Dyson Big-Ball Turbine Floor Nozzle for CY26 CY28 (Model 966043-15) Instruction Manual

1. 제품 오버view

The Dyson Big-Ball Turbine Floor Nozzle (Model 966043-15) is designed to enhance the cleaning performance of compatible Dyson vacuum cleaners. This turbine nozzle is specifically engineered for effective floor cleaning.

주요 특징:

• Turbine Nozzle: Features a turbine-driven brush bar for efficient dirt and debris pickup.
• 호환성: Designed for Dyson CY26 and CY28 models. Please verify your appliance's compatibility before use.
• 부품 번호: 966043-15.

이미지 1: 각도 view of the Dyson Big-Ball Turbine Floor Nozzle. This image shows the overall design of the nozzle, including the brush bar and the connection point.

2. 설정 지침

Follow these steps to properly attach the Turbine Floor Nozzle to your compatible Dyson vacuum cleaner.

1. 호환성 확인: Ensure your Dyson vacuum cleaner is a CY26 or CY28 model. This nozzle is not compatible with battery-powered vacuum cleaners.
2. Align Connection: Locate the connection point on your vacuum's wand or hose. Align the nozzle's connector with the vacuum's attachment point.
3. 안전한 첨부 파일: Push the nozzle firmly onto the vacuum's attachment point until it clicks securely into place. A secure connection is essential for optimal performance.

이미지 2: 클로즈업 view of the nozzle's connection point, highlighting the red release button. This shows how the nozzle connects to the vacuum wand.

Image 3: Diagram illustrating a typical conical connection for vacuum attachments. This visual aid helps users understand the general method of attaching vacuum accessories.

3. 사용 설명서

Once the Turbine Floor Nozzle is securely attached, you can begin cleaning. This nozzle is designed for various floor types, but optimal performance may vary.

• 전원 켜기: Turn on your Dyson vacuum cleaner. The turbine brush bar within the nozzle will activate.
• 청소 기술: Move the vacuum across the floor surface in a steady, overlapping motion. The rotating brush helps agitate carpet fibers and sweep debris from hard floors.
• 바닥 유형: Effective on carpets, rugs, and hard floors. For delicate surfaces, observe performance and adjust vacuum settings if available.

4. 유지관리

Regular maintenance ensures the longevity and optimal performance of your Turbine Floor Nozzle.

1. Inspect Brush Bar: Periodically check the brush bar for tangled hair, threads, or debris. Excessive build-up can reduce performance.
2. Clean Brush Bar: To remove tangled material, use scissors to carefully cut along the brush bar. Avoid cutting the bristles themselves.
3. 장애물 제거: Ensure the air pathways within the nozzle are clear of any blockages.

이미지 4: 앞면 view of the Dyson Big-Ball Turbine Floor Nozzle, showing the brush bar. This view is useful for inspecting the brush for debris.

이미지 5: 하단 view of the Dyson Big-Ball Turbine Floor Nozzle, showing the brush bar and wheels. This perspective is helpful for cleaning and inspecting the underside of the nozzle.

5. 문제 해결

If you encounter issues with your Turbine Floor Nozzle, refer to the following common problems and solutions:

• 브러시 바가 회전하지 않음:
  • Check for obstructions (hair, debris) wrapped around the brush bar. Clean as per Maintenance instructions.
  • Ensure the nozzle is securely attached to the vacuum wand.
  • Verify your vacuum is powered on and operating correctly.
• 감소된 흡입:
  • Check for blockages in the nozzle's air intake or the vacuum's hose/wand.
  • Ensure the vacuum's dustbin is not full and filters are clean.
• Nozzle Lifting During Use:
  • This can occur on certain carpet types. Ensure the nozzle is fully engaged with the floor.
  • Check for any damage to the swivel joint or wheels that might affect smooth movement.

6. 사양

7. 보증 및 지원

For warranty information and customer support, please refer to the documentation provided with your original Dyson vacuum cleaner or visit the official Dyson website. Ensure you have your product model number (966043-15) and purchase details available when contacting support.