NETGEAR Nighthawk WiFi 6 Router (RAX120) Instruction Manual

소개

The NETGEAR Nighthawk AX6000 12-stream Wi-Fi router is designed to handle demanding home network environments. It supports the latest Wi-Fi 6 (802.11ax) standard, offering increased data capacity and combined Wi-Fi speeds up to 6 Gbps. This router is optimized for smart home applications, 4K UHD streaming, and online gaming, providing enhanced performance and coverage for up to 3,500 sq. ft. and 30 devices.

The NETGEAR Nighthawk RAX120 WiFi 6 Router, designed for high-performance networking.

상자 안에 무엇이 들어있나요?

설치를 진행하기 전에 모든 항목이 있는지 확인하세요.

• Nighthawk AX12/12스트림 AX6000 WiFi 라우터(RAX120)
• 이더넷 케이블
• 빠른 시작 가이드
• 전원 어댑터

설치 지침

Follow these steps for initial setup of your NETGEAR Nighthawk RAX120 router:

1. 라우터 압축 풀기: Carefully remove the router and its components from the packaging. Lift the two wings of the router and gently press them into their upright and locked position.


The Nighthawk RAX120 router ready for setup in a home environment.

2. Connect to your Modem: Plug one end of the included Ethernet cable into the yellow 'Internet (WAN)' port on the back of the RAX120 router. Plug the other end into an available LAN port on your existing cable modem or Internet Service Provider (ISP) device.


Back panel of the RAX120, highlighting the Internet (WAN) port and other connections.

3. 전원 켜기: Connect the power adapter to the router's power port and then plug the adapter into a wall outlet. The router's LED lights will illuminate as it powers on.
4. Nighthawk 앱을 다운로드하세요: For easy setup and management, download the NETGEAR Nighthawk app on your mobile device. The quick start guide provides instructions and QR codes for downloading the app.


The Nighthawk app simplifies router setup and management.

5. 앱을 통한 전체 설정: Follow the step-by-step instructions within the Nighthawk app to configure your Wi-Fi network name (SSID), password, and other settings.

설정 비디오 가이드

Official video demonstrating the unboxing and initial setup of the NETGEAR Nighthawk AX12 router.

작동 지침

The Nighthawk RAX120 is designed for optimal performance and ease of use:

• 고속 Wi-Fi 6: Enjoy simultaneous streaming of movies, games, video calls, and file transfers at up to 6 Gbps Wi-Fi speed. The router's 12-stream design and AX6000 capabilities ensure efficient data handling for multiple devices.


The RAX120 supports numerous smart home devices with its 12 Wi-Fi streams.

• 확장된 적용 범위: Eight high-performance antennas amplify Wi-Fi signals, providing reliable coverage up to 3,500 sq. ft. This helps eliminate dead zones in larger homes.


Internal diagram illustrating the 8 high-performance antennas for broad coverage.

• 유선 연결: Utilize the 4 x 1G Ethernet ports and 1 x 1/2.5/5G Multi-Gig Ethernet port for high-speed wired connections to computers, game consoles, and streaming devices.
• USB 연결: Two USB 3.0 ports allow you to share a storage drive with connected devices or create a personal cloud storage for remote access.
• Nighthawk App Management: Use the Nighthawk app to easily manage Wi-Fi settings, test Internet speed, view 속도 기록을 확인하고 데이터 사용량을 모니터링하세요.


The Nighthawk App provides comprehensive control over your router and network.

• 넷기어 아머 보안: Protect your family's Wi-Fi with an automatic shield of security across all connected devices. NETGEAR Armor helps block viruses, malware, and phishing attempts.

NETGEAR Armor Video Guide

Official video explaining NETGEAR Armor Cybersecurity features.

Official video detailing how NETGEAR Armor protects against cyberthreats.

유지

To ensure optimal performance and longevity of your RAX120 router:

• 펌웨어 업데이트: Regularly check for and install firmware updates via the Nighthawk app. Updates often include performance improvements and security patches.
• 놓기: Place the router in a central location, away from obstructions and heat sources, to maximize Wi-Fi coverage and prevent overheating. Ensure adequate airflow around the device.
• 청소: Periodically clean the router's exterior with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
• 다시 시작: If you experience persistent performance issues, try restarting the router by unplugging it from the power outlet for 10 seconds and then plugging it back in.

문제 해결

If you encounter issues with your Nighthawk RAX120 router, consider the following:

• Frequent Reboots or Signal Drops:
  • 라우터가 과열되는 것을 방지하기 위해 통풍이 잘 되는 곳에 설치하십시오.
  • 모든 케이블 연결(이더넷, 전원)이 단단히 연결되어 있는지 확인하십시오.
  • Update the router's firmware to the latest version via the Nighthawk app.
  • If using a separate modem, ensure the modem is also functioning correctly and not causing interruptions.
• 느린 인터넷 속도:
  • Verify your Internet Service Provider (ISP) speed by connecting a device directly to your modem (bypassing the router).
  • Use the Nighthawk app to run Internet speed tests and monitor network activity.
  • 기기가 적절한 Wi-Fi 대역(빠른 속도를 위해서는 5GHz, 더 넓은 범위를 위해서는 2.4GHz)에 연결되어 있는지 확인하십시오.
  • Minimize interference by placing the router away from other electronic devices.
• Difficulty with Setup:
  • Ensure your modem is powered on and connected to the Internet before setting up the router.
  • Use the Nighthawk app for guided setup. If the app fails, try a wired setup using a computer and accessing the router's web 인터페이스(보통 routerlogin.net).
  • Perform a factory reset on the router if initial setup attempts are unsuccessful.

명세서

보증 정보

Specific warranty details for the NETGEAR Nighthawk RAX120 router are typically provided with the product documentation. For extended coverage, protection plans are available for purchase, including 3-Year and 4-Year options. Please refer to your product's packaging or the official NETGEAR web최신 보증 약관은 해당 사이트를 참조하십시오.

지원하다

For further assistance, technical support, or to access additional resources for your NETGEAR Nighthawk RAX120 router, please visit the official NETGEAR support website or utilize the NETGEAR Nighthawk app. The app provides direct access to support features, FAQs, and community forums.

NETGEAR 공식 지원: www.netgear.com/support