Superfish Pro Koi 자동 연못 물고기 먹이통 사용 설명서

소개

Thank you for choosing the Superfish Pro Koi Automatic Pond Fish Feeder. This device is designed to automatically dispense food to your pond fish, ensuring they are fed regularly even when you are away. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.

Figure 1: Superfish Pro Koi Automatic Pond Fish Feeder in its retail packaging.

안전 정보

• Ensure the power supply is suitable for the device and is connected to a protected outdoor electrical outlet.
• Do not immerse the control unit or feeder in water. The feeder is designed for outdoor use but the control unit should be mounted in an easily accessible, protected location.
• 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
• Do not use with flake or stick foods, as this may cause clogging. Only use granules between 2-9 mm.
• 유지관리나 청소를 하기 전에는 반드시 전원을 분리하세요.

패키지 내용

패키지를 열 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.

• Superfish Pro Koi Automatic Pond Fish Feeder unit (hopper and dispensing mechanism)
• Control unit with display and buttons
• Mounting bracket (suitable for wall, post, or ground mounting)
• 10미터 전원 케이블
• Installation instructions (basic guide)

Figure 2: Contents of the Superfish Pro Koi Automatic Pond Fish Feeder package.

설정

1. 장착 위치를 선택하세요: Select a suitable location near your pond. The feeder can be mounted on a wall, a sturdy post, or directly on the ground using the provided mounting bracket. Ensure the location allows the dispensed food to fall directly into the pond.
   

   Figure 3: Feeder installed by a pond, demonstrating typical placement.

2. 마운팅 브래킷 설치: Securely attach the mounting bracket to your chosen surface (wall, post, or ground) using appropriate fasteners (not included, depending on surface type). The bracket is 47.5 cm long.
   

   Figure 4: Feeder unit attached to the mounting arm with the control unit connected.

3. Attach the Feeder Unit: Slide the feeder unit onto the mounting bracket until it is securely in place.
4. 제어 장치를 연결하십시오: The control unit is connected to the feeder via a cable. Mount the control unit in an easily accessible position, ensuring it is protected from direct heavy rain or extreme weather if possible, although it is designed for outdoor use.
   

   그림 5: 클로즈업 view of the control unit for programming.
5. 호퍼 채우기: Open the lid of the feeder and fill the hopper with suitable fish food granules. The hopper has a capacity of 7 liters and is designed for granules between 2 mm and 9 mm. Do not use flake or stick foods.
   

   그림 6: 측면 view of the feeder, illustrating the hopper capacity.

6. 전원에 연결: Plug the 10-meter power cable into a suitable outdoor electrical outlet.

작동 지침

The Superfish Pro Koi Automatic Pond Fish Feeder allows for flexible programming of feeding times and volumes.

Programming Feeding Schedules:

The feeder can be programmed to dispense between 1 and 24 meals per day. Refer to the control unit (Figure 5) for button layout.

1. 시간 설정: Use the "SET" button to enter programming mode. Use "UP" and "DOWN" buttons to adjust the current time. Press "SET" again to confirm.
2. 프로그램 식사 시간: In programming mode, you can set up to 24 individual feeding times. For each meal, use "UP" and "DOWN" to set the desired hour and minute. Press "SET" to move to the next setting.
3. Adjust Feeding Volume: For each programmed meal, you can adjust the volume of food dispensed. This is typically done by setting the duration of the dispensing mechanism's operation. Experiment to find the appropriate volume for your fish.
4. 설정 저장: Once all desired meals are programmed, exit programming mode (usually by holding "SET" or waiting for it to time out). The feeder will now operate according to your schedule.

수동 공급:

The control unit typically includes a "DOWN manual" button (refer to Figure 5). Pressing this button will dispense a single, manual portion of food outside of the programmed schedule.

Important Note on Food Type:

This feeder is specifically designed for fish food granules ranging from 2mm ~ 9mm. 그것은 not suitable for flake or stick foods, as these can clog the dispensing mechanism and lead to malfunction.

유지

• 청소: Regularly wipe the exterior of the feeder and control unit with a damp cloth to remove dust and debris. Ensure no water enters the control unit.
• 호퍼 청소: Periodically empty the hopper and clean it to prevent food residue buildup, which can attract pests or affect food quality. Ensure the hopper is completely dry before refilling.
• 분배 메커니즘: Check the dispensing mechanism regularly for any obstructions. If food is not dispensing correctly, disconnect power and carefully inspect the mechanism for blockages.

문제 해결

추천: Before leaving for an extended period, we strongly recommend a full week of testing the feeder to ensure it operates reliably according to your programmed schedule and dispenses the correct amount of food.

명세서

• 모델 번호: E6090191
• 치수(길이 x 너비 x 높이): 28.5 x 48.5 x 31.5cm
• 무게: 3.5kg
• 호퍼 용량 : 7리터
• Compatible Granule Size: 2~9mm
• 전원 케이블 길이: 10 미터
• Mounting Bracket Length: 47.5cm
• Feeding Frequency: 1 to 24 meals per day
• 재료: 플라스틱
• 색상: 검은색
• 권장 사용: Outdoor, for garden pond fish

보증

The Superfish Pro Koi Automatic Pond Fish Feeder comes with a 2년 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, neglect, improper installation, or use of incompatible food types (e.g., flakes or sticks).

지원하다

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the Superfish customer support directly. Refer to the Superfish official web최신 연락처 정보 및 추가 자료는 해당 사이트에서 확인하세요.

자세한 정보와 지원은 다음에서 확인하실 수 있습니다. www.superfish.com