Xiaomi Electric Scooter 4 사용 설명서

소개

Welcome to the user manual for your new Xiaomi Electric Scooter 4. This guide provides essential information on setting up, operating, maintaining, and troubleshooting your scooter to ensure a safe and enjoyable riding experience. Please read this manual thoroughly before first use and keep it for future reference.

중요한 안전 정보

Always prioritize safety when operating your electric scooter. Adhere to local traffic laws and regulations. Wear a helmet and appropriate protective gear. Avoid riding in adverse weather conditions or on slippery surfaces. Ensure the scooter is in good working order before each ride.

• 항상 헬멧과 보호 장비를 착용하세요.
• 주행 전에 브레이크, 타이어, 배터리 잔량을 점검하십시오.
• 알코올이나 약물의 영향을 받은 상태에서는 주행하지 마십시오.
• Observe speed limits and traffic regulations.
• Avoid riding on wet, icy, or uneven surfaces.
• 보행자 및 다른 차량과 안전 거리를 유지하십시오.

상자 안에 무엇이 들어있나요?

포장을 풀 때 다음 품목이 모두 포함되어 있는지 확인하세요.

• 샤오미 전기 스쿠터 4
• 배터리 충전기
• T-shaped Allen Key
• 연장 노즐
• 나사(x5)
• 사용자 설명서
• Important Information Specifications

설치 가이드

1. 스쿠터 펼치기

Carefully remove the scooter from its packaging. Lift the handlebar stem until it locks into place. Ensure the folding mechanism is securely latched.

Image: The Xiaomi Electric Scooter 4 in its fully unfolded state, ready for use.

2. 핸들바 조립

Connect the handlebar to the stem. Ensure all cables are properly connected and not pinched. Secure the handlebar using the provided screws and T-shaped Allen key. Tighten the screws alternately to ensure even pressure.

3. 초기 요금

Before first use, fully charge the scooter's battery. Connect the charger to the charging port located on the scooter and then to a power outlet. The charging indicator will show the charging status. A full charge takes approximately 5 hours.

이미지: 내부 view illustrating the battery pack within the scooter's deck.

4. 타이어 공기압 점검

Check the pressure of the 10-inch pneumatic tires. Proper tire pressure is crucial for ride comfort, safety, and battery efficiency. Use the extension nozzle if needed to inflate the tires to the recommended pressure (refer to the tire sidewall for details).

작동 지침

1. 전원 켜기/끄기 및 속도 모드

Press and hold the power button to turn the scooter on or off. Briefly press the power button to cycle through the three available speed modes: pedestrian (5 km/h), normal (15 km/h), and sport (20 km/h). The current speed mode will be displayed on the dashboard.

2. Lighting and Turn Signals

The scooter is equipped with front white/yellow lights, rear red lights, and integrated turn signals. Double-click the power button to turn the headlights and taillights on/off. Use the dedicated buttons on the handlebar to activate the left or right turn signals. An audible beep will sound when turn signals are active.

3. 브레이크 시스템

The scooter features a dual braking system with a disc brake on the rear wheel and an E-ABS system on the front wheel. Apply the brake lever gently to slow down. For emergency stops, apply firm pressure to the brake lever. The rear lights will flash when braking.

4. KERS Energy Recovery System

The Kinetic Energy Recovery System (KERS) helps extend battery life by converting kinetic energy into electrical energy during braking or coasting. This system operates automatically, contributing to the scooter's impressive range.

5. Xiaomi Home App Integration

Connect your scooter to the Xiaomi Home app via Bluetooth for enhanced control and features. The app allows you to monitor real-time speed, remaining charge, mileage information, and error diagnostics. You can also lock the scooter remotely for added security.

Image: The Xiaomi Electric Scooter 4 shown alongside a smartphone displaying the Xiaomi Home app interface, highlighting connectivity features.

유지

1. 타이어 관리

The 10-inch tubeless pneumatic tires offer excellent shock absorption and stability. Regularly check tire pressure and inspect for any signs of wear or damage. Proper tire maintenance helps prevent punctures and ensures a longer lifespan for your tires.

Image: The front wheel of the Xiaomi Electric Scooter 4 smoothly navigating a speed bump, demonstrating its shock absorption capabilities.

2. 배터리 관리

To maximize battery life, avoid completely draining the battery. Charge the scooter regularly, even if not in frequent use. Store the scooter in a cool, dry place when not in use for extended periods.

3. 일반 청소

스쿠터를 정기적으로 청소하세요.amp cloth. Avoid using high-pressure water jets or harsh chemicals, as these can damage electronic components. Ensure the charging port cover is securely closed to prevent water ingress.

문제 해결

If you encounter any issues with your Xiaomi Electric Scooter 4, please refer to the following common solutions:

• 스쿠터가 켜지지 않습니다. 배터리가 충전되어 있는지 확인하십시오. 전원 버튼을 몇 초 동안 길게 누르십시오.
• 감소된 범위: Check tire pressure. Ensure KERS is active. Avoid riding in sport mode excessively.
• 브레이크가 작동하지 않음: Inspect brake cables and disc brake for wear. Consult a service professional if issues persist.
• 앱 연결 문제: Ensure Bluetooth is enabled on your smartphone and the scooter. Restart both devices and try pairing again.
• 비정상적인 소음: 즉시 주행을 멈추고 스쿠터에 느슨한 부품이나 손상이 있는지 점검하세요.

For more complex issues, please contact Xiaomi customer support or an authorized service center.

명세서

보증 및 지원

For warranty information, please refer to the "Important Information Specifications" document included in your product packaging. For technical support, service, or spare parts, please visit the official Xiaomi web해당 웹사이트를 방문하거나 가까운 공인 대리점에 문의하십시오. 보증 청구를 위해 구매 영수증을 구매 증빙 자료로 보관하십시오.

또한 방문할 수 있습니다 아마존에서 샤오미 스토어를 만나보세요 자세한 제품 정보와 지원 리소스를 확인하세요.