소개
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BSEED 3 Gang 2 Way Light Switch. Please read these instructions carefully before beginning installation and retain them for future reference.
The BSEED 3 Gang 2 Way Switch is designed to control a single light fixture from two different locations. This functionality is commonly used for staircases, long hallways, or large rooms with multiple entry points. This model features three individual switches on one panel, allowing control of up to three separate lighting circuits from two points each.
Key features include a durable flame-retardant ABS construction and a tempered crystal glass panel, offering both safety and a modern aesthetic. The switch is designed with child protection and electrical shock safety in mind.
안전 정보
- 전기적 위험: Installation must be performed by a qualified electrician or a person with appropriate electrical knowledge. Always ensure the main power supply is disconnected at the circuit breaker before attempting any installation or maintenance.
- 권tage: This switch is designed for 250V AC systems. Ensure your electrical system matches this requirement.
- 현재의: The maximum current rating is 10A. Do not exceed this load.
- 환경: Do not install in excessively humid or wet environments unless specifically rated for such conditions. This product is waterproof for general use but not submersible.
- 손상: Do not use if the product appears damaged. Contact customer support for assistance.
제품 끝view
The BSEED 3 Gang 2 Way Light Switch is a sleek, modern electrical switch designed for ease of use and safety. It features a glass panel and a rocker-style mechanism.
This image displays the dimensions of the BSEED 3 Gang 2 Way Switch, measuring 86mm x 86mm with a depth of 10-20mm. It also illustrates the required wall mounting box dimensions: width ≥60mm and depth ≥25mm, showing examples of suitable square and round boxes.
This image details the product specifications for the BSEED Glas Light Switch. Key features include being waterproof, flame-retardant, anti-scratch, and easy to clean. It lists the current as 16A, voltage 110-240V 50/60Hz, and available functions as 1/2/3 Way.
메모: This switch is a standard on/off switch and does not support WiFi connectivity or dimmer functionality. It features a glass panel for a modern aesthetic.
This image highlights important purchase notes, clarifying that the BSEED switch features a glass panel but does not include WiFi connectivity or dimmer functionality. It is a standard on/off switch.
설정 및 설치
시작하기 전에: Ensure the power to the circuit you are working on is turned OFF at the main circuit breaker. Use a voltag전원이 공급되지 않는지 확인하기 위해 테스터를 사용합니다.
필요한 도구:
- Screwdriver (appropriate size for terminal screws)
- 와이어 스트리퍼
- 권tag전자 테스터
- 전기 테이프 (옵션)
Wiring Instructions (2 Way Configuration):
The 2-way switch configuration allows you to control a single light from two different switch locations. This requires two 2-way switches and specific wiring connections.
- 전선 식별: In a 2-way setup, you will typically have a Live wire, a Neutral wire (for some switches, though not always directly connected to the switch itself), and two 'signal' or 'traveler' wires that connect the two switches.
- 라이브 와이어 연결: Connect the incoming Live wire to the 'L' terminal on the first switch (Switch1).
- 신호선을 연결하세요: Connect the two signal wires (often labeled L1 and L2 or similar) between the corresponding terminals on Switch1 and Switch2. For example, L1 from Switch1 connects to L1 on Switch2, and L2 from Switch1 connects to L2 on Switch2.
- 조명 전선을 연결하세요: From the second switch (Switch2), connect the wire going to the light fixture to the 'L' terminal.
- 보안 연결: Ensure all wire connections are tight and secure within the screw terminals.
This wiring diagram illustrates the connection method for two BSEED 3 Gang 2 Way switches. It shows how to connect the neutral wire, live wire, and signal terminals (La1, La2, Lb1, Lb2, Lc1, Lc2) between Switch1 and Switch2 to control a light from two locations.
스위치 장착:
- 벽면 박스를 준비하세요: Ensure your wall mounting box meets the specified dimensions (width ≥60mm, depth ≥25mm).
- 장착 프레임을 부착하세요: Secure the metal mounting frame to the wall box using the provided screws. Ensure the frame is oriented correctly.
- Snap in Switch Module: Carefully align the switch module with the mounting frame and snap it into place. Ensure it is securely seated. The side with CE and RoHS markings is the back side; use the front side when installing.
This image demonstrates how to correctly snap the switch module into its mounting frame. It highlights the 'Back' side with CE and RoHS markings and the 'Front' side to be used during installation, showing the secure attachment mechanism.
After installation, restore power at the main circuit breaker and test the switch functionality.
작동 지침
The BSEED 3 Gang 2 Way Light Switch operates as a standard rocker switch. Press the top or bottom of each individual switch to toggle the connected light circuit ON or OFF. In a 2-way setup, either switch can control the same light.
This diagram shows how a 2-way light switch system works, allowing a single light fixture to be controlled from two different switch locations within a house, such as at the top and bottom of a staircase.
백라이트 기능:
The switch features a backlight that illuminates in total darkness. This backlight is made of light-absorbing materials and requires exposure to ambient light to charge. If the switch is installed in a location that receives no light exposure, the backlight may not glow.
This image explains that the switch's backlight, made of light-absorbing materials, requires exposure to light to illuminate in total darkness. If the switch is in a consistently dark area, the backlight may not glow.
유지
The BSEED light switch is designed for low maintenance. Its tempered glass panel is anti-scratch and easy to clean.
- 청소: 유리 패널을 청소하려면 부드러운 천으로 살살 닦아주세요.amp 천을 사용하십시오. 연마성 세척제, 용제 또는 독한 화학 물질은 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 점검: Periodically inspect the switch for any signs of damage, loose connections, or unusual operation. If any issues are found, disconnect power and consult a qualified electrician.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지거나 꺼지지 않습니다. | No power to the switch; Loose wiring connection; Faulty light bulb/fixture; Incorrect wiring. | Check circuit breaker; Ensure all wires are securely connected; Test light bulb/fixture; Verify wiring against diagram (consult electrician if unsure). |
| Backlight does not glow | Insufficient light exposure for charging; Backlight component failure. | Ensure the switch is exposed to ambient light during the day; If problem persists, contact support. |
| 스위치가 벽에 헐렁하게 고정된 것 같습니다. | 장착 나사가 느슨합니다. | Turn off power at the circuit breaker. Carefully tighten the mounting screws. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 제조업체 | 비시드 |
| 모델 번호 | GL86S32GYEU |
| 제품 크기(L x W x H) | 8.6 x 8.6 x 2cm |
| 무게 | 180그램 |
| 크기 | 3갱 2방향 |
| 색상 | 회색 |
| 재료 | 크리스탈 유리 |
| 파워 타입 | AC |
| 권tage | 250 볼트 |
| 왓tage | 1000 와트 |
| 현재 평가 | 10아 |
| 품목 수량 | 1 |
| 스위치 유형 | 2방향 |
| 장착 유형 | 벽걸이형 |
| 스위치 스타일 | 흔들리는 것 |
| 인증 | CE, RoHS |
| 포함된 구성 요소 | 나사 |
| 배터리 포함 | 아니요 |
| 필요한 배터리 | 아니요 |
| 원산지 | 중국 |
| 작동 모드 | 온-오프 |
| 운영 볼륨tage | 250 볼트 |
| 연락처 유형 | 일반적으로 오픈 |
| 커넥터 유형 | 나사 |
| 단말기 | 나사 |
보증
For detailed warranty information, please refer to the retailer where you purchased the product or visit the official BSEED web사이트. 보증 약관은 지역 및 소매업체에 따라 다를 수 있습니다.
고객 지원
If you encounter any issues or have questions not covered in this manual, please contact BSEED customer support through their official website or the contact information provided by your retailer. When contacting support, please have your product model number (GL86S32GYEU) and purchase details ready.
