1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. 안전 정보
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- 설치 작업 중에는 항상 보안경과 같은 적절한 안전 장비를 착용하십시오.
- Use only the tools specified in the installation guide.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 외부 손잡이 세트 조립
- Interior Accent Lever Assembly
- 래치 메커니즘
- 스트라이크 플레이트
- 장착 나사 및 패스너
- 설치 템플릿(포함된 경우)
- 열쇠(해당하는 경우)
4. 설정 및 설치
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 문 준비
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 스트라이크 플레이트 설치
- Align the strike plate with the latch bolt on the door frame.
- Mark and chisel out the necessary area for a flush fit, if required.
- Secure the strike plate with the provided screws.
5. 사용 설명서
To operate your Schlage Addison Handleset:
- 잠그려면: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- 잠금 해제하려면: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- 열려면: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. 유지관리
Proper maintenance ensures the longevity and smooth operation of your handleset.
- 청소: 손잡이 부분을 부드러운 천으로 정기적으로 청소하십시오.amp 천으로 닦으세요. 연마성 세제, 용제 또는 강한 화학 물질은 마감재를 손상시킬 수 있으므로 피하세요.
- 매끄럽게 하기: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- 조임: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| Key does not turn smoothly | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| 문이 제대로 잠기지 않습니다 | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | 고정 나사가 헐거워졌습니다. | 보이는 모든 고정 나사를 조이십시오. |
8. 사양
- 모델 번호: 163604
- 상표: 슐라지
- 재료: 금속
- 색상: 새틴 니켈
- 마치다: 공단
- 스타일: 현대의
- 제품 크기: 16.51 x 20.32 x 52.07cm(6.5 x 8 x 20.5인치)
- 품목 무게: 2.04kg(4.5파운드)
- 핸들 유형: 지렛대
- 특징: Easy to Install, Patented adjustable bottom thru-bolt
- 제조업체: Allegion Canada Inc
- 원산지: 멕시코
9. 보증 및 지원
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage web자세한 내용은 해당 사이트를 참조하거나 제품에 포함된 보증서를 참조하세요.
추가 지원이 필요하면 다음을 방문하세요. SCHLAGE 매장.
