VECTOR PPRH5V

VECTOR PPRH5V Automotive Jump Starter User Manual

Model: PPRH5V

제품 끝view

The VECTOR PPRH5V is a versatile 6-in-1 portable power station designed to provide reliable power for various automotive and outdoor needs. It features a powerful jump starter, a 500W power inverter, a 120 PSI air compressor, and a 10W USB port for charging electronic devices. Its rugged construction ensures durability, and the digital display provides clear operational information.

VECTOR PPRH5V Automotive Jump Starter

그림 1: 전면 view of the VECTOR PPRH5V Automotive Jump Starter.

중요한 안전 정보

WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

상자 안에 무엇이 들어있나요?

The VECTOR PPRH5V package includes the following components:

Contents of the box for VECTOR PPRH5V

Figure 2: Included components: Jump Starter unit and Sports Needle Adapter.

설정 및 충전

Before first use, fully charge the unit. Regular charging is recommended to maintain battery health.

초기 충전

  1. Locate the built-in AC charging adapter on the unit.
  2. Plug the AC charging adapter into a standard 120V AC wall outlet.
  3. The digital display will indicate charging status. Charge until the unit shows a full charge.
Close-up of the built-in AC charging adapter

Figure 3: Built-in 120V AC Charging Adapter for convenient recharging.

배터리 상태 확인

The digital display provides real-time battery status. Ensure the unit is adequately charged before use, especially for jump-starting.

Digital display showing battery status and PSI

Figure 4: Easy-to-read digital display showing operational information like PSI and battery status.

작동 지침

1. 차량 점프 스타트

The PPRH5V provides 1200 peak amps for jump-starting cars and trucks up to 8-cylinders. The Engine Start Smart Controller offers reverse polarity protection.

  1. 차량의 점화 장치가 꺼져 있고 모든 부속품의 플러그가 뽑혀 있는지 확인하세요.
  2. 빨간색 양극(+) cl을 연결합니다.amp 차량 배터리의 양극(+) 단자에 연결합니다.
  3. 검은색 음극(-) cl을 연결합니다.amp to a non-painted metal part of the vehicle's chassis, away from the battery.
  4. Turn on the Jump-Starter Power Switch on the unit.
  5. Attempt to start the vehicle. If it doesn't start immediately, wait a few minutes and try again.
  6. Once the vehicle starts, disconnect the black negative (-) clamp first, then the red positive (+) clamp.
Man connecting jump starter clamp자동차 배터리에

Figure 5: Proper connection of jump starter clamps to a vehicle battery.

2. Using the 500W Power Inverter

The unit provides 500 watts of household power via its dual 120V AC outlets for small appliances and tools.

  1. 장치가 충분히 충전되었는지 확인하세요.
  2. Plug your appliance or tool into one of the 120V AC outlets.
  3. Turn on the AC/USB Power switch.
  4. Monitor the digital display for power output information.
VECTOR PPRH5V charging a phone and powering a light

Figure 6: The unit can power and charge multiple devices simultaneously.

3. Using the 120 PSI Air Compressor

Inflate tires or sports equipment with the built-in 120 PSI air compressor. It features a digital autostop to prevent over-inflation and a 10-minute auto shut-off timer.

  1. Attach the air hose to the tire valve or use the sports needle adapter for other inflatables.
  2. Set the desired PSI using the '+' and '-' buttons on the control panel.
  3. Press the AIR button to start inflation. The compressor will automatically stop when the set pressure is reached.
  4. The compressor has a 10-minute auto shut-off timer to prevent overheating.
Digital display showing 120 PSI for air compressor

Figure 7: Digital display indicating air pressure during inflation.

10 Minute Timer for air compressor auto shut-off

Figure 8: The air compressor features a 10-minute auto shut-off timer to prevent overheating.

4. Using the USB Charger

The 10W USB port allows you to charge and power various electronic devices like phones, tablets, and gaming devices.

  1. Connect your device's USB charging cable to the USB port on the unit.
  2. Turn on the AC/USB Power switch.
  3. 기기가 충전을 시작할 것입니다.

5. LED 작업등 사용

통합 LED 작업 조명은 어두운 환경에서도 조명을 제공합니다.

유지

Proper maintenance ensures the longevity and optimal performance of your VECTOR PPRH5V unit.

문제 해결

문제가능한 원인해결책
기기가 켜지지 않습니다.배터리가 완전히 방전되었습니다.장치를 완전히 충전하십시오.
차량 점프 스타트가 불가능합니다.잘못된 clamp connection; Vehicle battery severely discharged; Unit not sufficiently charged.확인 CLamp connections for proper polarity; Allow unit to charge vehicle battery for a few minutes before attempting to start; Recharge the unit.
Air compressor does not inflate.Hose not securely attached; Compressor overheated (auto shut-off engaged).Ensure hose is tightly connected; Allow compressor to cool down for 10-15 minutes before reattempting.
USB port or AC outlets not providing power.AC/USB Power switch is off; Unit battery low; Device draws too much power.Ensure AC/USB Power switch is on; Recharge the unit; Check device power requirements against unit's output.

명세서

특징세부 사항
상표벡터
모델 번호PPRH5V
Jump Starter Peak Amps1200 Amps
Power Inverter Output500와트(120V AC)
공기 압축기 압력120파운드
USB 포트 출력10W(2.1A)
품목 무게18.7 파운드
제품 치수15인치 깊이 x 13인치 너비 x 5.9인치 높이
배터리 유형Internal Rechargeable (type not specified, likely sealed lead-acid)

보증 및 지원

The VECTOR PPRH5V unit comes with a 1년 한정 보증 from the date of purchase, covering defects in material and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, warranty service, or to inquire about replacement parts, please contact VECTOR customer service. Refer to the official VECTOR web가장 최신 연락처 정보는 해당 사이트나 구매 문서를 참조하세요.

You can also visit the official VECTOR store on Amazon for more product information and support: VECTOR Store.

관련 문서 - PPRH5V

사전view VECTOR PPRH5V 전문 발전소 사용 설명서
This manual provides comprehensive instructions for operating and maintaining the VECTOR PPRH5V Professional Power Station. It covers features, safety guidelines, jump-starting, air compression, AC/DC/USB power output, charging, troubleshooting, and specifications.
사전view VECTOR PPRH5V 전문 발전소 사용 설명서
Comprehensive instruction manual for the VECTOR PPRH5V Professional Power Station, covering features, safety guidelines, operation, troubleshooting, and specifications for jump starting, power supply, and air compression.
사전view Vector Professional Power Station Instruction Manual
Comprehensive instruction manual for the Vector Professional Power Station, covering features, operation, safety guidelines, troubleshooting, and specifications for jump-starting, air compression, and AC/USB power output.
사전view Vector Professional Power Station Instruction Manual
Comprehensive instruction manual for the Vector Professional Power Station (PPRH5V). Covers features, safety guidelines, operation for jump starting, air compression, and power supply, along with maintenance and troubleshooting.
사전view Vector SS6LV Lithium Jump-Starter & USB Power Bank Instruction Manual
Comprehensive instruction manual for the Vector SS6LV Lithium Jump-Starter & USB Power Bank, covering safety guidelines, operating instructions, charging procedures, care and maintenance, troubleshooting, and specifications.
사전view Vector J312V Compact Jump Starter Instruction Manual
Instruction manual for the Vector J312V Compact Jump Starter, covering features, safety guidelines, charging, jump-starting procedures, portable power supply, and warranty information.