1. 제품 오버view
The Juno FMLSQ Square Indoor Flush Mount is a 15-inch LED ceiling light designed for easy installation in various indoor settings. It features a modern aesthetic and offers versatile lighting options. The fixture includes a black interchangeable trim, allowing users to customize its appearance. A built-in switch enables selection of five color temperatures: 2700K (Soft White), 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight). Additionally, the FMLSQ includes a nightlight solution, providing a low-level light ideal for areas like foyers, hallways, bedrooms, bathrooms, and stairways.
Image: Juno FMLSQ 15-inch square LED flush mount ceiling light highlighting its nightlight feature and interchangeable trim.
2. 안전 정보
Before beginning installation, read and understand all instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage, personal injury, or death. Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- 조명기구를 설치, 수리 또는 청소하기 전에 항상 회로 차단기에서 전원을 차단하십시오.
- Ensure the input power is 120VAC, 60Hz.
- 배선을 변경, 이전 또는 제거하지 마십시오.amp holders, or other electrical components.
- 설치 시에는 안전 안경과 장갑을 착용하세요.
3. 설정 및 설치
This section provides step-by-step instructions for installing your Juno FMLSQ LED Flush Mount Ceiling Light.
3.1 패키지 내용
Verify that all parts are included before beginning installation:
- Juno FMLSQ LED Flush Mount Fixture
- 장착 플레이트
- 나사 2개
- 3 Wirenuts
- Black Interchangeable Trim Ring
3.2 설치 단계
- 설치 준비: Turn off all power at the circuit breaker box. Remove any existing light fixture from the junction box.
- 디퓨저 제거: Rotate all four clips on the fixture to the OPEN position. Carefully separate the diffuser from the housing assembly.
- 색온도(CCT)를 선택하세요: Locate the CCT selection switch on the back of the fixture. Move the switch to select your desired color temperature: 2700K (Warm White), 3000K (Soft White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
- 장착 플레이트 설치: Install the mounting plate and screws provided into the junction box mounting holes. Check the junction box mounting hole dimension to decide which pair of mounting plate slots to use. Install screws into threaded holes in the junction box, rotate the mounting plate to ensure 'A' and 'B' screw holes are parallel with a room wall before tightening screws to secure the mounting plate.
- 배선 연결: Connect the black, white, and copper (ground) wires from the fixture to the corresponding wires in the junction box using the provided wirenuts. Ensure all connections are secure.
- 보안 고정 장치: Align the fixture keyhole slot with the installed screws on the junction box. Push the wires into the junction box, avoiding pinching any wires. Slide the fixture to lock it in place, then secure it by tightening the screws.
- Diffuser를 설치하세요: Install the fixture diffuser and rotate the clips to the CLOSED direction to secure it.
- 복원력 : Turn electricity back on at the circuit breaker.
Image: Underside of the fixture with clips in the open position, ready for diffuser removal.
Image: Close-up of the CCT selection switch on the fixture's housing.
3.3 Optional: Changing Trim Ring
The FMLSQ fixture ships with a matte white trim. A black interchangeable trim is included in the package for aesthetic customization.
- To change the trim, simply remove the white trim from the diffuser by removing it from the top opening side only.
- Install the black trim from the top opening side of the diffuser and ensure it is securely fastened onto the diffuser.
3.4 설치 비디오
Video: Detailed installation guide for the Juno Flush Mount Ceiling Light. This video demonstrates the steps for mounting the fixture, connecting wires, and securing the diffuser.
4. 사용 설명서
Learn how to use the various lighting features of your Juno FMLSQ fixture.
4.1 색온도 선택
The fixture allows you to select from five different color temperatures to suit your preference or room ambiance. This selection is made using a switch on the back of the fixture during installation (refer to Section 3.2, Step 3). The available options are:
- 2700K: 소프트 화이트
- 3000K: 따뜻한 흰색
- 3500K: 뉴트럴 화이트
- 4000K: 쿨화이트
- 5000K: 일광
Image: A visual representation of the different color temperatures (2700K to 5000K) provided by the light fixture in a room.
4.2 디밍 기능
The Juno FMLSQ is dimmable, offering flicker-free dimming from 100% down to 10%. This allows you to adjust the light output to create the desired ambiance. Ensure you use a compatible dimmer switch (sold separately) for optimal performance.
Image: A visual representation of the dimming capabilities of the light fixture, from full brightness to 10% output.
4.3 야간 조명 모드
The fixture includes a nightlight mode, providing a soft, ambient glow. To activate the nightlight mode:
- Turn the light switch ON.
- Turn the light switch OFF.
- Within 1 second, turn the light switch ON again. The nightlight mode will activate.
Repeat this sequence to return to normal lighting mode.
Image: Illustration of the wall switch sequence to activate and deactivate the nightlight mode.
4.4 Features Video
비디오: 끝view of the Juno Flush Mount's key features, including color temperature selection, dimming, and nightlight functionality.
5. 유지관리
Regular maintenance ensures optimal performance and longevity of your LED flush mount light.
- 청소: Ensure power is OFF at the circuit breaker before cleaning. Wipe the fixture with a soft, damp 천을 사용하십시오. 연마성 세척제나 용제를 사용하지 마십시오. 마감재나 전기 부품이 손상될 수 있습니다.
- 점검: 정기적으로 조명기구를 점검하여 손상이나 연결 불량이 있는지 확인하십시오. 문제가 발견되면 즉시 전원을 차단하고 자격을 갖춘 전기 기술자에게 문의하십시오.
- LED : 일체형 LED 광원은 장기간 사용을 위해 설계되었으며 교체가 필요하지 않습니다.
6. 문제 해결
If you experience issues with your Juno FMLSQ light, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않음 | No power to the fixture; Loose wiring connection; Faulty switch. | Check circuit breaker and wall switch. Verify all wire connections are secure. Test the switch for functionality. |
| 잘못된 색온도 | CCT 스위치가 잘못 설정되었습니다. | Turn off power at the breaker. Remove the diffuser and adjust the CCT switch to the desired setting. Reinstall diffuser and restore power. |
| 조명이 부적절하게 깜빡이거나 어두워집니다. | 호환되지 않는 조광 스위치; 배선이 헐거워짐. | Ensure a compatible LED dimmer switch is used. Check wiring connections for tightness. |
| Nightlight mode not activating | 스위치 순서가 잘못되었습니다. | Follow the ON-OFF-ON sequence within 1 second precisely. |
7. 사양
Detailed technical specifications for the Juno FMLSQ 15-Inch Square LED Flush Mount Ceiling Light.
| 특징 | 세부 사항 |
|---|---|
| 상표 | 주노 |
| 모델 번호 | FMLSQ 15IN SWW5 90CRI WBT NL M4 |
| 치수 | 15인치 길이 x 15인치 너비 x 3.3인치 높이 |
| 광원 유형 | 주도의 |
| 왓tage | 26 와트 |
| 명도 | 2600루멘 |
| 색온도 | 색온도 조절 가능 (2700K, 3000K, 3500K, 4000K, 5000K) |
| 밝기 조절 가능 | Yes (100% down to 10%) |
| 재료 | 아크릴 |
| 설치 유형 | 플러시 마운트 |
| 권tage | 120 볼트 |
| 실내/실외 사용 | 실내 |
| Ratings/Listings | CSA certified, suitable for damp location, Title 24 Part 7 |
| 품목 무게 | 4 파운드 |
Image: Dimensional drawing of the Juno FMLSQ fixture, indicating its 15-inch length and width, and 3.3-inch height.
8. 보증
The Juno FMLSQ 15-Inch Square LED Flush Mount Ceiling Light is covered by a 5-year limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer support.
9. 지원
For further assistance, technical support, or warranty claims, please contact Juno customer service. Refer to the contact information provided on the product packaging or the official Juno web대지.
