소개
This manual provides essential information for the proper setup, operation, and maintenance of your Dual CS 429 Fully Automatic Turntable. Please read these instructions carefully before using the device to ensure optimal performance and longevity.
The Dual CS 429 is engineered for high-fidelity audio playback with user-friendly automatic functions. Its robust construction, including a solid MDF plinth and a die-cast aluminum platter, is designed to minimize vibrations and enhance sound quality. The turntable features a straight, statically balanced tonearm for precise tracking.
설정
1. 풀기 및 배치
- 모든 구성품을 포장에서 조심스럽게 꺼내세요. 나중에 운반하거나 보관할 수 있도록 포장을 보관하세요.
- 턴테이블을 직사광선, 열원 및 과도한 진동을 피해 안정적이고 평평한 곳에 놓으십시오.
- 장치 주변에 적절한 환기가 이루어지도록 하세요.
2. Platter and Mat Installation
- Gently place the die-cast aluminum platter onto the turntable spindle.
- Position the heavy rubber mat on top of the platter.
이미지: 클로즈업 view of the Dual CS 429 turntable's internal platter mechanism, showing the spindle and belt drive components before the platter is placed.
3. Tonearm Balance and Anti-Skating
- Follow the detailed instructions in the included quick start guide for precise tonearm balancing and anti-skating adjustment. Correct adjustment is crucial for optimal sound quality and to prevent record wear.
4. Audio and Power Connections
- Connect the RCA audio cables from the turntable's 'AUDIO OUT' to your amplifier's 'PHONO' input. If your amplifier does not have a dedicated 'PHONO' input, use the turntable's built-in pre-amplifier by setting the 'PHONO/LINE' switch to 'LINE' and connecting to a standard 'LINE IN' input.
- Connect the ground wire (GND) to your amp앰프의 접지 단자는 험 노이즈를 최소화합니다.
- Plug the power adapter into the 'DC IN 12V' port on the rear of the turntable, then into a wall outlet.
Image: The rear panel of the Dual CS 429 turntable, showing the RCA audio outputs, ground terminal, PHONO/LINE switch, and DC 12V power input.
작동 지침
1. 전원 켜기 / 끄기
- Locate the power button on the rear panel of the turntable. Press it to turn the unit on or off.
2. 재생 속도 선택
- Use the speed selector knob on the front panel to choose between 33, 45, or 78 RPM, matching the speed of your record.
3. Automatic Playback
- 플래터에 레코드를 놓습니다.
- Press the 'START' button. The tonearm will automatically move to the beginning of the record and lower the stylus.
- At the end of the record, the tonearm will automatically lift, return to its rest, and the platter will stop spinning.
4. Manual Playback (Optional)
- To manually cue a record, gently lift the tonearm using the cueing lever. Position the tonearm over the desired track and lower the cueing lever to drop the stylus.
- To stop playback manually, lift the tonearm with the cueing lever and return it to its rest. Press the 'STOP' button to halt the platter.
Image: A top-down perspective of the Dual CS 429 turntable with a vinyl record spinning on the platter and the tonearm tracking the grooves.
유지
1. 청소
- 먼지 커버: Regularly wipe the dust cover with a soft, dry, anti-static cloth. Avoid abrasive cleaners.
- 첨필: Use a soft brush designed for stylus cleaning, brushing gently from back to front. Clean the stylus before each play session.
- 기록 : Keep your records clean using a record brush or cleaning solution to prevent dust and debris from damaging the stylus and affecting sound quality.
2. Stylus and Cartridge Replacement
- The stylus (needle) is a consumable part and will wear out over time. Replace it according to the manufacturer's recommendations or if you notice a degradation in sound quality.
- Refer to the cartridge manufacturer's instructions for specific replacement procedures.
문제 해결
- 소리 없음: Check all audio connections to your amplifier. Ensure the 'PHONO/LINE' switch is set correctly. Verify your amplifier input is selected and volume is up.
- Skipping or Distortion: Ensure the tonearm is properly balanced and the anti-skating is correctly set. Clean the record and stylus. Check for any physical damage to the record or stylus.
- 잘못된 속도: Verify the speed selector knob is set to the correct RPM (33, 45, or 78) for the record being played.
- 허밍 소음: Ensure the ground wire is securely connected between the turntable and your amplifier. Check for proper power connections and ensure no other electronic devices are causing interference.
명세서
- 모델: CS 429
- 상표: 듀얼
- 제품 크기: 17.32 x 14.57 x 5.91 인치
- 품목 무게: 17.31파운드(7.87킬로그램)
- 플래터 재질: 다이캐스트 알루미늄
- Plinth Material: Solid MDF (Engineered Wood)
- 톤암 : Straight, Statically Balanced, Solid Aluminum with Ball-Bearings
- 작업: Fully Automatic Belt Drive
- 최대 회전 속도: 78 RPM
- 포함된 구성 요소: 먼지 커버
- 호환 장치: 스피커, 헤드폰
- 색상: 검은색
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official DUAL Electronics web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
