1. 서론
The JBL COL600 is a 24-inch (600 mm) slim column loudspeaker designed for professional audio applications. It features wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt for optimized sound projection. Its compact and elegant design integrates seamlessly into various architectural settings, making it suitable for conference rooms, lecture halls, retail spaces, and other environments requiring high-performance audio with a discreet aesthetic.
This manual provides essential information for the safe and effective installation, operation, and maintenance of your JBL COL600 speaker.
2. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- JBL COL600 Slim Column Speaker (1 pc)
- 로우프로file Swivel (Pan) / Tilt Wall Bracket
- L-Brackets (2 pcs)
3. 설정 및 설치
The JBL COL600 offers versatile mounting options to suit various installation requirements. Always ensure the mounting surface can safely support the weight of the speaker and its brackets.
3.1 장착 옵션
Two types of brackets are included for installation:
- L-브라켓: These can be installed on either the top and bottom panels for horizontal pan aiming, or on the left and right side panels for vertical mounting. Both configurations allow for close-to-the-wall installation.
- 로우프로file Swivel (Pan) / Tilt Wall Bracket: This bracket provides additional flexibility, allowing for up to 10° of down-tilt adjustment in addition to the speaker's built-in 10° down-tilt.
그림 1: 측면 view of the JBL COL600 speaker showing an L-bracket installed for wall mounting.
그림 2: 측면 view of the JBL COL600 speaker with the low-profile swivel/tilt wall bracket, allowing for adjustable aiming.
3.2 배선 연결
The COL600 speaker supports both distributed speaker lines and direct 8-ohm operation:
- 70V or 100V Distributed Systems: Utilize the built-in 20-watt multi-tap transformer for connection to 70V or 100V constant voltage audio systems. Ensure the correct tap setting is selected based on your system's requirements.
- 8-ohm Direct Operation: For direct connection to a low-impedance amplifier, switch the speaker to its 8-ohm setting. This mode supports a power handling of 80W continuous (320W peak, 2 hours).
Always ensure power is off before making any connections to prevent damage to the speaker or amp리퍼.
4. 사용 설명서
Once properly installed and connected, the JBL COL600 speaker is ready for operation.
4.1 전원 켜기
오디오 소스와 amplifier are connected and powered on according to their respective manuals. The COL600 speaker itself is a passive device and does not require separate power. It draws power from the connected amp리퍼.
4.2 오디오 재생
Begin playing audio through your connected source. Adjust the volume levels on your amplifier to achieve the desired sound output. The COL600 delivers a frequency range of 70 Hz to 20 kHz, providing clear sound for both music and speech applications.
그림 3: 전면 view of the JBL COL600 speaker, ready for audio playback.
5. 유지관리
The JBL COL600 is designed for durability and features an IP54 rating, offering protection against dust and water ingress. Regular maintenance will help ensure its longevity and optimal performance.
- 청소: Use a soft, dry cloth to wipe the exterior of the speaker. For stubborn dirt, a slightly damp 천을 사용할 수 있지만 과도한 습기는 피하십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
- 환경 보호: The drivers are water-treated, and the grille has a water-backing. A cover is included to protect the input terminals. While rated IP54, avoid direct exposure to heavy rain or prolonged submersion.
- 연결 확인: 케이블 연결부가 안전하게 고정되어 있고 부식이나 손상이 없는지 정기적으로 점검하십시오.
6. 문제 해결
If you encounter issues with your JBL COL600 speaker, refer to the following common troubleshooting steps:
- 소리 없음:
- 확인해주세요 amplifier의 전원이 켜져 있고 올바르게 작동하고 있습니다.
- 음원 소스와 오디오 기기 사이의 모든 오디오 케이블 연결 상태를 확인하십시오. amplifier, and speaker. Ensure they are securely plugged in.
- Confirm the correct input is selected on your amp리퍼.
- If using 70V/100V, ensure the correct tap setting is selected on the speaker and the amplifier output matches. If using 8-ohm, ensure the speaker is set to 8-ohm and the amplifier는 호환됩니다.
- 가능하다면 다른 오디오 소스나 케이블을 사용하여 테스트해 보세요.
- 왜곡된 소리:
- 볼륨 레벨을 줄이세요 amplifier and audio source. Overdriving the speaker can cause distortion.
- 케이블 손상 여부 또는 연결 불량 여부를 확인하십시오.
- Ensure the speaker's impedance setting (70V/100V tap or 8-ohm) matches the amplifier의 출력.
- 간헐적인 소리:
- Inspect all connections for looseness or intermittent contact.
- Check for any physical damage to the speaker cable.
If the issue persists after performing these steps, contact JBL Professional customer support for further assistance.
7. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | JBL-COL600-BK |
| 스피커 유형 | 슬림 컬럼 스피커 |
| 장착 유형 | 벽걸이형 |
| 재료 | 플라스틱 |
| 제품 크기(D x W x H) | 3.7" x 4" x 23.5"(93mm x 102mm x 597mm) |
| 품목 무게 | 10파운드(4.5kg) |
| 우퍼 직경 | Two 5-inch x 2.25 inch racetrack woofers |
| 트위터 직경 | 1 인치 |
| 주파수 응답 | 70Hz ~ 20kHz |
| Power Handling (Continuous Pink Noise) | 80W (320W Peak, 2 hrs) |
| 스피커 최대 출력 전력 | 20 Watts (via multi-tap transformer) |
| 임피던스 | 8-ohm direct, or 70V/100V multi-tap transformer |
| 연결 기술 | Auxiliary (wired) |
| 오디오 출력 모드 | 단핵증 |
| 방수 레벨 | IP54(방수) |
| 색상 | 검은색 |
| 포함된 구성 요소 | 로우프로file Swivel (Pan) / Tilt WALL BRACKET, 2 x L-BRACKETS |
8. 보증 및 지원
8.1 제한 보증
The JBL COL600 Slim Column Speaker is covered by a Limited Warranty. Please refer to the warranty card included with your product or visit the official JBL Professional web보증 범위, 기간 및 청구 절차에 관한 자세한 약관은 해당 사이트를 참조하십시오.
8.2 고객 지원
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact JBL Professional customer support. You can find contact information and additional resources on the official JBL Professional web대지: pro.harman.com
