NETVIP WiFi 리피터 사용자 설명서

1. 서론

The NETVIP WiFi Repeater is designed to extend the coverage of your existing wireless network, eliminating Wi-Fi dead zones and providing a stable, high-speed internet connection throughout your home or office. This device supports a data transfer rate of up to 300Mbps and offers multiple operating modes, including Repeater Mode and Access Point (AP) Mode, to adapt to various network requirements.

Its compact, wall-plug design and easy WPS setup make it a convenient solution for enhancing your Wi-Fi signal.

2. 패키지 내용

다음 품목이 들어 있는지 패키지를 주의 깊게 확인하세요.

• 1 x NETVIP Wireless Mini Repeater
• 1 x RJ45 이더넷 케이블
• 1 x 사용자 매뉴얼(이 문서)

3. 제품 오버view 및 기능

The NETVIP WiFi Repeater is equipped with features designed for optimal performance and ease of use.

Figure 3.1: NETVIP WiFi Repeater (Front View)

• Boosting WiFi Coverage: Extends existing network signals up to 300Mbps, eliminating dead zones.
• 다양한 작동 모드: Supports Repeater Mode for signal amplification and Access Point (AP) Mode to create a new wireless network from a wired connection.
• 컴팩트한 디자인: Portable, wall-plug design with an integrated Ethernet LAN port for wired connections.
• WPS 설정: One-touch wireless security encryption for quick and easy setup.
• Smart Signal Lights: LED indicators show signal strength, helping to find the best placement for the device.

4. 사양

5. 설정 및 설치

5.1 최적의 위치 선택

For optimal performance, place the repeater in a location where it can receive a strong signal from your existing router and also effectively extend coverage to the desired areas. Use the signal indicator lights on the device to help determine the best spot.

Figure 5.1: Optimal Placement for WiFi Coverage

5.2 전원 켜기

Plug the NETVIP WiFi Repeater directly into a standard electrical wall socket. The power indicator light should illuminate.

5.3 Initial Configuration (WPS Method)

The easiest way to set up your repeater is using the WPS (Wi-Fi Protected Setup) button.

1. Plug the NETVIP Repeater into a power outlet near your existing wireless router.
2. Press the WPS button on your existing wireless router.
3. Within 2 minutes, press the WPS button on the NETVIP WiFi Repeater.
4. Wait for approximately 3 seconds. The repeater's signal indicator lights will change to indicate a successful connection.

Figure 5.2: WPS Setup Process

Once connected, you can unplug the repeater and move it to your desired location within the range of your main router's signal.

5.4 초기 구성 (Web 브라우저 방식)

If your router does not support WPS, or for advanced settings, you can configure the repeater via a web 브라우저.

1. Plug the NETVIP Repeater into a power outlet.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (e.g., "NETVIP_XXXXXX"). No password is required initially.
3. 열기 web browser and enter the default IP address (usually 192.168.10.1 or check the user manual included in the box for the exact IP).
4. Log in using the default username and password (typically "admin" for both).
5. Follow the on-screen wizard to select your operating mode (Repeater or AP) and configure network settings, including selecting your existing Wi-Fi network and entering its password.
6. Save the settings. The repeater will restart, and you can then connect your devices to the extended network.

6. 작동 모드

The NETVIP WiFi Repeater supports two primary operating modes:

6.1 리피터 모드

In Repeater Mode, the device extends the range of your existing wireless network. It receives the Wi-Fi signal from your main router and re-broadcasts it, effectively expanding your network's coverage area.

Figure 6.1: Repeater Mode Operation

6.2 액세스 포인트(AP) 모드

In AP Mode, the device transforms a wired internet connection into a wireless one. You connect the repeater to your router or modem via an Ethernet cable, and it then broadcasts a new Wi-Fi network.

Figure 6.2: Access Point Mode Operation

This mode is useful for adding wireless capability to a wired network or creating a separate Wi-Fi network.

7. 장치 연결

After successful setup, your extended Wi-Fi network will be available. The network name (SSID) will typically be your original network name followed by "_EXT" or similar. Connect your wireless devices (laptops, smartphones, tablets, smart TVs) to this new network using the same password as your main router.

7.1 유선 연결

The repeater also features an Ethernet LAN port. You can connect wired devices such as desktop computers, gaming consoles, or smart TVs to this port for a stable wired connection to your extended network.

Figure 7.1: Wired and Wireless Device Connections

8. 유지관리

To ensure the longevity and optimal performance of your NETVIP WiFi Repeater, consider the following maintenance tips:

• 청소: 부드럽고 마른 천으로 기기를 부드럽게 닦으세요. 액체 세척제나 에어로졸은 사용하지 마세요.
• 통풍: Ensure the device is placed in a well-ventilated area and its vents are not obstructed.
• 펌웨어 업데이트: Periodically check the NETVIP official web최상의 성능과 보안을 보장하기 위해 사용 가능한 펌웨어 업데이트가 있는지 해당 사이트를 확인하십시오.
• 재설정: If the device is unresponsive or you wish to revert to factory settings, use a paperclip to press and hold the 'Reset' button for about 5-10 seconds until the lights flash.

9. 문제 해결

If you encounter issues with your NETVIP WiFi Repeater, refer to the following common problems and solutions:

• No Power/Lights Off:

  Ensure the repeater is securely plugged into a working electrical outlet. Try a different outlet.

• 리피터의 Wi-Fi에 연결할 수 없습니다:

  Make sure the repeater is powered on. If it's a new setup, ensure you're connecting to the default open network. If already configured, verify the Wi-Fi password.
• No Internet Access After Connecting:

  Check if your main router has internet access. Ensure the repeater is within range of your main router and receiving a strong signal (check signal indicator lights). Re-run the setup process if necessary, especially if settings were changed.

• 속도가 느리거나 연결이 불안정한 경우:

  Relocate the repeater closer to your main router to improve signal strength. Ensure there are no major obstructions (thick walls, large metal objects) between the router and repeater. Reduce interference from other electronic devices. Consider updating the repeater's firmware.

• WPS 설정 실패:

  Ensure you press the WPS button on both the router and repeater within the 2-minute window. Some routers require WPS to be enabled in their settings. Try the web browser setup method if WPS continues to fail.
• 로그인 비밀번호를 잊으셨나요? Web 인터페이스:

  Perform a factory reset on the repeater by pressing the 'Reset' button. This will revert the login credentials to default ("admin"/"admin"). Note that this will erase all your configured settings.

10. 보증 및 지원

NETVIP products come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official NETVIP web대지.

For technical support, troubleshooting assistance, or further inquiries, please contact NETVIP customer service through the contact information provided on their official web사이트나 제품 설명서에서 확인하세요.

Web대지: www.netvip.com (전amp링크를 확인해 주세요. 실제 내용을 확인해 주시기 바랍니다. web대지)