소개
This manual provides detailed instructions for the installation, operation, and maintenance of the Juno RetroBasics 4-Inch LED Recessed Downlight Trim Kit. This all-in-one LED downlight is designed to fit 4-inch housings, offering 625 lumens of brightness and a 5-in-1 switchable white color temperature. It features a matte white smooth trim for reduced glare and uniform, energy-efficient lighting. Suitable for both new construction and retrofit projects, including wet locations, this product is dimmable down to 10% and built for long-lasting performance.
Please read these instructions thoroughly before installation and retain them for future reference.
안전 정보
경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
주의: Risk of fire. Use only in circuits rated for 120V AC. Do not use with dimmers not specifically designed for LED products. Consult a qualified electrician if you are unsure about installation.
- 모든 전기 연결은 지역 규정 및 조례는 물론 국가 전기 규격(NEC)을 준수해야 합니다.
- 배선을 변경, 이전 또는 제거하지 마십시오.amp holders, or other electrical components.
- This product is suitable for wet locations, making it ideal for bathrooms and showers.
- The fixture is IC-rated, meaning it can be used in direct contact with insulation.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Juno RetroBasics 4-Inch LED Recessed Downlight Trim Kit (Model: RB4S SWW5 MW M6)
- E26 Medium Base Socket Adapter (for retrofit installations)
- 설치 지침
Image: The Juno RetroBasics 4-Inch LED Recessed Downlight Trim Kit, showing the integrated LED module, trim, and quick connect wiring.
제품 특징
- Versatile LED Downlight: All-in-one design for general illumination in 4-inch housings.
- 5-in-1 Switchable White Color: Integrated switch allows selection of 2700K (Soft White), 3000K (Warm White), 3500K (Neutral), 4000K (Cool White), or 5000K (Daylight).
- 에너지 효율성: Delivers 625 lumens with low power consumption.
- 밝기 조절 가능: Compatible with most standard LED dimmers, dimmable down to 10%.
- 프리미엄 디자인: Molded thermal plastic housing with smooth trim and deep regression to minimize glare.
- 간편한 설치: Designed for quick installation into existing housings with medium base sockets or quick connect wiring.
- Durable & Certified: CSA certified to US and Canadian safety standards, rated for 50,000 hours, and suitable for wet locations.
Image: Visual guide demonstrating the five selectable color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) in a kitchen setting.
설치 지침
Before proceeding, ensure power is disconnected at the circuit breaker.
1. 전기 연결
The RetroBasics LED Trim Kit can be installed into existing housings with medium base sockets or dedicated quick connect housings.
- For existing housings with medium base sockets: Screw the E26 medium base socket adapter into the socket in the recessed housing. Then, plug the orange connector on the E26 socket adapter into the mating orange connector on the Trim Kit. Push firmly to ensure a secure connection.
- For dedicated quick connect housings: Plug the connector provided on the Trim Kit into the mating connector in the housing. Push firmly to ensure a secure connection.
Video: A detailed guide on how to install the Juno RetroBasics LED Trim Kit, demonstrating both medium base socket and quick connect housing installations.
2. 색온도 조정
Before final installation, select your desired color temperature using the switch located on the side of the LED Trim Kit. The available options are 2700K (Soft White), 3000K (Warm White), 3500K (Neutral), 4000K (Cool White), and 5000K (Daylight).
Image: Close-up of the Juno RetroBasics LED Trim Kit, highlighting the 5-in-1 switch for color temperature selection.
3. Installation into Recessed Housing
Once electrical connections are made and color temperature is set, proceed with securing the trim kit:
- For Spring Retention Clips (4-inch models): Center the LED Trim Kit in the housing opening. Gently push the Trim Kit up into the housing evenly on all sides until it is flush with the ceiling. Ensure the retention clips align with the recessed housing, avoiding interference with any protruding elements.
- For Torsion Springs (5/6-inch models, not applicable to this 4-inch model but for general reference): Squeeze each torsion spring together and seat them inside the housing torsion brackets. Release the springs and gently push the module into the housing until flush with the ceiling.
이미지: 측면 view of the 4-inch LED Trim Kit, illustrating the spring retention clips used for securing the fixture into the recessed housing.
작동 지침
After successful installation, restore power to the circuit. The LED downlight will illuminate according to the selected color temperature.
- 색온도: The color temperature is set via the switch on the fixture prior to installation. To change it, power must be disconnected, the fixture removed, the switch adjusted, and then reinstalled.
- 디밍 : This fixture is dimmable down to 10% with compatible LED dimmers. Ensure your dimmer is suitable for LED lighting to avoid flickering or damage.
유지
The Juno RetroBasics LED Trim Kit is designed for minimal maintenance.
- 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 부드러운 천으로 조명 기구를 닦으십시오.amp 천을 사용하십시오. 연마성 세척제나 용제를 사용하지 마십시오. 마감재나 전기 부품이 손상될 수 있습니다.
- Lamp 대사: The LED module is integrated and not user-replaceable. The fixture has a rated lifespan of 50,000 hours.
문제 해결
If you experience issues with your LED downlight, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | No power to the fixture, loose connection, incorrect wiring. | Check circuit breaker. Ensure all electrical connections are secure. Verify wiring is correct according to local codes. |
| 조명이 부적절하게 깜빡이거나 어두워집니다. | Incompatible dimmer, loose connection, faulty dimmer. | Ensure dimmer is compatible with LED lighting. Check electrical connections. Replace dimmer if necessary. |
| 색온도가 올바르지 않습니다. | 색온도 스위치 설정이 잘못되었습니다. | Disconnect power, carefully remove fixture, adjust the CCT switch on the back, and reinstall. |
| Light is not flush with the ceiling. | Retention clips not properly engaged or obstructed. | Ensure retention clips are fully engaged and not obstructed by housing elements. Re-seat the fixture evenly. |
If the problem persists after trying these solutions, contact a qualified electrician or Juno customer support.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | RB4S SWW5 MW M6 |
| 크기 | 4인치 |
| 스타일 | 기본형 | 조절 불가 | 매끄러운 마감 |
| 색상 | Switchable White (Matte White Trim) |
| 광 출력 | 625루멘 |
| 색온도(CCT) | 2700K, 3000K, 3500K, 4000K, 5000K (선택 가능) |
| 왓tage | 7.2 와트 |
| 권tage | 120V |
| 밝기 조절 가능 | Yes, down to 10% |
| 수명 | 50,000시간 |
| 제품 치수 | 5.28인치 길이 x 5.28인치 너비 x 2.09인치 높이 |
| 재료 | 폴리카보네이트 |
| 인증 | CSA, 에너지 스타 |
| 젖은 위치 정격 | 예 |
| IC 정격 | 예 |
보증 및 지원
This Juno RetroBasics LED Trim Kit is backed by a 5년 제한적 제조사 보증이 보증은 정상적인 사용 및 서비스 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다.
For warranty claims, technical support, or further assistance, please contact Acuity Brands Lighting customer service. Refer to the product packaging or the official Juno web최신 연락처 정보는 사이트에서 확인하세요.
제조업체: Acuity 브랜드 조명
