InnoGIO GIOwarm Smart Digital Bottle Warmer & Sterilizer

1. 안전 정보

Please read all instructions carefully before using the InnoGIO GIOwarm Smart Digital Bottle Warmer & Sterilizer. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 항상 어린이의 손이 닿지 않는 곳에 기기를 보관하십시오.
• 본체를 물이나 기타 액체에 담그지 마십시오.
• 볼륨을 확보하세요tag기기에 표시된 e는 해당 지역의 주 전원에 해당합니다.tag연결하기 전에 e를 누르세요.
• 제품을 사용하지 않을 때와 청소하기 전에 전원 콘센트에서 제품의 플러그를 뽑으십시오.
• 코드나 플러그가 손상된 경우 또는 기기가 오작동하거나 어떤 식으로든 손상된 경우에는 기기를 작동하지 마십시오.
• 제조업체가 권장하는 액세서리만 사용하세요.
• Always check the temperature of the warmed food or milk before feeding your baby.
• 이 제품은 가정용으로만 사용하세요.
• Exercise caution when handling hot steam and hot water.

2. 제품 오버view

The InnoGIO GIOwarm Smart is a versatile device designed to warm baby bottles, food, and sterilize baby accessories. It features a compact design and an intuitive digital control panel.

Image: The InnoGIO GIOwarm Smart Digital Bottle Warmer and Sterilizer, shown next to its product packaging. The device is white with a clear top cover and a digital control panel on the front. The packaging displays the product name and features.

구성 요소:

• Main Unit (Base with heating plate and control panel)
• 투명 커버
• Basket/Lift-out tray (for bottles/accessories)
• Measuring Cup (may be included for water measurement)

3. 설정

1. 풀다: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 나중에 보관하거나 운반할 수 있도록 포장을 보관하세요.
2. 깨끗한: Before first use, clean all parts that will come into contact with milk or food. Wipe the main unit with a damp cloth. Wash the transparent cover and basket in warm soapy water, then rinse thoroughly.
3. 놓기: Place the main unit on a stable, flat, heat-resistant surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
4. 전원 연결: Plug the power cord into a suitable electrical outlet. The device will typically emit a beep and the display may light up briefly.

4. 작동 모드

The GIOwarm Smart offers 5 distinct operating modes, accessible via the intuitive digital control panel.

4.1. Quick Heating Mode

This mode is designed for rapidly heating milk or baby food to a desired temperature.

1. Place the bottle or food jar into the basket and then into the main unit.
2. Add the appropriate amount of water (refer to the manual for specific quantities based on bottle size/food volume).
3. Select the "Quick Heating" mode on the control panel.
4. Adjust the target temperature (e.g., 37°C for milk) using the temperature controls.
5. The device will begin heating and automatically shut off once the target temperature is reached.
6. Carefully remove the bottle/jar using the basket handle and check the temperature before feeding.

4.2. Keep Warm Mode

This mode maintains a constant temperature for a prolonged period, ideal for night feedings.

1. Follow steps 1-2 from Quick Heating Mode.
2. Select the "Keep Warm" mode.
3. Set the desired holding temperature. The device will heat to this temperature and then maintain it.

4.3. 해동 모드

냉동된 모유나 이유식을 안전하게 해동합니다.

1. Place the frozen item (e.g., breast milk bag, food jar) into the basket.
2. Add water to the main unit as specified for defrosting.
3. Select the "Defrost" mode. The device will gently thaw the contents.
4. Once defrosted, the item can be further warmed if needed using Quick Heating or Breast Milk Warming mode.

4.4. Breast Milk Warming Mode

This mode uses a gentle heating process to preserve nutrients in breast milk.

1. Place the bottle with breast milk into the basket.
2. Add water to the main unit.
3. Select the "Breast Milk Warming" mode. This mode typically operates at a lower, controlled temperature (e.g., 37°C) to avoid overheating.
4. The device will gently warm the milk. Always check the temperature before feeding.

4.5. Sterilization Mode

This mode uses steam to sterilize bottles, pacifiers, and other small baby accessories, eliminating up to 99.9% of bacteria.

1. Ensure items to be sterilized are clean and rinsed.
2. Place bottles (upside down) and other accessories into the basket.
3. Add the recommended amount of water (e.g., 100-120ml) to the main unit. Do not overfill.
4. Place the transparent cover securely on the unit.
5. Select the "Sterilization" mode. The device will generate steam to sterilize the contents.
6. Once the cycle is complete, the device will automatically shut off. Allow items to cool before carefully removing them.

5. 유지관리 및 청소

Regular cleaning and maintenance ensure optimal performance and longevity of your InnoGIO GIOwarm Smart.

5.1. 매일 청소

• 청소하기 전에 항상 제품의 플러그를 뽑고 완전히 식히십시오.
• 본체 외부를 광고용 세제로 닦아주세요.amp 옷감. 연마성 세척제를 사용하지 마십시오.
• Wash the transparent cover and basket in warm soapy water, then rinse thoroughly and air dry.
• Empty any remaining water from the heating plate after each use.

5.2. 석회질 제거

Mineral deposits (limescale) can build up on the heating plate, especially in areas with hard water. Descale the unit regularly (e.g., once a month or as needed).

1. 흰 식초 50ml를 찬물 100ml에 섞으세요.
2. 혼합물을 가열판 위에 부으세요.
3. Allow it to soak for 30 minutes to 1 hour, or until the limescale dissolves. Do not turn on the appliance during this process.
4. Pour out the mixture and rinse the heating plate thoroughly with clean water.
5. 깨끗한 천으로 물기를 닦아내세요.

6. 문제 해결

If you encounter issues with your InnoGIO GIOwarm Smart, refer to the following common problems and solutions:

7. 사양

• 모델: GIO-935PINK
• 상표: 이노지오
• 전력 소비량: 400와트
• 조절 가능한 온도 범위: 35°C ~ 100°C
• 치수: 크기는 약 28 x 11 x 11cm (높이 x 너비 x 깊이)입니다.
• 재료 구성: 합성소재
• ASIN: B09NCCPRQF

8. 보증 및 지원

For warranty information and customer support, please refer to the warranty card included with your product or visit the official InnoGIO web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

제조업체: 이노지오

Web대지: www.innogio.com (참고: 이것은 플레이스홀더입니다. URL. Please refer to your product documentation for the correct support contact information.)