소개
This manual provides essential information for the safe and proper assembly, use, and maintenance of your Graco Benton 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed with headboard.
Image: The Graco Benton 4-in-1 Convertible Crib and Changer in black, showcasing its crib and attached changing table configuration.
안전 정보
자녀의 안전은 무엇보다 중요합니다. 항상 다음 지침을 따르세요.
- 모든 지침을 읽으십시오. Ensure you understand all assembly and usage instructions before using the product.
- 정기 검사: 모든 나사, 볼트 및 고정 장치가 단단히 조여져 있는지 주기적으로 확인하십시오. 부품이 누락되었거나 손상되었거나 파손된 경우 아기 침대를 사용하지 마십시오.
- Mattress Safety: 가로 27 1/4인치(69cm), 세로 51 5/8인치(131cm) 이상, 두께 6인치(15cm) 이하의 매트리스만 사용하십시오. 매트리스는 틈 없이 꼭 맞아야 합니다.
- Child Height Limit: Discontinue use of the crib when your child begins to climb out or reaches 35 inches (89 cm) in height.
- Changing Table Safety: Always use the safety strap provided with the changing pad. Never leave a child unattended on the changing table.
- 질식 위험: Keep small parts, plastic bags, and packaging materials away from children.
- 인증: This product is GREENGUARD Gold Certified, screened for over 10,000 chemicals and VOCs, and JPMA Certified, meeting or exceeding all applicable safety standards.
Image: The Graco Benton Crib and Changer with a GREENGUARD Gold Certified badge, indicating low chemical emissions.
구성품 목록
Before assembly, ensure all components are present. Refer to the detailed parts list in your product packaging for specific hardware. Key components include:
- Crib side rails (front, back, left, right)
- Crib mattress support base
- Changing table frame
- Changing pad with safety strap
- Drawer components (3 drawers)
- Shelf components (2 open shelves)
- Hardware pack (screws, bolts, barrel nuts, Allen wrench)
Image: A diagram illustrating the key features of the crib and changer, including the adjustable mattress support, attached changing table, drawers, and shelves.
설정
Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. A general overview of the setup process is as follows:
- 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼내어 구성품 목록과 대조하여 확인하십시오.
- 아기 침대 프레임 조립하기: 제공된 하드웨어를 사용하여 측면 레일을 침대 머리판과 침대 발판에 부착합니다.
- 매트리스 지지대 설치: Secure the mattress support base at the desired height. There are three adjustable height options.
- 기저귀 교환대 조립하기: Construct the changing table frame, including the drawers and open shelves.
- Attach Changing Table: Securely attach the assembled changing table to the crib frame.
- Install Changing Pad: Place the water-resistant changing pad on the changing table and secure it with the safety strap.
For detailed visual instructions, please refer to the assembly diagrams in your product's dedicated assembly manual.
작동 지침
Crib Use
Place your child in the crib on their back. Ensure the mattress is firm and fits snugly. Adjust the mattress support base to the appropriate height for your child's developmental stage. The highest position is for infants, and lower positions are for older babies who can sit or stand.
Changing Table Use
Always use the changing pad with the safety strap. Place your child on the changing pad and secure the safety strap around them. Keep all necessary changing supplies within reach but away from the child. Never leave your child unattended on the changing table.
Image: A close-up of the attached changing table, showing the water-resistant changing pad and the integrated safety strap.
변환
The Graco Benton 4-in-1 Crib and Changer converts to a toddler bed, daybed, and full-size bed. Conversion kits and mattresses are sold separately.
- 유아용 침대: Remove the front crib rail and install the Graco Toddler Guardrail (sold separately).
- 데이베드: Remove the front crib rail. No guardrail is used for the daybed configuration.
- 풀사이즈 침대: Remove all crib rails and the changing table. Attach the headboard to a Graco Full-Size Conversion Kit (sold separately) and a standard full-size mattress.
Image: A visual representation of the four conversion stages: crib, toddler bed, daybed, and full-size bed with headboard.
유지
To maintain the quality and safety of your Graco Benton Crib and Changer:
- 청소: 광고로 표면 닦기amp 천을 사용하십시오. 마감재나 소재를 손상시킬 수 있는 연마성 세척제나 강한 화학 물질은 사용하지 마십시오.
- 저장: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage.
- 하드웨어: Periodically check all hardware for tightness. Loose hardware can lead to instability and safety hazards.
문제 해결
If you encounter issues with your Graco Benton Crib and Changer, consider the following:
- 흔들리는 구조: Ensure all bolts and screws are fully tightened. Re-check assembly steps to confirm correct part placement.
- 서랍이 부드럽게 미끄러지지 않음: Verify that the Euro drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
- 변환의 어려움: Refer to the specific conversion instructions provided with the optional conversion kits. Ensure all necessary parts are acquired.
- 잃어버린 부분들: If any parts are missing upon unboxing, contact customer support immediately. Do not attempt to substitute parts.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 04586-64B |
| 색상 | 검은색 |
| 제품 크기(L x W x H) | 73.2인치 x 29.8인치 x 41.7인치 |
| 품목 무게 | 98 파운드 |
| 재료 | Pine wood, engineered wood, and wood composites |
| Maximum Child Height (Crib Stage) | 35인치(89cm) |
| Maximum Weight (Toddler/Daybed) | 50 파운드 |
| 인증 | GREENGUARD Gold 인증, JPMA 인증 |
| 한국어: | 081877503177 |
Image: A diagram illustrating the overall dimensions of the Graco Benton Crib and Changer.
공식 제품 영상
Video: An official video from Storkcraft, the manufacturer of Graco products, highlighting the brand's commitment to supporting parents and providing safe, reliable baby products. This video showcases various Graco products and the design philosophy behind them.
보증 및 지원
The Graco Benton 4-in-1 Convertible Crib and Changer is backed by a 1년 한정 보증 제조상의 결함에 대해 보증합니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
For customer support, missing parts, or further assistance, please contact Storkcraft Customer Service:
- Web대지: 방문하세요 Storkcraft Brand Store 연락처 정보와 FAQ를 확인하세요.
- 핸드폰: Refer to the contact details provided in your product packaging or on the official Storkcraft web대지.
When contacting support, please have your model number (04586-64B) and date of purchase readily available.
