1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Weiser Powerbolt 2 Satin Chrome Keyless Entry Door Lock and the accompanying SmartKey Re-Key Kit. The Powerbolt 2 offers convenient keyless entry with a personalized access code and motorized one-touch locking. The SmartKey Re-Key Kit allows for quick and easy re-keying of your Weiser locks without professional assistance.
Figure 1: Weiser Powerbolt 2 Keyless Entry Door Lock and SmartKey Re-Key Kit Bundle. This image displays both the Powerbolt 2 deadbolt with its keypad and the SmartKey Re-Key Kit packaging, highlighting the complete security solution.
The Powerbolt 2 features a backlit keypad for enhanced visibility in low light conditions and an automatic locking function after 30 seconds for added security. It supports up to 6 user codes and operates on 4 AA batteries. The SmartKey technology provides advanced protection against common break-in techniques like picking and bumping, and allows you to re-key your lock in seconds.
2. 중요한 안전 정보
Please read and understand all instructions before installing and using this product. Keep this manual for future reference.
- 잠금 장치를 분해하거나 개조하지 마십시오. 이는 보증을 무효화하고 보안을 손상시킬 수 있습니다.
- 지정된 배터리 종류(AA 알카라인 배터리 4개)만 사용하십시오. 오래된 배터리와 새 배터리, 또는 종류가 다른 배터리를 혼용하지 마십시오.
- 오작동을 방지하기 위해 설치하는 동안 모든 구성 요소가 단단히 고정되어 있는지 확인하세요.
- 키패드를 과도한 습기나 직접적인 물에 노출되지 않도록 보호하세요.
- 배터리 수준을 정기적으로 확인하고 필요에 따라 배터리를 교체하여 계속 작동하도록 하세요.
- Keep your access codes confidential and change them periodically for enhanced security.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- Weiser Powerbolt 2 Keyless Entry Deadbolt (Exterior Keypad Assembly, Interior Assembly, Latch, Strike Plate)
- Weiser SmartKey Re-Key Kit (Includes 2 sets of keys: 4 Everyday Keys, 2 Alternate Keys, and SmartKey tool)
- 장착 나사
- 설치 안내서/사용자 설명서(본 문서)
- 4 AA Batteries (typically not included, but required for operation)
4. 설정 및 설치
4.1 Powerbolt 2 Deadbolt Installation
The Powerbolt 2 is designed for easy installation with just a screwdriver. Ensure your door has a standard bore hole of 2 1/8 inches and a door thickness between 1 3/8 inches and 1 3/4 inches.
- 문 준비: Check the door's bore hole and backset. Adjust the latch if necessary to fit the backset.
- 래치를 설치하십시오: 걸쇠를 문 가장자리에 끼우고 나사로 고정하십시오. 걸쇠 볼트가 올바른 방향을 향하고 있는지 확인하십시오.
- 외부 어셈블리 설치: Feed the cable and spindle through the bore hole. Position the exterior keypad assembly flush against the door.
- 내부 장착 플레이트 설치: Secure the interior mounting plate to the exterior assembly using the provided screws. Ensure the cable is routed correctly.
- 내부 조립 연결: Connect the cable from the exterior assembly to the interior assembly. Align the spindle with the slot on the interior assembly.
- 안전한 내부 조립: Attach the interior assembly to the mounting plate with screws.
- 배터리 설치: Insert 4 new AA alkaline batteries into the battery pack, observing polarity.
- 도어 핸딩 프로세스 수행: This step is crucial for the lock to learn the orientation of your door. Follow the specific instructions in the included quick start guide for your Powerbolt 2 model. Typically, this involves pressing a button on the interior assembly while the door is open and the latch is extended.
Figure 2: Weiser Powerbolt 2 installed on a door. This image shows the sleek appearance of the Powerbolt 2 deadbolt on a residential door, demonstrating its integration into a home security setup.
4.2 SmartKey Re-Key Kit Usage
The SmartKey Re-Key Kit allows you to re-key your Weiser lock in three easy steps without removing it from the door. This is useful for changing keys after moving or for consolidating multiple locks to a single key.
Figure 3: Weiser SmartKey Re-Key Kit packaging back. This image displays the rear of the SmartKey Re-Key Kit packaging, which typically includes visual instructions for the re-keying process.
- 현재 키를 삽입하세요: 현재 사용 중인 키를 실린더에 완전히 삽입하십시오.
- SmartKey 도구를 삽입하세요: While the current key is still in the cylinder, insert the SmartKey tool firmly and fully into the SmartKey hole. You will feel a slight click.
- Remove Current Key & Insert New Key: Remove the current key. Immediately insert the new key (from the SmartKey kit) fully into the cylinder. Turn the new key 90 degrees clockwise, then 90 degrees counter-clockwise. Remove the new key. Your lock is now re-keyed to the new key.
메모: Ensure the door is unlocked before starting the re-keying process. Test the new key multiple times before closing the door.
5. 사용 설명서
5.1 Powerbolt 2 Keyless Entry
Figure 4: Close-up of Powerbolt 2 keypad. This image provides a detailed view of the Powerbolt 2's backlit keypad, showing the numbered buttons and the lock/unlock button.
- 문 잠금 해제: Enter your 4-8 digit user code on the keypad. The deadbolt will retract, and the door will unlock.
- 문 잠그기:
- 원터치 잠금: Press the "Lock" button (padlock icon) on the keypad. The deadbolt will extend.
- 자동 잠금: The lock will automatically extend the deadbolt 30 seconds after being unlocked if no further action is taken. This feature can typically be enabled/disabled via programming.
- 키 사용: The lock can also be operated with a traditional key from the outside. From the inside, use the turn-button.
5.2 사용자 코드 프로그래밍
The Powerbolt 2 allows for up to 6 unique user codes. Refer to your specific model's quick start guide for detailed programming steps, as these can vary slightly. Generally, the process involves:
- 프로그래밍 모드로 들어가기: Press the "Program" button on the interior assembly (usually located near the battery pack).
- 마스터 코드 입력: Input your existing Master Code (if set) or the default programming code.
- 새로운 사용자 코드 추가: 화면의 지시에 따라 새로운 4~8자리 사용자 코드를 입력하세요.
- 확인하다: The lock will typically beep or flash to confirm successful programming.
중요한: It is highly recommended to change the default Master Code immediately after installation for security purposes.
Figure 5: Powerbolt 2 features graphic. This graphic illustrates key features of the Powerbolt 2, including One-Touch Locking, Master Code, Bump-Proof, User Codes, Pick-Proof, and Kick-In Resistant capabilities, highlighting its robust security.
6. 유지관리
- 배터리 교체: The Powerbolt 2 operates on 4 AA alkaline batteries. When the batteries are low, the lock will typically emit a series of beeps or a red light will flash after a successful code entry. Replace all four batteries simultaneously.
- 청소: 부드러운 천으로 키패드와 잠금장치 외부를 닦으세요.amp 천으로 닦으세요. 마감재나 전자 부품을 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마세요.
- 매끄럽게 하기: Periodically lubricate the latch bolt and deadbolt mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the cylinder itself.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 키패드 입력에 잠금 장치가 반응하지 않습니다. | Dead batteries; incorrect code entered; lock in programming mode. | Replace all 4 AA batteries. Ensure correct code is entered. Exit programming mode. |
| 데드볼트가 완전히 확장/수축되지 않습니다. | Misalignment with strike plate; low batteries; door handing process not completed. | Check strike plate alignment. Replace batteries. Perform door handing process. |
| Keypad lights up but lock doesn't operate. | Internal cable disconnected; mechanical binding. | Recheck internal cable connection during installation. Ensure no obstructions. |
| Cannot re-key lock with SmartKey Kit. | Incorrect current key; SmartKey tool not fully inserted; lock not unlocked. | Ensure you are using a working key. Insert SmartKey tool firmly until it clicks. Ensure lock is in the unlocked position. |
8. 사양
- 제품 유형: Keyless Entry Door Lock / Deadbolt Lock + Re-Key Kit
- 상표: 바이저
- 모델: 파워볼트 2
- 마치다: Satin Chrome (Polished)
- 재료: 금속
- 조각 수: 2 (Lock and Re-Key Kit)
- 특별 기능: Keyless Entry, Backlit Keypad, Motorized Auto Lock, SmartKey Re-Key Technology
- 사용자 코드: Up to 6 programmable user codes
- 전원: AA 알카라인 배터리 4개(포함되지 않음)
- 도어 두께 호환성: 1 3/8인치 - 1 3/4인치
- 보어 구멍 직경: 2 1/8인치
- 권장 사용: 보안
9. 보증 및 지원
Weiser products are manufactured to the highest standards of quality and technology. For specific warranty information regarding your Powerbolt 2 lock and SmartKey Re-Key Kit, please refer to the warranty card included with your product or visit the official Weiser web대지.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Weiser Customer Service. Contact information can typically be found on the product packaging or on the official Weiser web대지:
