pointed spline connection.
- Loosen the coupling knob on the powerhead's shaft.
- Insert the attachment's drive shaft into the powerhead's coupling, ensuring the 8-pointed spline aligns correctly.
- Push the attachment firmly until it is fully seated.
- Tighten the coupling knob securely to prevent the attachment from detaching during operation.
4. 사용 설명서
Proper operation ensures efficiency and safety. Follow these steps for starting and using your powerhead.
4.1 연료 혼합
The PRORUN Powerhead uses a 2-cycle engine and requires a specific gasoline/oil mixture. Refer to your engine manual for the exact ratio (typically 50:1 or 40:1). Use fresh, unleaded gasoline with an octane rating of 89 or higher, mixed with high-quality 2-cycle engine oil.
- 깨끗하고 승인된 연료 용기를 구하십시오.
- 적정량의 2행정 엔진오일을 용기에 부으십시오.
- 명시된 양의 휘발유를 넣으세요.
- 용기를 단단히 닫고 골고루 섞이도록 살살 흔들어 주세요.
- Fill the powerhead's fuel tank, avoiding overfilling.
4.2 엔진 시동
Follow these steps to start the 2-cycle engine:
- Place the powerhead on a flat, stable surface.
- Move the choke lever to the 'FULL CHOKE' position.
- Press the primer bulb 5-10 times until fuel is visible in the return line.
- Set the throttle to the 'START' or 'HALF THROTTLE' position.
- Grip the starter handle firmly and pull the starter rope with a smooth, continuous motion until the engine attempts to start (usually 1-3 pulls).
- Once the engine 'pops' or attempts to start, move the choke lever to the 'HALF CHOKE' position.
- 엔진이 시동될 때까지 스타터 로프를 다시 당깁니다.
- Once the engine is running, move the choke lever to the 'RUN' position and allow the engine to warm up for 30-60 seconds before operating at full throttle.
4.3 첨부 파일 사용
Once the engine is running and warmed up, you can begin using your chosen attachment. Always ensure the attachment is securely fastened before operation.
- 스트링 트리머: Use for cutting grass and light weeds. Maintain a steady pace and avoid hitting hard objects.
- Edger: Ideal for creating clean lines along sidewalks and driveways. Adjust the depth wheel for desired cutting depth.
- 헤지 트리머: For shaping hedges and shrubs. Keep both hands on the handles and maintain balance.
- 장대톱: For trimming high branches. Ensure a stable footing and be aware of falling debris.
5. 유지관리
Regular maintenance is crucial for the longevity and optimal performance of your PRORUN Powerhead.
5.1 에어 필터 청소
A clean air filter ensures proper engine performance and prevents premature wear.
- 공기 필터 덮개를 제거하세요.
- 에어필터를 조심스럽게 제거하세요.
- Clean the filter using warm, soapy water, or compressed air. For heavily soiled filters, replace with a new one.
- Allow the filter to dry completely before reinstallation.
5.2 스파크 플러그 검사
Inspect the spark plug periodically for wear and proper gap.
- 점화 플러그 부트를 제거하십시오.
- 점화 플러그 렌치를 사용하여 점화 플러그를 제거하십시오.
- Check for carbon buildup, electrode wear, or damage. Clean or replace as necessary.
- 점화 플러그 간격이 제조업체 사양에 맞게 설정되어 있는지 확인하세요.
- Reinstall the spark plug and boot.
5.3 Fuel System Care
To prevent fuel system issues, especially during storage:
- Always use fresh fuel mixture. Stale fuel can cause starting problems and engine damage.
- For long-term storage (over 30 days), drain the fuel tank and run the engine until it stops to clear the carburetor of fuel. Alternatively, use a fuel stabilizer.
5.4 일반 청소 및 보관
- Clean the exterior of the powerhead after each use, removing grass, dirt, and debris.
- Inspect all fasteners and tighten any that are loose.
- Store the powerhead in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
6. 문제 해결 가이드
This guide addresses common issues you might encounter with your PRORUN Powerhead.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 엔진이 시동되지 않습니다 | 연료가 없거나 연료 혼합 비율이 잘못되었습니다. 초크가 올바르게 설정되지 않았습니다 점화 플러그가 오염되었거나 손상되었습니다. 에어 필터가 막혔습니다 | Check fuel level and mixture. Refuel if necessary. Ensure choke is in 'FULL CHOKE' for cold start, then 'HALF CHOKE', then 'RUN'. 점화 플러그를 점검하고 청소하거나 교체하십시오. 공기 필터를 청소하거나 교체하세요. |
| 엔진 시동은 걸리지만 꺼집니다. | 초크 설정이 잘못되었습니다 Engine not warmed up 연료 필터가 막혔습니다 공회전 속도가 너무 낮음 | Move choke to 'RUN' position after starting. Allow engine to warm up for 30-60 seconds. Inspect and replace fuel filter if necessary. Adjust idle speed screw (refer to service manual). |
| 작동 중 전원 손실 | 막힌 공기 필터 잘못된 연료 혼합 점화 플러그 문제 과열 | 공기 필터를 청소하거나 교체하세요. 연료와 오일의 비율이 올바른지 확인하십시오. 점화 플러그를 점검하고 청소하거나 교체하십시오. Allow engine to cool. Check for obstructions around cooling fins. |
| 과도한 진동 | 느슨한 부착 손상된 부착물 느슨한 패스너 | Ensure attachment is securely fastened. Inspect attachment for damage; replace if necessary. Check and tighten all visible fasteners. |
7. 기술 사양
Detailed specifications for the PRORUN 25.4cc Powerhead.
| 사양 | 세부 사항 |
|---|---|
| 상표 | 프로런 |
| 모델 번호 | PRORUN 25.4cc Powerhead |
| 전원 | 가스 동력 |
| 엔진 배기량 | 25.4cc |
| 엔진 유형 | 2 사이클 |
| 품목 무게 | 10.6파운드(4.8kg) |
| 제품 치수 | 40.2"L x 12.9"W (approximate, powerhead only) |
| 연료 탱크 용량 | 약 20.2온스 |
| 첨부 파일 호환성 | 8-pointed spline connection (PRORUN attachments recommended) |
| 조립이 필요합니다 | 예 |
8. 보증 및 고객 지원
For warranty information, technical assistance, or to purchase replacement parts, please contact PRORUN customer support. Keep your purchase receipt and product model number handy when contacting support.
- 온라인 지원: Visit the official PRORUN webFAQ 및 지원 리소스를 위한 사이트입니다.
- 연락처 정보: Refer to the contact details provided in your product packaging or on the PRORUN brand store page on Amazon.
