1. 제품 오버view
The LAUNCH U500 is a professional automotive diagnostic scan tool designed for enthusiasts, small garages, independent repair shops, and technicians. It provides comprehensive diagnostic functions for various vehicle systems.
이미지 1.1: 앞면 view of the LAUNCH U500 OBD2 Scanner, displaying its diagnostic menu on the screen.
2. 패키지 내용
패키지를 열 때 다음 품목이 모두 포함되어 있는지 확인하세요.
- 1 x LAUNCH Creader U500 Scanner
- 1 x OBDII Connector Cable
- 1 x USB 케이블
- 1 x 빠른 시작 가이드
3. 설정
3.1 차량에 연결하기
- 차량의 시동이 꺼져 있는지 확인하십시오.
- 차량의 16핀 데이터 링크 커넥터(DLC)를 찾으세요. 일반적으로 운전석 쪽 대시보드 아래에 있습니다.
- Firmly plug the OBDII Connector Cable into the vehicle's DLC.
- Connect the other end of the OBDII Connector Cable to the LAUNCH U500 scanner.
- Turn the vehicle's ignition to the ON position (engine off). The scanner should power on automatically.
4. 사용 설명서
4.1 사용자 인터페이스 탐색
The U500 features a 4.0" TFT 320*480 dpi screen and intuitive buttons for navigation.
Image 4.1: Diagram illustrating the LAUNCH U500's LCD screen and button functions, including DTC, ER, I/M, Help, OK, ESC, and selection buttons.
- LCD 화면: Displays test results and menu options.
- DTC Button (F1): Reads diagnostic trouble codes.
- ER Button (F2): Erases diagnostic trouble codes.
- I/M Button (F3): I/M 준비 상태에 빠르게 접근할 수 있도록 해줍니다.
- Help Button (F4): Accesses help information.
- 확인 버튼: Confirms the current operation or selection.
- ESC 버튼: 이전 화면으로 돌아갑니다.
- 선택 버튼(위/아래/좌/우): 메뉴와 옵션을 탐색합니다.
4.2 OBDII Full Functions
The U500 supports standard OBDII protocols (ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4) and offers the following functions:
Image 4.2: Visual representation of the various OBD-II modes supported by the LAUNCH U500, including Read Codes, Erase Codes, Check Engine, Evap System, I/M Readiness, Data Stream, Vehicle Information, On-Board Monitor, Freeze Frame, and O2 Sensor.
- Read Dynamic Data Streams: Displays real-time data from the vehicle's sensors.
- MIL Indication and Ready Status Query: Checks the Malfunction Indicator Lamp status and I/M readiness monitors.
- 정지 화면 데이터 읽기: 오류 코드가 발생했을 때 차량 상태의 스냅샷을 캡처합니다.
- Read Current DTCs: Retrieves active diagnostic trouble codes.
- DTC 지우기: Erases diagnostic trouble codes and turns off the Check Engine Light.
- O2 센서 테스트 : Monitors and tests the oxygen sensors.
- Specific Monitoring System: Accesses specific monitor test results.
- 온보드 모니터링: Tests components and systems not continuously monitored.
- Read Pending DTCs: Retrieves codes that have not yet triggered the MIL.
- On-board System or Component Control: Allows bidirectional control for certain tests (if supported by vehicle).
- 차량 정보 읽기: Displays VIN, Cal ID, CVN, etc.
- Read Permanent DTCs: Retrieves codes that remain after clearing until the system confirms the fault is fixed.
4.3 4계통 진단
Beyond standard OBDII, the U500 can diagnose four key vehicle systems:
Image 4.3: Illustration showing the four main systems the LAUNCH U500 can diagnose: Engine Check, ABS, SRS, and Transmission.
- 엔진 시스템: DTC를 읽고 지웁니다. views data streams for engine-related issues.
- ABS(잠금 방지 제동 시스템): DTC를 읽고 지웁니다. views data streams for ABS faults.
- SRS(보조 안전 시스템 - 에어백): DTC를 읽고 지웁니다. views data streams for airbag system issues.
- 전송 시스템: DTC를 읽고 지웁니다. views data streams for transmission problems.
4.4 특수 기능
The U500 supports two commonly required service features:
- 엔진오일 서비스 표시등 리셋: 오일 교환 후 오일 서비스 표시등을 재설정합니다.
- Electronic Brake Pad Reset (EPB Reset): 브레이크 패드 교체 후 전자식 주차 브레이크 시스템을 재설정합니다.
4.5 DTC Code Lookup
The device includes a DTC code lookup function to provide detailed information and definitions for retrieved diagnostic trouble codes (generic P0, P2, P3, U0, and manufacturer-specific P1, P3, U1 codes, as well as pending codes).
4.6 Data Stream Storage and Playback
The U500 allows for graphical display of up to four data streams simultaneously. It also supports data stream storage and playback, enabling review of diagnostic data at a later time.
4.7 차량 호환성
The LAUNCH U500 is compatible with over 40 brands of 1996 and newer cars, light trucks, minivans, SUVs, or hybrid manufactured vehicles that support OBD II protocols.
Image 4.4: Screen display of the LAUNCH U500 showing a list of supported car brands, indicating its wide vehicle coverage.
5. 유지관리
5.1 소프트웨어 업데이트
The LAUNCH U500 offers lifetime free software updates. To update the device:
- Connect the U500 scanner to a Windows PC terminal using the provided USB cable.
- 공식 출시 페이지를 방문하세요. web업데이트 도구와 최신 소프트웨어를 다운로드할 수 있는 사이트입니다.
- Follow the on-screen instructions of the update tool to complete the software upgrade.
Image 5.1: Diagram showing the LAUNCH U500 connected via USB to a laptop for software updates and printing diagnostic reports.
5.2 청소 및 보관
- 부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 스캐너는 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
- Keep the device and cables free from dust and moisture.
6. 문제 해결
If you encounter issues with your LAUNCH U500 scanner, consider the following:
- 장치 전원이 켜지지 않음: Ensure the OBDII cable is securely connected to both the vehicle's DLC and the scanner. Verify the vehicle's ignition is in the ON position.
- 통신 오류: Check that the vehicle supports OBDII protocols. Ensure all connections are secure. Try the scanner on a different compatible vehicle if possible to rule out vehicle-specific issues.
- 화면이 멈춤/응답하지 않음: Disconnect the scanner from the vehicle, wait a few seconds, and reconnect. If the issue persists, perform a software update.
- 잘못된 판독: Ensure the vehicle's VIN is correctly identified by the scanner. Verify that the software is up to date.
For persistent issues, refer to the official LAUNCH support resources or contact customer service.
7. 사양
| 특징 | 사양 |
|---|---|
| 화면 | 4.0인치 TFT 320*480dpi |
| 권tag및 범위 | 9-18V |
| 작동 온도 | 0°C ~ 50°C(32°F ~ 122°F) |
| 환경 온도 | -20°C ~ 70°C (-4°F ~ 158°F) |
| 치수(길이*너비*높이) | 195mm * 86mm * 32mm (7.6 * 3.4 * 1.2인치) |
| 품목 무게 | 880g |
| 겉감 소재 | ABS |
| 지원되는 프로토콜 | ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4 |
| 다국어 지원 | English, Japanese, French, Spanish, German, Russian, Italian, Portuguese, Polish, Turkish, Korean, Czech |
8. 보증 및 지원
The LAUNCH U500 comes with lifetime free software updates, ensuring your device remains current with the latest vehicle data and diagnostic capabilities.
For technical support, warranty claims, or further assistance, please contact LAUNCH customer service through their official website or the contact information provided in your product packaging. Please have your product model number (U500) and purchase details ready when contacting support.
