소개
This manual provides essential information for the installation, operation, and maintenance of your AMD Ryzen 9 3900X 12-core, 24-thread Unlocked Desktop Processor with Wraith Prism LED Cooler. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

Image: The retail packaging for the AMD Ryzen 9 3900X processor, featuring the Ryzen logo and "Built to Perform. Designed to Win." slogan.
안전 정보
Observe the following safety precautions to prevent damage to the processor or other components and to ensure personal safety:
- 구성 요소를 설치하거나 제거하기 전에 항상 컴퓨터의 전원을 분리하세요.
- Handle the processor by its edges to avoid touching the pins or contact pads.
- 부품을 다루기 전에 정전기 방지 손목 스트랩을 착용하거나 접지된 금속 물체를 자주 만져 정전기를 방전시키십시오.
- 컴퓨터 케이스의 과열을 방지하기 위해 적절한 통풍이 이루어지도록 하십시오.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- AMD 라이젠 9 3900X 프로세서
- AMD Wraith Prism LED Cooler (with pre-applied thermal paste)
- 설치 가이드
- AMD Ryzen Sticker

이미지: 클로즈업 view of the AMD Ryzen 9 3900X processor chip, showing the "RYZEN" branding on its integrated heat spreader.

Image: The AMD Wraith Prism LED Cooler, featuring a fan with customizable RGB lighting and copper heat pipes.
설정
설치 전 체크리스트
- 마더보드 호환성: Ensure your motherboard has an AM4 socket and supports the Ryzen 3000 series processors. Refer to your motherboard manufacturer's website for a CPU support list.
- BIOS 업데이트: It is highly recommended to update your motherboard's BIOS to the latest version before installing the processor. This ensures full compatibility and optimal performance.
- 열전도 페이스트: The Wraith Prism cooler comes with pre-applied thermal paste. If you are using a different cooler or reapplying, ensure you have high-quality thermal paste.
- 도구: You may need a Phillips head screwdriver.
프로세서 설치
- Carefully open the CPU socket retention arm on your motherboard.
- Align the gold triangle on the corner of the Ryzen processor with the triangle on the CPU socket.
- Gently lower the processor straight down into the socket. Do not force it. If it does not seat easily, re-check alignment.
- Once seated, close the CPU socket retention arm to secure the processor.
Cooler Installation (Wraith Prism LED Cooler)
- Ensure the motherboard's plastic retention brackets around the CPU socket are in place.
- Position the Wraith Prism cooler over the CPU, aligning the cooler's clips with the retention brackets.
- Attach one side of the cooler's clip to the corresponding retention bracket.
- Apply firm, even pressure to the other side of the cooler and attach the second clip to the remaining retention bracket. You may need to use the lever on the cooler to secure it.
- Connect the 4-pin CPU fan cable from the cooler to the "CPU_FAN" header on your motherboard.
- For LED control, connect the USB cable from the cooler to an available USB 2.0 header on your motherboard, and/or the RGB cable to a compatible RGB header on your motherboard.
운영
Once installed, the AMD Ryzen 9 3900X processor operates automatically within your system. Its performance is managed by the motherboard's BIOS/UEFI settings and the operating system.
- 운전자: Ensure you have the latest AMD chipset drivers installed for your motherboard. These can be downloaded from the AMD web해당 사이트 또는 마더보드 제조업체의 웹사이트 web대지.
- AMD Ryzen Master Software: For advanced users, AMD provides the Ryzen Master utility. This software allows for real-time monitoring of CPU temperatures, clock speeds, and voltage, as well as advanced overclocking capabilities. Download it from the official AMD web대지.
- 열 관리: The Wraith Prism cooler is designed to provide adequate cooling for the 3900X under typical workloads. Monitor CPU temperatures using system monitoring software to ensure they remain within safe operating limits, especially during heavy loads or overclocking.
유지
Regular maintenance helps ensure the longevity and optimal performance of your processor and cooler.
- 먼지 제거: Periodically clean dust from the Wraith Prism cooler's fan and heatsink fins using compressed air. Ensure the fan is held stationary while cleaning to prevent damage.
- 열전도 페이스트: The thermal paste applied to the cooler typically lasts for several years. If you notice consistently high temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning off old thermal paste from both the CPU and cooler base with isopropyl alcohol, and applying a new, thin layer of high-quality thermal paste.
문제 해결
If you encounter issues with your AMD Ryzen 9 3900X processor, consider the following common troubleshooting steps:
- 화면이 안 나오거나 시스템이 부팅되지 않습니다:
- Verify that the CPU is correctly seated in the socket and the retention arm is locked.
- Ensure the CPU power cable from the power supply is connected to the motherboard.
- Check that the CPU cooler is properly installed and its fan cable is connected to the CPU_FAN header.
- Confirm your motherboard BIOS is updated to support the Ryzen 3000 series.
- 고온:
- 쿨러가 단단히 고정되어 있고 CPU와 제대로 접촉하고 있는지 확인하십시오.
- Check if the cooler fan is spinning correctly.
- Verify that thermal paste is properly applied and not dried out.
- Improve case airflow by adding or repositioning case fans.
- 시스템 불안정/충돌:
- Ensure RAM is properly seated and compatible with your motherboard and CPU.
- 오버클럭을 한 경우, 안정성을 확인하기 위해 기본 설정으로 되돌리십시오.
- Run diagnostic tools to check for hardware faults.
추가적인 도움이 필요하시면 AMD 공식 지원 페이지를 방문하세요. website or consult your motherboard's manual.
명세서
| 특징 | 세부 사항 |
|---|---|
| 프로세서 모델 | AMD 라이젠 9 3900X |
| CPU 코어 | 12 |
| CPU 스레드 | 24 |
| 최대 부스트 클럭 속도 | 최대 4.6GHz |
| 총 L3 캐시 | 70메가바이트 |
| CPU 소켓 | AM4 |
| 지원되는 메모리 유형 | DDR4 3200MHz |
| 쿨러 포함 | RGB LED가 장착된 레이스 프리즘 |
| Product Dimensions (Processor) | 1.57 x 1.57 x 0.1 인치 |
| 품목 무게 | 1.6 온스 |
보증 및 지원
The AMD Ryzen 9 3900X processor comes with a 3년 한정 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.
For warranty claims, technical support, or additional resources, please visit the official AMD Support web대지:
https://www.amd.com/en/support
Please have your product model number (Ryzen 9 3900X) and proof of purchase ready when contacting support.





