소개
The 8Bitdo Gbros. Wireless Adapter allows you to connect your original wired GameCube, NES Classic Edition, SNES Classic Edition, and Wii Classic controllers wirelessly to your Nintendo Switch or Windows PC. This adapter provides a seamless gaming experience with your favorite classic controllers.
무엇이 포함됩니까?
- GBros. Adapter
- 케이블 밴드
- USB 케이블
- 사용 설명서
설정
이미지: 상단 view of the 8Bitdo Gbros. Wireless Adapter, a blue oval-shaped device with green, red, gray, and yellow buttons.
1. 배터리 설치
The Gbros. Adapter requires two AA batteries for wireless operation. To install the batteries:
- Open the battery compartment cover on the back of the adapter.
- AA 배터리 2개를 올바른 극성(+/-)에 맞춰 넣으세요.
- 배터리 덮개를 단단히 닫으세요.
Alternatively, the adapter can be powered via the included USB cable when connected to a power source or a compatible device.
2. 컨트롤러 연결
Plug your wired GameCube, NES Classic Edition, SNES Classic Edition, or Wii Classic controller into the appropriate port on the Gbros. Adapter.
이미지: 측면 view of the 8Bitdo Gbros. Wireless Adapter showing the GameCube controller port.
이미지: 측면 view of the 8Bitdo Gbros. Wireless Adapter showing the Micro USB port for power or connection.
3. 닌텐도 스위치와의 페어링
- Nintendo Switch에서 홈 메뉴로 이동합니다.
- 선택하다 컨트롤러, 그 다음에 그립/오더 변경.
- Slide the switch on the Gbros. Adapter to the S position (for Switch mode).
- Press and hold the yellow button on the Gbros. Adapter for a few seconds until the blue LED starts blinking rapidly.
- The adapter will pair with your Nintendo Switch. Once paired, the blue LED will become solid.
Image: A GameCube controller connected to the 8Bitdo Gbros. adapter, which is wirelessly paired with a Nintendo Switch in handheld mode, displaying Super Smash Bros. Ultimate.
Image: An SNES Classic controller connected to the 8Bitdo Gbros. adapter, wirelessly paired with a Nintendo Switch in handheld mode, displaying a retro-style game.
Image: A Wii Classic controller connected to the 8Bitdo Gbros. adapter, wirelessly paired with a Nintendo Switch in handheld mode, displaying Mario Kart.
4. Windows PC에 연결
- Slide the switch on the Gbros. Adapter to the X position (for X-input mode, compatible with Windows).
- Connect the Gbros. Adapter to your Windows PC via the included USB cable or pair wirelessly via Bluetooth.
- Your PC should recognize the adapter as an X-input device.
Image: Two 8Bitdo Gbros. adapters, one connected to a Nintendo Switch and another near a tablet, demonstrating multi-device compatibility.
5. 펌웨어 업데이트
It is recommended to regularly check for and install firmware updates for your Gbros. Adapter to ensure optimal performance and compatibility with the latest system updates. Visit the official 8Bitdo support web최신 펌웨어 및 업데이트 지침은 사이트에서 확인하세요.
작동 지침
Once paired, your connected wired controller will function wirelessly as a standard Nintendo Switch Pro Controller or an X-input controller on Windows.
- 그만큼 빨간 버튼 on the Gbros. Adapter acts as the 집 button for Nintendo Switch.
- 그만큼 녹색 버튼 on the Gbros. Adapter acts as the Screenshot/Capture button for Nintendo Switch.
- 그만큼 S/X Switch allows you to toggle between Nintendo Switch mode (S) and Windows X-input mode (X).
For specific button mappings of your classic controller to the modern system, refer to the in-game controller settings or the 8Bitdo support documentation.
비디오: 오버view of the 8Bitdo Gbros. Wireless Adapter, demonstrating its features and compatibility with wired GameCube and Classic Edition controllers for Nintendo Switch.
유지
- Keep the adapter clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- 어댑터를 극한 온도나 직사광선에 노출시키지 마십시오.
- Remove batteries if the adapter will not be used for an extended period to prevent leakage.
문제 해결
- 어댑터가 페어링되지 않음: Ensure the adapter is in the correct mode (S for Switch, X for Windows) and that batteries are correctly installed or the USB cable is connected. Try re-pairing by holding the yellow button.
- 컨트롤러가 응답하지 않음: Check the connection between your wired controller and the Gbros. Adapter. Ensure the adapter is successfully paired with your console/PC.
- 렉 또는 연결 끊김 문제: Ensure the adapter's firmware is up to date. Reduce interference by moving closer to the console/PC or away from other wireless devices.
명세서
| 제품 치수 | 4.06 x 1.14 x 1.38 인치 |
| 품목 무게 | 1.6 온스 |
| 제조업체 | 8 비트도 |
| 품목 모델 번호 | 6922621500858 |
| 배터리 | 2개의 AA 배터리 필요(포함되지 않음) |
| 호환 장치 | Nintendo Switch, Windows PC (X-input) |
| 커넥터 유형 | Micro USB (for power/wired connection) |
보증 및 지원
보증 정보, 기술 지원 또는 기타 문의 사항은 8Bitdo 공식 웹사이트를 방문하십시오. web대지: www.8bitdo.com.
