제품 끝view
The VECTOR SS6LV is a compact and powerful 1200 peak amp lithium jump starter designed to instantly start cars and trucks with up to 8-cylinder engines. Beyond its primary function, it serves as a versatile portable power bank, featuring USB-A (2.1 Amps) and USB-C (3.1 Amps) ports for charging various electronic devices. It also includes an integrated LED work light for convenience in low-light conditions. The unit is equipped with a Smart Controller for safe operation, providing reverse polarity protection, and comes with heavy-duty powder-coated clamps.
Image: The VECTOR SS6LV jump starter with its attached heavy-duty clamps, 쇼크asin컴팩트한 디자인입니다.
상자 안에 무엇이 들어있나요?
패키지를 열면 다음과 같은 구성품이 들어 있습니다.
- VECTOR SS6LV Lithium Jump Starter Unit
- Smart Controller with Heavy Duty Powder Coated Clamps
- AC 충전 어댑터
- DC (Car) Charging Adapter
- USB 충전 케이블
Image: All components included in the VECTOR SS6LV product box.
제품 특징
- 점프 스타터: 최대 1200의 출력을 제공합니다. amps, capable of jump starting vehicles with up to 8-cylinder engines.
- USB 충전기: Equipped with USB-A (2.1 Amps) and USB-C (3.1 Amps) ports to charge and power various electronic devices such as phones, tablets, and laptops.
- 충전식 리튬 배터리: Internal lithium-ion battery can be recharged using the included AC, DC, or USB adapters.
- 안전한 작동 : Features an Engine Start Smart Controller with reverse polarity protection, ensuring correct and safe connection of jumper cables.
- 휴대성 있는 디자인: Compact and lightweight, making it easy to store and transport for on-the-go power needs.
- LED 작업등: Integrated bright LED light provides illumination for nighttime or low-light situations.
이미지: 상세 view of the VECTOR SS6LV unit with key features labeled.
설정
초기 충전
Before first use, fully charge the VECTOR SS6LV unit. It is recommended to fully charge the unit every 3 to 6 months to maintain optimal battery health, even if not in use.
- Connect the USB Charging Cable to the unit's USB-C port.
- Connect the other end of the USB Charging Cable to either the AC Charging Adapter (for wall outlet) or the DC Charging Adapter (for vehicle 12V accessory outlet).
- Plug the chosen adapter into its respective power source. The battery indicator lights on the unit will illuminate to show charging progress.
- Charging is complete when all indicator lights are solid blue.
Connecting for Jump Start
점프 스타터를 연결하기 전에 차량의 점화가 꺼져 있는지 확인하세요.
- Locate the battery terminals in your vehicle. The positive terminal is usually marked with a "+" sign and covered by a red cap. The negative terminal is marked with a "-" sign.
- 빨간색(양수) cl을 연결합니다.amp of the Smart Controller to the positive (+) terminal of the vehicle's battery.
- 검은색(음극) cl을 연결하세요amp of the Smart Controller to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if safe to do so.
- Plug the Smart Controller cable into the "ENGINE START" port on the VECTOR SS6LV unit. The Smart Controller will indicate readiness (e.g., a solid green light).
이미지: 차량 배터리에 연결된 점프 스타터가 사용 준비가 되었습니다.
운영
점프 스타트 차량
- Ensure the VECTOR SS6LV unit is fully charged and properly connected to the vehicle's battery as described in the "Setup" section.
- Once the Smart Controller indicates readiness (e.g., solid green light), attempt to start the vehicle's engine. Do not crank for more than 5 seconds.
- If the vehicle does not start, wait at least 30 seconds before attempting again. Do not exceed three consecutive jump start attempts.
- Once the vehicle starts, immediately disconnect the Smart Controller from the VECTOR SS6LV unit, then disconnect the black (negative) clamp, followed by the red (positive) clamp 차량 배터리에서.
파워 뱅크로 사용
The VECTOR SS6LV can charge various electronic devices.
- Connect your device's USB charging cable to either the USB-A (2.1 Amps) or USB-C (3.1 Amps) port on the side of the VECTOR SS6LV unit.
- Press the power button on the unit to begin charging. The indicator lights will show the remaining battery level.
Image: The jump starter unit actively charging a smartphone.
LED 작업등 사용
The integrated LED work light provides illumination for various tasks.
- To turn on the LED work light, press and hold the power button for approximately 3 seconds.
- To cycle through light modes (solid, strobe, SOS), briefly press the power button.
- To turn off the LED work light, press and hold the power button again for approximately 3 seconds.
Image: The bright LED work light on the end of the unit.
유지
장치 재충전
To ensure the longevity and readiness of your VECTOR SS6LV, it is crucial to maintain its charge. Recharge the unit after each use, and at least every 3 to 6 months, even if it has not been used. This prevents deep discharge and prolongs battery life.
저장
Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children. Ensure the rubber covers for the ports are securely closed to protect against dust and moisture.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기가 켜지지 않습니다. | 배터리가 완전히 방전되었습니다. | Recharge the unit using the provided AC or DC adapters. |
| 차량 점프 스타트가 불가능합니다. | 잘못된 clamp connection; vehicle battery is severely damaged; vehicle engine is too large for the unit's capacity. | CL을 확인amps are connected correctly (red to positive, black to chassis/negative). Check Smart Controller indicator. Consult a mechanic if battery is damaged. Confirm vehicle engine size is within the unit's specifications (up to 8-cylinders). |
| Smart Controller shows error. | Reverse polarity connection; short circuit; over-temperature. | cl 연결 해제amps and re-connect correctly. Ensure clamps do not touch each other. Allow unit to cool down if it has been used extensively. |
| USB를 통해 충전되지 않는 기기. | Unit is off; USB cable is faulty; device is not compatible. | Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with standard USB charging. |
명세서
- 상표: 벡터
- 모델 번호: SS6LV
- 제품 크기: 3인치 깊이 x 1인치 너비 x 7인치 높이
- 품목 무게: 13.8 온스
- Amp나이: 1200 Amps
- 피크 출력 전류: 1200 Amps
- 배터리 유형: 리튬 이온(1개 필요, 포함)
- USB-A 출력: 2.1 Amps
- USB-C 출력: 3.1 Amps
- 제조업체: 바커스 글로벌 LLC
- 원산지: 중국
안전 정보
경고: 이 제품은 납 및 납 화합물을 포함한 화학 물질에 노출될 수 있으며, 이는 캘리포니아 주에서 암, 선천적 기형 또는 기타 생식 기능 손상을 유발하는 것으로 알려져 있습니다. 자세한 내용은 다음으로 이동하십시오. www.P65Warnings.ca.gov.
Always refer to the full user manual for complete safety instructions and warnings before operating this device.
공식 제품 영상
Watch this official video from VECTOR to understand the key differences between battery chargers and jump starters, and how the VECTOR SS6LV functions.
Video: "VECTOR - Charger vs Jumper" - This video explains the distinction between battery chargers and jump starters, highlighting the immediate boost provided by a jump starter like the SS6LV.
