KuWFi 4G LTE Mobile WiFi Hotspot Travel Router

소개

The KuWFi 4G LTE Mobile WiFi Hotspot Travel Router (Model KF-M6) provides portable wireless internet access. This device allows you to share a 4G LTE connection with multiple devices simultaneously, making it suitable for travel, home, or business use. It supports standard SIM cards and offers a reliable Wi-Fi hotspot.

패키지 내용

시작하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x KuWFi 4G LTE Travel Router (KF-M6)
• 1 x 충전식 배터리
• 1 x USB 충전 케이블
• 1 x 사용자 설명서

설정

Follow these steps to set up your KuWFi 4G LTE Mobile WiFi Hotspot:

1. 배터리 설치: Remove the back cover of the device. Insert the provided 2000mAh Lithium-Ion battery into the battery compartment, ensuring the contacts align correctly.
2. SIM 카드를 삽입하세요: With the battery removed, locate the standard SIM card slot. Carefully insert your activated standard SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly as indicated on the device.
3. 뒷면 커버 교체: 뒷면 덮개를 단단히 다시 부착하십시오.

4. 전원 켜기: Press and hold the Power Key (usually located on the front or side) for a few seconds until the LED indicators light up.
5. Wi-Fi에 연결: On your computer, smartphone, or tablet, search for available Wi-Fi networks. Select the network name (SSID) displayed on the device's label (often found under the battery or on the back cover). Enter the Wi-Fi password (WIFI KEY) also found on the label.
6. 입장 Web 인터페이스(선택 사항): 열기 web 브라우저를 열고 입력하세요 http://192.168.1.1 into the address bar. The default login username is typically "admin" and the password is "admin" (or as specified on the device label). From here, you can configure advanced settings such as APN, Wi-Fi name, and password.
7. APN 설정 구성: If the device does not connect to the internet automatically, you may need to manually configure the Access Point Name (APN) settings. Refer to your SIM card provider for the correct APN, dial number (e.g., *99#), and country settings.

장치 작동

Understanding the device's indicators and functions:

• LED 표시등: The device features 4 LED lights that indicate signal strength, Wi-Fi status, SMS notifications, and battery level. Refer to the device's quick start guide for specific light patterns and their meanings.

• WPS 기능: The device supports WPS (Wi-Fi Protected Setup) for easy connection to compatible devices without entering the password manually. Press the WPS key on the side of the router, then activate WPS on your client device within two minutes.

• Sharing Wi-Fi: The hotspot can support up to 10 users sharing the Wi-Fi connection simultaneously.
• 마이크로 SD 카드 슬롯: The device includes a Micro-SD card slot, supporting cards up to 32GB. Please note that as of current firmware, this slot may not support data sharing or function as a wireless drive.

유지

Proper care ensures the longevity and performance of your device:

• 충전 중: Charge the device using the provided Micro USB cable and a 5V DC, 1A charger. A full charge provides approximately 5-8 hours of working time.
• 배터리 관리 : To maximize battery life, avoid extreme temperatures and do not leave the device fully discharged for extended periods.
• 청소: 부드럽고 마른 천을 사용하여 기기를 닦으세요. 액체 세척제나 연마재는 사용하지 마세요.

문제 해결

문제가 발생하면 다음 해결 방법을 시도해 보세요.

• 인터넷에 연결되지 않음:
  • 유심 카드가 활성화되어 있고 데이터 요금제가 있는지 확인하세요.
  • Verify that the APN settings are correctly configured in the web 인터페이스.
  • Check the signal strength LED indicator. If signal is weak, move to an area with better reception.
  • 장치를 다시 시작합니다.
• Device Not Charging / Short Battery Life:
  • Ensure the USB cable and charger are functioning correctly and meet the 5V DC, 1A specification.
  • The device's battery life is rated for 5-8 hours. If significantly shorter, the battery may need replacement.
  • Note that the device may run warm during operation, which is normal.
• 접근할 수 없습니다 Web 인터페이스:
  • 기기가 핫스팟의 Wi-Fi 네트워크에 연결되어 있는지 확인하세요.
  • Confirm you are entering http://192.168.1.1 바르게.
  • 다른 것을 시도해보세요 web 브라우저.
• 장치 재설정: If issues persist, you can perform a factory reset. Locate the reset button (often a small pinhole) and press it with a paperclip for about 5-10 seconds while the device is powered on. This will restore all settings to their factory defaults, including Wi-Fi name and password.

명세서

보증 및 지원

KuWFi provides lifelong technical support for this product. If you have any questions or require assistance, please contact KuWFi customer service through their official channels or the retailer where the product was purchased.