1. 서론
This manual provides detailed instructions for the GANA HS-PT-1080P 3-Port HDMI Switch. This device allows you to connect up to three HDMI source devices to a single HDMI display, eliminating the need to constantly swap cables. It supports Full HD 1080p resolution and 3D video, ensuring optimal and lossless signal transmission.
주요 특징은 다음과 같습니다.
- Supports Full HD 1080p (1920x1080P) and 3D video.
- 3 HDMI input ports and 1 HDMI output port.
- Plug and Play operation; no external power required.
- Gold-plated connectors for enhanced signal performance.
- HD Audio and HDCP compliant.
2. 제품 오버view
The GANA HS-PT-1080P HDMI Switch is designed for simplicity and efficiency. It features three HDMI input ports, one HDMI output cable, and a manual selection button with corresponding LED indicators to show the active input.
2.1개의 구성요소
- HDMI Input Ports (x3): Connect your source devices (e.g., game console, Blu-ray player, laptop).
- HDMI Output Cable (x1): Connects to your display device (e.g., TV, monitor, projector).
- 선택 버튼: Used to manually switch between the connected HDMI input sources.
- LED 표시등 (3개): Light up to indicate which HDMI input port is currently active.
3. 설정 지침
Follow these steps to set up your GANA HDMI Switch:
- 연결 출력: Plug the integrated HDMI output cable from the GANA HDMI Switch into an available HDMI input port on your display device (TV, monitor, or projector).
- 입력 장치 연결: Connect your HDMI source devices (e.g., TV Box, Xbox, PlayStation, PC, Blu-ray player) to the HDMI Input 1, Input 2, and Input 3 ports on the GANA HDMI Switch.
- 전원 켜기: Ensure all connected devices and your display are powered on. The HDMI switch is 'Plug and Play' and draws power directly from the connected HDMI sources, so no external power adapter is needed.
- 소스 선택: Use the 'Select' button on the HDMI switch to choose the desired input source. The corresponding LED indicator will illuminate to show the active input.
4. 사용 설명서
Operating the GANA HDMI Switch is straightforward:
- Automatic Input Detection: The switch may automatically detect and switch to a newly powered-on HDMI source.
- Manual Input Selection: To switch between active HDMI sources, press the 'Select' button located on the top of the switch. Each press will cycle through the available inputs (Input 1 → Input 2 → Input 3 → Input 1).
- LED 표시등: Observe the LED indicators (1, 2, 3) next to the 'Select' button. The illuminated LED corresponds to the currently active HDMI input.
5. 유지관리
GANA HDMI 스위치의 수명 연장 및 최적 성능 유지를 위해 다음 유지 관리 지침을 따르십시오.
- 청소: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid cleaners or abrasive materials, as they may damage the device.
- 저장: Store the switch in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- 손질: Handle the device and its connectors with care. Avoid bending or pulling the HDMI cables excessively, which can damage the internal wiring or ports.
- 환경: Do not expose the switch to water, moisture, or high humidity.
6. 문제 해결
If you encounter issues with your GANA HDMI Switch, refer to the following troubleshooting tips:
- 화면/신호 없음:
- HDMI 케이블이 소스 기기, 스위치 및 디스플레이에 모두 제대로 연결되어 있는지 확인하십시오.
- Verify that the correct input source is selected on the HDMI switch (check the LED indicator).
- 디스플레이의 HDMI 입력 채널이 올바르게 설정되어 있는지 확인하십시오.
- 케이블이나 소스 기기 문제인지 확인하려면 소스 기기를 디스플레이에 직접 연결해 보세요.
- 연결된 모든 장치(소스, 스위치, 디스플레이)를 재시작하십시오.
- Flickering Picture or Poor Quality:
- 느슨한 케이블 연결을 확인하십시오.
- Ensure you are using high-quality HDMI cables.
- Reduce the cable length if possible, especially for longer runs.
- Some devices may require a specific boot order. Try powering on the display first, then the HDMI switch, then the source device.
- 오디오 없음:
- Verify that the audio settings on your source device are correctly configured for HDMI output.
- 디스플레이 장치의 오디오 설정을 확인하세요.
- HDMI 케이블이 오디오 전송을 지원하는지 확인하십시오.
- 스위치가 응답하지 않음:
- Ensure at least one HDMI source device is powered on and connected to provide power to the switch.
- Disconnect and reconnect all HDMI cables to reset the connections.
7. 사양
| 특징 | 설명 |
|---|---|
| 모델 번호 | HS-PT-1080P |
| 상표 | 가나 |
| 입력 포트 | 3개의 HDMI |
| 출력 포트 | 1개의 HDMI |
| 지원되는 해상도 | Up to 1080p (1920x1080P), 3D |
| 커넥터 유형 | HDMI |
| 전원 공급 장치 | No external power required (powered by HDMI source) |
| 제품 치수 | 8.2 x 5.33 x 1.75cm |
| 제품 무게 | 81g |
| 한국어: | 601285150765 |
| 호환 장치 | Most devices with an HDMI port |
8. 보증 및 지원
GANA products are designed for reliability and performance. For specific warranty information regarding your GANA HS-PT-1080P HDMI Switch, please refer to the warranty card included with your purchase or visit the official GANA web대지.
If you require technical assistance or have questions not covered in this manual, please contact GANA customer support through their official channels. When contacting support, please have your product model number (HS-PT-1080P) and purchase details readily available.
