HP 94A Black Toner Cartridge (CF294A) Instruction Manual

1. 제품 오버view

The HP 94A Black Toner Cartridge (model CF294A) is designed to provide high-quality, reliable printing for compatible HP LaserJet Pro printers. This original HP toner cartridge ensures consistent performance and helps prevent common printing issues, contributing to office productivity.

주요 특징:

• 일관된 품질: Engineered to work seamlessly with HP printers for dependable results.
• 신뢰할 수 있는 성능: Helps eliminate toner leaks and premature failures.
• 높은 페이지 출력량: Approximately 1,200 pages per cartridge.
• 지속 가능한 디자인: Made with 100% recycled content.

2. 호환 프린터

This HP 94A Black Toner Cartridge (CF294A) is compatible with the following HP LaserJet Pro printer models:

• HP LaserJet Pro M118dw
• HP LaserJet Pro MFP M148dw
HP 레이저젯 프로 MFP M148fdw
• HP 레이저젯 프로 MFP M149

3. 설치 지침

Follow these steps to install the HP 94A Black Toner Cartridge into your compatible HP LaserJet Pro printer:

1. 카트리지를 개봉하세요: Carefully remove the new toner cartridge from its packaging. Avoid touching the imaging drum or electrical contacts.
2. 카트리지를 흔들어주세요: Gently rock the cartridge from side to side several times to distribute the toner evenly.
3. Remove the Sealing Tape: Pull the orange tab or sealing tape straight out from the cartridge.
4. 프린터 접근 도어를 여세요: Open the toner cartridge access door on your HP LaserJet Pro printer.
5. 오래된 카트리지를 제거합니다(해당되는 경우): If replacing an old cartridge, grasp its handle and pull it straight out of the printer.
6. 새 카트리지를 삽입하세요: Align the new toner cartridge with the tracks inside the printer and push it firmly until it clicks into place.
7. 프린터 접근 도어를 닫으십시오: 토너 카트리지 접근 도어를 닫으십시오. 그러면 프린터가 일반적으로 보정 과정을 수행합니다.

영상: HP 94A Black Toner Cartridge removed from its packaging, ready for installation. This image shows the cartridge's design and handle for easy handling.

4. 토너 카트리지 작동

Once installed, the HP 94A toner cartridge operates automatically with your HP LaserJet Pro printer. It is designed to deliver sharp text and deep blacks for all your documents. For optimal print quality, ensure your printer's firmware is up to date.

영상: A magnifying glass highlighting the sharp text and graphics produced by HP Original Toner. This illustrates the precision and clarity of prints.

5. Maintenance and Toner Monitoring

The HP 94A toner cartridge is designed for minimal maintenance. Your HP printer will typically notify you when toner levels are low. Utilize the printer's software or control panel to monitor toner levels accurately. This helps ensure you get the full value from your cartridge and can plan for replacements without interruption.

영상: An HP toner cartridge showcasing its tamper-resistant chips and secure packaging. These features help protect your printer and data.

6. 문제 해결

Original HP Toner Cartridges are designed to minimize printing problems. If you encounter issues such as streaking, faded prints, or error messages, consider the following:

• 토너 잔량 확인: Verify the remaining toner level through your printer's display or software.
• 카트리지 재설치: Remove and reinsert the toner cartridge to ensure it is seated correctly.
• Clean Printer Components: Refer to your printer's manual for instructions on cleaning internal components if print quality issues persist.
• Use Original HP: Using non-HP toner cartridges can lead to print quality issues, printer damage, and may void your printer's warranty.

7. 사양

8. Reliability and Support

Original HP Toner Cartridges are engineered to provide dependable performance and consistent page yields. By using genuine HP products, you can avoid costly reprints and ensure the flawless operation expected from your HP printer. For further support or warranty information, please refer to the documentation included with your HP printer or visit the official HP support web대지.

영상: Hands holding recycled plastic, illustrating HP's commitment to sustainability by using recycled content in their toner cartridges.