Fuel D80320001747

FUEL OFF-ROAD D803 FLAME 휠 사용 설명서

Model: D80320001747 | Brand: Fuel

소개

This manual provides essential information for the proper installation, maintenance, and care of your new Fuel Off-Road D803 Flame wheel. Please read this manual thoroughly before installation and retain it for future reference. Adhering to these guidelines will ensure optimal performance and longevity of your wheel.

제품 끝view

The Fuel Off-Road D803 Flame wheel is designed for durability and performance, featuring a distinctive gloss black milled finish. Key specifications include:

Fuel Off-Road D803 Flame Wheel, front view
그림 1: 전면 view of the Fuel Off-Road D803 Flame wheel, showcasing its gloss black milled finish and spoke design.

설정 및 설치

Proper installation is crucial for safety and performance. It is highly recommended that wheel installation be performed by a certified professional. Incorrect installation can lead to serious injury or damage.

설치 전 체크리스트:

  1. Verify that the wheel specifications (size, bolt pattern, offset, hub bore) match your vehicle's requirements. The hub bore for this wheel is 125.1mm.
  2. 타이어를 장착하기 전에 휠에 배송 중 파손이나 제조상의 결함이 있는지 검사하십시오.
  3. Ensure you have the correct lug nuts for the wheel and your vehicle.
  4. Confirm that the tires selected are compatible with the wheel size (20x10 inches).

설치 단계:

  1. 적절한 잭 스탠드를 사용하여 차량을 안전하게 들어 올리고 지지하십시오.
  2. Remove the old wheels.
  3. Clean the vehicle's hub mounting surface to ensure a flush fit.
  4. Mount the new wheel onto the hub, ensuring it seats properly.
  5. Install lug nuts by hand, ensuring they are not cross-threaded.
  6. Lower the vehicle partially until the tires just touch the ground.
  7. Torque the lug nuts to the vehicle manufacturer's recommended specifications using a calibrated torque wrench. Torque in a star pattern to ensure even pressure.
  8. 차량을 완전히 내립니다.
  9. After 50-100 miles of driving, re-torque all lug nuts to ensure they remain properly tightened.
각진 view of Fuel Off-Road D803 Flame Wheel
그림 2: 각도 view of the D803 Flame wheel, highlighting the intricate milled details on the spokes.

작동 고려 사항

While wheels do not have "operating" functions in the traditional sense, proper driving habits and awareness are essential for their longevity and your safety.

유지

Regular maintenance will preserve the appearance and structural integrity of your Fuel Off-Road wheels.

청소:

점검:

문제 해결

이 섹션에서는 자동차 휠에서 발생할 수 있는 일반적인 문제에 대해 다룹니다.

문제가능한 원인해결책
진동 또는 흔들림타이어 불균형, 휠 휨, 휠 너트 풀림, 서스펜션 부품 마모.Have tires balanced by a professional. Inspect wheels for damage. Re-torque lug nuts. Have suspension checked.
타이어 마모 불균형Incorrect tire pressure, improper alignment, worn suspension, bent wheel.Check and adjust tire pressure. Get wheel alignment. Inspect suspension. Inspect wheels for damage.
Air Leak Around RimImproper tire bead seating, damaged tire bead, bent rim flange, corroded rim.Re-seat tire bead. Inspect tire and wheel for damage. Seek professional repair or replacement if wheel is damaged.

명세서

Detailed technical specifications for the Fuel Off-Road D803 Flame wheel:

기인하다
제조업체Fuel OFF-ROAD
상표연료
모델D803 Flame 8
품목 무게55.5파운드
외부 마감Gloss Black Milled
제조업체 부품 번호디80320001747
림 직경20 인치
림 너비10 인치
볼트 패턴(구멍 수)8
Bolt Pattern (Pitch Circle Diameter)170 밀리미터
역행 키이4.79 인치
Hub Bore125.1mm

보증 및 지원

For information regarding warranty coverage and customer support, please refer to the official Fuel Off-Road website or contact your authorized dealer. Retain your proof of purchase for any warranty claims.

For additional assistance or technical inquiries, please visit the Fuel Off-Road Store on Amazon 또는 고객 서비스에 직접 문의하세요.

관련 문서 - 디80320001747

사전view Fuel CM055878 고속 무선 충전 거치대 사용 설명서
Fuel CM055878 고속 무선 충전 거치대에 대한 자세한 설명과 사양입니다. 포함된 구성품, 기능 및 안전 수칙을 포함하여 무선 차량용 충전기의 설치 및 사용 방법을 알아보세요.
사전view FUEL GO Filter Element 6µm Particulate Removal | GO37-13-2-SMX6 Data Sheet
Detailed data sheet for the FUEL GO Filter Element 6µm Particulate Removal (GO37-13-2-SMX6). Features high-efficiency 6-micron filtration, advanced glass fiber media, and robust construction for fuels, oils, and hydrocarbons.
사전view GO Filter Head DN32 (1 1/4") BSP F - High-Performance Filtration | FUEL Refuelling Solutions
Discover the FUEL GO Filter Head DN32, a robust aluminium filter head for hydraulic and lubrication systems. Features 1 1/4" BSP connection, 160 LPM flow rate, and 16 bar pressure rating. Ideal for low-pressure filtration applications.
사전view FUEL GO Filter Head Mechanical Differential Pressure Indicator GO-VI77669971 Datasheet
Technical datasheet for the FUEL GO Filter Head Mechanical Differential Pressure Indicator (GO-VI77669971). This device provides a clear visual alert for filter element status, actuating at 2.2 bar (32 PSI) differential pressure, and is compatible with FILTER GO heads.
사전view 카터 연료 펌프 카탈로그 C-2017-104 - 2017년 6월
고압 GDI 연료 펌프, 기계식 및 전기식 연료 펌프, 연료 펌프 어셈블리, 그리고 CleanScreen™ 기술을 소개하는 카터 연료 펌프 카탈로그 C-2017-104를 살펴보세요. 자동차 정비사를 위한 필수 연료 탱크 세척 지침이 포함되어 있습니다.
사전view Holley SNIPER Gen 5 Camaro 트윈 펌프 연료 모듈 설치 가이드(P/N 12-350)
홀리 스나이퍼 5세대 카마로 트윈 펌프 연료 모듈(부품 번호 12-350)의 종합 설치 안내서입니다. 포함 부품, 필수 품목, 모듈 I/O, 설치 단계, 배관, 배선 및 안전 예방 조치에 대한 내용을 다룹니다.