LAUNCH X431 PRO Dyno 2025 Bidirectional Scan Tool User Manual

1. 서론

The LAUNCH X431 PRO Dyno 2025 is a state-of-the-art bidirectional scan tool designed for comprehensive vehicle diagnostics. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance and longevity.

Key features include advanced ECU Coding, OE-Level All System Diagnostics, Bi-directional Active Tests, and over 38 special functions. It supports modern automotive protocols like CAN-FD and DoIP, offering extensive vehicle coverage.

Figure 1.1: LAUNCH X431 PRO Dyno 2025 Scan Tool and its components.

2. 상자 안에 무엇이 들어있나요?

패키지를 열 때 모든 구성품이 들어 있고 상태가 양호한지 확인하세요.

• X-431 PRO fifth generation tablet
• DBSCAR VII 진단 커넥터
• Power adapter, 5V / 5A, wire length 1.2m
• Various OBD-II and non-OBD-II adapters (as shown in product images)

Figure 2.1: The LAUNCH X431 PRO Dyno 2025 scan tool and its comprehensive set of adapters and cables.

3. 설정 가이드

3.1 초기 전원 켜기 및 구성

1. 기기 충전: Connect the provided power adapter to the X-431 PRO Dyno tablet and a power outlet. Allow the device to fully charge before first use. The 6300mAh battery provides over 21 hours of continuous use.
2. 전원 켜기: Press and hold the power button until the LAUNCH logo appears on the 8-inch 1280x800 display.
3. 언어 선택: Follow the on-screen prompts to select your preferred language. The device supports 24 languages including English, French, Spanish, German, and more.
4. Wi-Fi 연결: Connect the device to a stable Wi-Fi network. This is crucial for software updates and online features.
5. 소프트웨어 업데이트: Navigate to the "Software Update" section. Perform a one-touch smart update to ensure all diagnostic software and vehicle data are current. Regular updates are provided for 2 years free of charge.

Figure 3.1: The software update interface on the LAUNCH X431 PRO Dyno 2025, showing the progress of an update.

3.2 차량에 연결하기

1. OBD-II 포트를 찾으십시오: 차량의 OBD-II 진단 포트를 찾으십시오. 일반적으로 운전석 쪽 대시보드 아래에 있습니다.
2. Connect DBSCAR VII: Plug the DBSCAR VII diagnostic connector into the vehicle's OBD-II port. Ensure a secure connection.
3. 의사소통 체계를 구축하세요: The DBSCAR VII connects wirelessly via Bluetooth (up to 33ft range) or via Type-C wired connection for stable data transmission. The tablet will automatically detect the VCI.
4. 시동 켜짐: 차량의 점화 장치를 "ON" 위치(엔진 끄기)로 돌립니다.

Figure 3.2: The DBSCAR VII diagnostic connector (VCI) connected to a vehicle's OBD-II port, illustrating wireless communication with the tablet.

4. 사용 설명서

4.1 모든 시스템 진단

The LAUNCH X431 PRO Dyno performs OE-level diagnostics across all accessible vehicle systems (e.g., PCM, ECM, EPS, PDM, BCM, TPMS, SCCM, RADIO, ABS, SRS, etc.).

1. AutoVIN & Scan: From the main menu, select "Intelligent Diagnose" or "Local Diagnose" and then "AutoVIN" (for 2006+ models) to automatically identify the vehicle. Alternatively, manually select vehicle make, model, and year.
2. 건강 보고서: Initiate a "Health Report" scan to quickly identify all system fault codes (DTCs). The scan tool will display a progress bar and list detected issues.
3. DTC 읽기/지우기: View detailed descriptions of Diagnostic Trouble Codes. Use the "Clear Codes" function to erase DTCs after repairs are completed.
4. 라이브 데이터 스트림: Access real-time data parameters from various sensors and modules. Data can be displayed in graphical format for easier analysis.

그림 4.1: 이상view of the all-system diagnostic capabilities, including AutoVIN, Clear Codes, Read Codes, AutoScan, Live Data, and ECU Info.

4.2 Bi-directional Active Tests

This function allows sending commands from the scan tool to vehicle ECUs to test specific components or systems.

1. Access Active Test: From the diagnostic menu, select "Active Test" or "Bi-directional Control."
2. Select Component: Choose the component you wish to test (e.g., radiator fan, fuel pump, windows, lights, etc.).
3. Execute Test: Send commands to activate or deactivate the component and observe its response. This helps in quickly pinpointing faulty parts.

Figure 4.2: Demonstrates the bi-directional control feature, allowing the user to send commands to vehicle components like parking brake, AC clutch, headlamps, ABS pump, and windows/doors.

4.3 ECU 코딩

ECU Coding allows for customization, matching, and recalibration of ECU components.

1. Access ECU Coding: Select "ECU Coding" from the main menu or diagnostic functions.
2. 작업 수행:
   • Setup New ECU Modules: Match, learn, or code new ECU modules after replacement.
   • 개인화: Customize vehicle functions (e.g., auto engine start-stop, flashing headlights on alarm, auto side mirrors folding, change dashboard brightness, fuel consumption display, auto door).
   • Fix Complex Issues: Recode or calibrate ECUs to resolve performance issues.
3. 메모: Available coding operations vary by vehicle make, model, and year.

Figure 4.3: The ECU Coding interface, showing options for personalizing car settings and optimizing driving experience.

4.4 특수 기능(38개 이상)

The device offers over 38 commonly used special functions for various maintenance and reset services.

• 오일 리셋 서비스: Reset engine oil life system.
• EPB 재설정: Electronic Parking Brake reset.
• SAS 교정: 조향각 센서 보정.
• ABS 출혈: Bleed the Anti-lock Braking System.
• 인젝터 코딩: Write adaptive code for injectors.
• TPMS 재설정: Tire Pressure Monitoring System reset.
• BMS 재설정: Battery Management System reset.
• 스로틀 적응: Adapt throttle position.
• 서스펜션 매칭: Adjust suspension parameters.
• And many more, including Gear Learning, Windows Calibration, Sunroof Initialization, AFS Reset, etc.

Figure 4.4: A visual representation of some of the 38+ special functions available, such as Oil Reset, EPB Reset, SAS Calibration, Airbag Reset, BMS Reset, Brake Bleed, TPMS, and Injector Coding.

4.5 추가 기능

• CAN-FD 및 DoIP 지원: Covers modern vehicles using these protocols. A DoIP adapter may be required for some models.
• FCA 자동 인증: Provides secure gateway access for 2018+ FCA vehicles.
• 원격 진단: Allows for remote technical assistance.
• 진단 보고서: 종합적인 진단 보고서를 생성하고 인쇄합니다.
• 온라인 피드백: Direct communication channel for operational and diagnostic tips.

Figure 4.5: Highlights various features including AutoAuth for FCA SGM, V.A.G Guided Function, CAN-FD & DoIP support, Remote Diagnostic, Online Repair Resources, 8-in-1 Live Data Stream, and Diagnostic Report Print & Share.

5. 유지관리

Proper maintenance ensures the longevity and optimal performance of your LAUNCH X431 PRO Dyno.

• 소프트웨어 업데이트: Regularly check for and install software updates to ensure compatibility with new vehicle models and access to the latest features. Updates are free for 2 years.
• 청소: 부드럽고 마른 천으로 태블릿 화면과 본체를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 저장: Store the device in its protective case in a cool, dry place when not in use. Avoid extreme temperatures.
• 배터리 관리 : 배터리 수명을 연장하려면 배터리를 자주 완전히 방전하지 마십시오. 사용하지 않을 때에도 정기적으로 충전하십시오.
• VCI 케어: Keep the DBSCAR VII connector clean and free of debris. Ensure pins are not bent or damaged.

Figure 5.1: The device and its protective case, emphasizing the importance of proper storage and care.

6. 문제 해결

이 섹션에서는 일반적인 문제와 그 해결책을 다룹니다.

For further assistance, utilize the "Online Feedback" or "Remote Diagnosis" features on the device, or contact customer support.

7. 사양

Figure 7.1: Key specifications and worldwide car coverage details for the LAUNCH X431 PRO Dyno 2025.

8. 보증 및 지원

The LAUNCH X431 PRO Dyno comes with a commitment to customer satisfaction and long-term support.

• 무료 소프트웨어 업데이트: Enjoy 2 years of subscription-free software updates.
• 품질 백업: The product includes a 5-year quality backup.
• 평생 기술 지원: Reliable lifetime technical assistance is offered by a team of experts, available 24/7/365.
• 지원팀에 문의: For any issues or inquiries, you can contact customer support at 1-888-756-2936 (Mon-Fri 9:00 AM–6:00 PM EST) or use the "Online Feedback" feature on the device.

그림 8.1: 이상view of the LAUNCH X431 PRO Dyno's main features and support offerings.

9. 공식 제품 영상

Watch these official videos for a visual guide on using your LAUNCH X431 PRO Dyno.