1. 서론
This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Legrand Plexo Waterproof Housing for Surface-Mounting, 2 Positions, Grey (Model 069672L). Please read this manual thoroughly before beginning any work with the product and retain it for future reference.
2. 제품 오버view
The Legrand Plexo Waterproof Housing is designed for surface mounting and provides a robust, waterproof enclosure for electrical components. This model features two positions, allowing for the installation of two modules or devices. Its grey finish ensures discreet integration into various environments.
그림 2.1: 전면 view of the 2-position housing in vertical orientation.
그림 2.2: 전면 view of the 2-position housing in horizontal orientation.
3. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 069672리터 |
| 상표 | 르그랑 |
| 유형 | Waterproof Housing for Surface-Mounting |
| 위치 | 2 |
| 색상 | 회색 |
| 제품 치수 | 0.39 x 0.39 x 0.39 inches (approximate, as per listing) |
| 품목 무게 | 3.52 온스 |
| 제조업체 | 르그랑 |
| ASIN | B0BCQDHT36 |
4. 안전 정보
경고: 감전 위험이 있습니다. 설치는 모든 지역 및 국가 전기 규정을 준수하는 자격을 갖춘 전기 기술자만 수행해야 합니다.
- Always disconnect power at the main circuit breaker or fuse box before installing or servicing this product.
- 모든 배선 연결이 안전하고 적절하게 절연되었는지 확인하십시오.
- Do not exceed the maximum electrical ratings of the housing or any installed components.
- This product is designed for waterproof applications. Ensure all seals and covers are correctly installed to maintain its waterproof integrity.
- 전기 설비에 어린이가 접근하지 못하도록 하십시오.
5. 설치
Follow these steps for proper installation of your Legrand Plexo Waterproof Housing:
- 장착 표면 준비: Ensure the surface is clean, dry, and structurally sound.
- Disassemble the Housing: Carefully separate the components of the housing. The housing consists of a base body, insert, membrane seal, housing frame, and cover.
그림 5.1: 폭발 view of the housing components. Note the generous wiring space.
- Mount the Base Body: Secure the base body to the desired surface using appropriate fasteners.
- Wiring the Insert: The insert can be removed tool-free by pressing sideways for easier wiring. The wiring can be done separately from the base plate and then simply clicked into place. The shallow depth of the base plate allows wiring without needing to separate the insert from the base body.
Figure 5.2: Insert removal for wiring.
Figure 5.3: Wiring connected to the insert before final assembly.
Figure 5.4: Wiring within the assembled base and insert.
- Ensure Waterproof Seal: The housing includes a plaster compensation seal to level uneven surfaces, ensuring a proper waterproof seal.
Figure 5.5: Housing mounted with plaster compensation seal.
- 커버 부착: Once wiring is complete and the insert is securely in place, attach the cover. Unlatch, rotate, and re-engage the cover to secure it.
Figure 5.6: Steps for attaching the cover.
- 최종 확인: Verify all connections are tight and the housing is properly sealed to maintain its waterproof rating.
6. 운영
Once properly installed, the Legrand Plexo Waterproof Housing functions as a protective enclosure for the electrical devices mounted within it. Operation of the devices inside the housing will depend on their specific functions (e.g., switches, outlets). Ensure the cover is always securely closed to maintain environmental protection.
7. 유지관리
- 청소: Clean the exterior of the housing periodically with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 점검: Regularly inspect the housing for any signs of damage, cracks, or wear, especially around seals and cable entries. Replace the housing if any damage is found that could compromise its waterproof integrity.
- 씰 무결성: Ensure all seals remain intact and properly seated. If a seal appears damaged or degraded, it should be replaced to maintain the waterproof rating.
- 패스너: Periodically check that all mounting fasteners are tight.
8. 문제 해결
If you encounter issues with your Legrand Plexo Waterproof Housing, consider the following:
- 물 침투: If water is found inside the housing, immediately disconnect power to the enclosed devices. Check all seals, cable entries, and the cover for proper seating and damage. Ensure the mounting surface is even or that the plaster compensation seal is correctly applied.
- 느슨한 구성 요소: If any internal components feel loose, disconnect power and re-secure them according to installation instructions.
- 표지 닫기 어려움: Ensure no wires or debris are obstructing the cover's path. Check that the insert is fully seated.
For persistent issues or concerns, contact a qualified electrician or Legrand customer support.
9. 보증 및 지원
Legrand products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions applicable to your region and product, please refer to the official Legrand website or contact Legrand customer service directly.
For technical support, product inquiries, or to locate authorized service centers, please visit the official Legrand website or use the contact information provided with your purchase documentation.
본 설명서는 예고 없이 변경될 수 있습니다. 제조사 웹사이트에서 제공되는 최신 버전을 참조하십시오. web대지.
