Instruction Manual for BlackZon Smyter MT Turbo 1/12 RTR 4WD Brushless Monster Truck

1. 서론

Welcome to the world of high-performance remote control vehicles with the BlackZon Smyter MT Turbo. This 1/12 scale Ready-to-Run (RTR) 4WD Brushless Monster Truck is engineered for durability, speed, and off-road capability. It features a powerful brushless motor system, robust 4WD shaft drivetrain, and independent double wishbone suspension, making it suitable for various terrains and driving styles.

주요 특징:

• 4WD shaft drive Monster Truck for superior traction.
• 3S-capable Brushless System for enhanced power and speed.
• Adjustable Oil-Filled Coilover Shocks for improved handling over rough terrain.
• 4-Gear Steel Differentials Front & Rear for robust power distribution.
• Metal Driveshafts & Hex Hubs Front & Rear for increased durability.
• Independent double wishbone suspension for stable performance.
• Splashproof Electronics for protection against elements.
• 2.4GHz Radio with 2 in 1 ESC/Receiver for reliable control.
• Li-Po 7.4V 1600mAh Battery w/ T-Plug included.

Figure 1.1: The BlackZon Smyter MT Turbo 1/12 RTR 4WD Brushless Monster Truck, showcasing its robust design and vibrant green and black color scheme.

2. 안전 지침

Operating remote control vehicles requires caution to prevent injury or damage. Please read and adhere to the following safety guidelines:

• 성인 감독: This product is recommended for ages 3 months and up, but adult supervision is highly recommended, especially for younger users, due to the speed and power of the vehicle.
• 운영 환경: Operate the vehicle in open, clear areas away from people, pets, and obstacles. Avoid public roads, crowded areas, and water bodies (unless specifically designed for water use, which this model is not).
• 배터리 안전:
  • Always use the recommended Li-Po battery and charger.
  • Never overcharge or over-discharge Li-Po batteries.
  • 충전 중인 배터리를 방치하지 마십시오.
  • 배터리는 직사광선과 인화성 물질을 피해 서늘하고 건조한 곳에 보관하십시오.
  • If the battery becomes swollen, punctured, or damaged, discontinue use immediately and dispose of it properly.
• 움직이는 부품: Keep fingers, hair, and loose clothing away from rotating wheels and drivetrain components to prevent entanglement or injury.
• 열: The motor and electronic speed controller (ESC) can become hot during operation. Avoid touching them immediately after use.
• 약: Keep batteries and electronic components away from children and pets. Do not ingest any parts or chemicals.
• 유지: 안전하고 최적의 성능을 보장하기 위해 본 설명서에 설명된 대로 정기적인 유지 보수를 수행하십시오.

3. 상자 안에 무엇이 들어있나요?

패키지를 열 때 모든 구성품이 들어 있고 상태가 양호한지 확인하세요.

• BlackZon Smyter MT Turbo 1/12 RTR 4WD Brushless Monster Truck (fully assembled)
• 2.4GHz 무선 송신기
• Li-Po 7.4V 1600mAh Battery with T-Plug
• Battery Charger (specific type not detailed, typically included with RTR kits)
• 사용 설명서(본 문서)

Required to Complete (Not Included):

• 3 x AA Batteries for the transmitter (HPI Recommends #101939 Plazma AA Batteries or equivalent)

4. 구성요소 종료view

Familiarize yourself with the main components of your BlackZon Smyter MT Turbo and its remote control.

4.1. Vehicle Components

그림 4.1: 측면 view of the BlackZon Smyter MT Turbo, highlighting its ground clearance and large tires.

그림 4.2: 상향식 view of the BlackZon Smyter MT Turbo chassis with the body removed, showing the internal electronics, motor, and drivetrain components.

• 브러시리스 모터 : Provides high power and efficiency.
• Electronic Speed Controller (ESC) / Receiver Unit: Controls motor speed and receives signals from the transmitter. This is a 2-in-1 unit.
• 스티어링 서보: 앞바퀴의 방향을 제어합니다.
• 배터리 칸: Located on the chassis, designed to securely hold the Li-Po battery.
• 오일 충전식 쇼크 업소버: Provide damping for suspension, improving stability over bumps.
• Driveshafts & Differentials: Transmit power to all four wheels.
• 타이어: Directional tractor tires for optimal grip on various surfaces.

4.2. Transmitter Components

그림 4.3: 전면 view of the 2.4GHz radio transmitter, showing the steering wheel and trigger.

그림 4.4: 상단 view of the 2.4GHz radio transmitter, showing the various adjustment dials and power switch.

• 스티어링 휠 : Controls the left and right steering of the vehicle.
• 스로틀 트리거: 당기면 전진 가속하고, 밀면 제동/후진합니다.
• 전원 스위치: 송신기를 켜거나 끕니다.
• 스티어링 트림 다이얼: Adjusts the neutral steering position if the vehicle pulls to one side.
• 스로틀 트림 다이얼: 스로틀의 중립 위치를 조정합니다.
• Dual Rate (D/R) Dial: 최대 조향각을 조절합니다.
• 배터리 칸: AA 배터리 3개가 들어갑니다.

5. 초기 설정

Before your first drive, follow these steps to prepare your BlackZon Smyter MT Turbo.

5.1. 차량 배터리 충전

1. Connect the included battery charger to a suitable power outlet.
2. Connect the Li-Po 7.4V 1600mAh battery to the charger. Ensure the T-Plug connection is secure.
3. Observe the charger's indicator lights (refer to charger manual if provided) to confirm charging status.
4. Once charging is complete (indicator light changes or turns off), disconnect the battery from the charger.
5. 중요한: Never leave charging batteries unattended. Do not overcharge.

5.2. 송신기 배터리 설치

1. 송신기 하단에 있는 배터리함을 찾으십시오.
2. 배터리실 커버를 밀어서 엽니다.
3. 배터리 3개를 넣고, 배터리 칸 안쪽에 표시된 대로 극성(+/-)을 올바르게 맞춰 넣으세요.
4. 배터리 덮개를 단단히 닫으세요.

5.3. 차량용 배터리 설치

1. Remove the body clips and carefully lift the truck body off the chassis.
2. 본체에서 배터리함을 찾으십시오.
3. Place the charged Li-Po battery into the compartment.
4. Connect the battery's T-Plug to the corresponding T-Plug connector on the ESC/Receiver unit. Ensure a firm connection.
5. Secure the battery in place using any straps or clips provided.
6. Re-attach the truck body, securing it with the body clips.

5.4. 송신기와 수신기 결합

Your truck and transmitter should be pre-bound from the factory. If they lose connection or you are using a new transmitter/receiver, follow these steps to re-bind:

1. Ensure both the transmitter and vehicle are turned OFF.
2. 송신기를 켭니다.
3. Turn ON the vehicle's power switch (on the ESC/Receiver unit).
4. The LED on the ESC/Receiver unit should indicate a successful connection (e.g., solid green light). If it blinks, refer to the ESC/Receiver manual for specific binding instructions, which usually involves pressing a bind button on the receiver while powering on.
5. Test steering and throttle response to confirm successful binding.

6. 사용 설명서

Once setup is complete, you are ready to operate your BlackZon Smyter MT Turbo.

6.1. 차량 시동

1. 차량을 평평하고 깨끗한 곳에 놓으십시오.
2. 먼저 송신기를 켜세요.
3. Turn ON the vehicle's power switch. The ESC/Receiver LED should illuminate, indicating it's ready.

6.2. 주행 제어

• 앞으로: Pull the throttle trigger towards the grip.
• 브레이크: Push the throttle trigger away from the grip (from neutral position).
• 뒤집다: After braking, push the throttle trigger away from the grip again to engage reverse.
• 조종: Rotate the steering wheel clockwise to turn right, counter-clockwise to turn left.

6.3. Adjusting Trim and Dual Rate

• 스티어링 트림: If the vehicle does not drive straight when the steering wheel is centered, adjust the Steering Trim dial on the transmitter until it tracks straight.
• 스로틀 트림: If the vehicle moves slightly forward or backward when the throttle trigger is at neutral, adjust the Throttle Trim dial until it remains stationary.
• Dual Rate (D/R): This dial controls the maximum steering angle. Turn it down for less sensitive steering (good for high speeds or beginners) and up for more sensitive steering (for tighter turns).

6.4. Ending Operation

1. Turn OFF the vehicle's power switch first.
2. Turn OFF the transmitter.
3. Disconnect the battery from the vehicle and remove it for storage or charging.
4. Allow the motor and ESC to cool down before handling or storing.

7. 유지관리

Regular maintenance will extend the lifespan and performance of your BlackZon Smyter MT Turbo.

• 청소: After each use, especially in dusty or dirty conditions, clean the vehicle. Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and drivetrain. Avoid using water directly on electronics.
• 점검: Regularly inspect for loose screws, damaged parts (e.g., bent suspension arms, cracked chassis, worn tires), and proper functioning of all moving parts.
• 구동계: Check the steel spur gear and differential gears for wear. Ensure metal driveshafts and hex hubs are secure.
• 충격: 오일식 쇼크 업소버의 누출 여부와 작동 상태를 점검하십시오.amp필요에 따라 충격 오일을 다시 채우거나 교체하세요.
• 문장: The vehicle features a complete set of ball bearings. Periodically check them for smooth operation and clean/lubricate if necessary.
• 배터리 보관: Store Li-Po batteries at a "storage charge" level (typically 3.8V per cell) if not used for extended periods.
• 매끄럽게 하기: Apply appropriate RC-specific lubricant to moving metal parts as needed, avoiding electronics.

8. 문제 해결

If you encounter issues with your BlackZon Smyter MT Turbo, refer to the table below for common problems and solutions.

9. 사양

10. 보증 및 지원

For warranty information, technical support, or replacement parts, please contact BlackZon customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided in this manual, most RC products come with a limited warranty covering manufacturing defects. Damage due to misuse, accidents, or unauthorized modifications is typically not covered.

구매를 고려하세요asing extended protection plans if available, such as those offered by retailers, to cover accidental damage or extended periods of use.