제품 끝view
The Miracase 3-in-1 Cell Phone Holder is a versatile mounting solution designed for your car. It offers three different installation methods: dashboard, air vent, and windshield, providing flexibility to suit various vehicle interiors and user preferences. This holder is engineered for secure grip and easy adjustability, ensuring your smartphone remains stable and accessible during your travels.
Figure 1: Miracase 3-in-1 Cell Phone Holder components.
Figure 2: Demonstrating the three mounting options: Dashboard, Air Vent, and Windshield.
설정 및 설치
1. Choosing Your Mounting Location
This holder provides options for dashboard, windshield, or air vent installation. Select the location that offers the best visibility and accessibility without obstructing your driving view 또는 차량 제어 장치.
2. Dashboard/Windshield Mount Installation
- 표면 청소: Ensure the chosen dashboard or windshield area is clean and free of dust or oils. Use an alcohol wipe if necessary and let it dry completely.
- 흡입 컵을 부착하세요: Press the suction cup firmly onto the desired smooth, flat surface.
- Lock the Suction: Push down the locking lever located at the base of the suction cup to create a strong vacuum seal.
- 팔 각도 조정: Loosen the adjustment knob on the arm to set the desired angle, then tighten it securely.
Figure 3: The robust suction cup provides a secure hold, capable of withstanding various temperatures.
3. Air Vent Mount Installation
- Attach Vent Clip: Slide the upgraded metal hook of the vent clip onto one of your car's air vent blades.
- 클립을 고정하세요: Tighten the screw on the vent clip to firmly clamp it onto the vent blade, preventing wobbling.
- 안정성 보장: Gently tug on the installed vent clip to confirm it is securely attached before mounting the phone holder.
Figure 4: Close-up of the upgraded vent clip with metal hook for enhanced stability.
Figure 5: Dimensions of the air vent clip for compatibility reference.
4. Attaching Phone Holder to Mount
Once your chosen mount (suction cup or vent clip) is securely installed, attach the phone holder cradle to the spherical joint on the mount. Tighten the collar around the joint to lock the cradle in place.
작동 지침
1. Placing and Removing Your Phone
- 오픈 CLamps: Press the release button located on the back of the phone holder to open the side clamp잉 팔.
- 전화번호를 입력하세요: Place your smartphone into the holder, ensuring it rests on the bottom support. The side clamps will automatically close to secure the phone.
- 휴대폰 제거: Press the release button again to open the clamps and carefully remove your phone.
2. 조정 View잉 각도
The Miracase phone holder features multiple adjustment points for optimal viewing:
- 360° 회전: The phone cradle can rotate a full 360 degrees, allowing for both portrait and landscape view잉 모드.
- 270° 각도 조정: The arm of the holder can be adjusted up to 270 degrees, enabling you to find the perfect vertical angle.
Figure 6: The holder offers extensive adjustability for optimal view각도를 나타냅니다.
3. 전화 호환성
This holder is designed to accommodate a wide range of smartphones, typically those with screen sizes between 4.0 and 7.0 inches. It is also compatible with various phone cases, including battery cases, wallet cases, OtterBox, and MagSafe cases, ensuring a secure fit without needing to remove your phone's protective cover.
Figure 7: Compatibility with various phone sizes and case types.
유지
- 흡착판 청소하기: If the suction cup loses its stickiness, rinse it with warm water and let it air dry. Do not use harsh chemicals or abrasive materials.
- 일반 청소: Wipe the phone holder with a soft, damp 먼지와 때를 닦아내는 천으로 사용하세요. 과도한 습기는 피하십시오.
- 저장: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight to preserve the integrity of the materials.
문제 해결
- 흡착판이 붙지 않음:
해결책: Ensure the mounting surface is clean, smooth, and dry. Re-wet the suction cup slightly with water, press firmly, and then engage the locking lever. Avoid porous or textured surfaces. - 휴대전화가 제대로 고정되지 않음:
해결책: Ensure the side clamping arms are fully closed around your phone. Press the release button and re-insert the phone, allowing the arms to auto-clamp장애물이 있는지 확인하십시오. - Vent Clip Wobbles:
해결책: Make sure the metal hook is fully inserted into the vent blade and the tightening screw is securely fastened. Some vent designs may not provide optimal stability. - 각도 조절이 어렵습니다.
해결책: Loosen the adjustment knobs sufficiently before attempting to change the angle or rotation. Tighten them firmly once the desired position is achieved.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | Miracase |
| 모델 번호 | 8ad21a1b-09de-4df8-8689-16518fb3ae13 |
| 장착 유형 | Dashboard / Air Vent / Windshield |
| 호환 장치 | 스마트폰 (4.0~7.0인치) |
| 품목 무게 | 9.1 온스 |
| 패키지 크기 | 5.04 x 4.76 x 2.64 인치 |
| 특별 기능 | Adjustable, Upgraded Metal Hook Vent Clip |
| 색상 | 파란색 |
| 원산지 | 중국 |
| 첫 번째 이용 가능 날짜 | 1년 2023월 XNUMX일 |
보증 및 지원
For warranty information and customer support, please refer to the official Miracase web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 구체적인 보증 조건은 지역 및 구매일에 따라 다를 수 있습니다.
