소개
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your 3PLUS HCB050401 18-Gauge Brad Nailer and Quiet Air Compressor Combo Kit. Please read this manual thoroughly before use and retain it for future reference.
중요한 안전 정보
경고: 이러한 안전 지침을 따르지 않을 경우 심각한 부상이나 재산 피해가 발생할 수 있습니다.
- Always wear safety glasses and hearing protection when operating the nailer and compressor.
- Never point the nailer at yourself or others.
- 조정, 막힘 제거 또는 유지 보수를 수행하기 전에 공기 공급을 차단하십시오.
- 작업 공간이 깨끗하고 조명이 밝으며 장애물이 없는지 확인하십시오.
- Do not operate the compressor or nailer in damp 또는 습한 환경.
- 어린이와 주변인이 작업 영역에 접근하지 못하도록 하십시오.
- Regularly inspect the air hose for damage and ensure all connections are secure.
- Do not exceed the maximum operating pressure of the tools.
- Compressor Safety: The compressor tank fills quickly and automatically stops when topped off. However, always monitor the pressure gauge and manually shut off the compressor if it does not stop automatically to prevent over-pressurization.
제품 끝view
The 3PLUS HCB050401 combo kit includes an 18-gauge brad nailer (HF50SP) and a 1-gallon quiet air compressor (HC0504G), designed for various finish and trim applications.
키트 구성 요소
- 18-Gauge Brad Nailer (HF50SP)
- 1-Gallon Air Compressor (HC0504G)
- Air Hose with Fittings
- 안전 고글
- 렌치
- 매뉴얼
그림 1: The complete 3PLUS HCB050401 18-Gauge Brad Nailer and Quiet Air Compressor Combo Kit, including the brad nailer, air compressor, air hose, safety goggles, and wrenches.
Air Compressor (HC0504G) Features
- Direct-drive, oil-free pump for clean operation and minimal maintenance.
- Roll bar design protects vital components.
- Low noise level of 65 dBA.
- 1-gallon tank capacity.
- 125 PSI maximum pressure.
그림 2: 클로즈업 view of the 3PLUS HC0504G Air Compressor, highlighting its gauges and controls. The compressor is red with black accents and features a protective roll bar handle.
Brad Nailer (HF50SP) Features
- Drives 18-gauge brad nails from 3/4'' to 2'' (20-50mm).
- Adjustable depth-of-drive for precise nail placement.
- 360° air exhaust directs air away from the user.
- Quick-clear jam release for easy maintenance.
- No-mar tip protects work surfaces.
그림 3: 옆 view of the 3PLUS HF50SP 18-Gauge Brad Nailer, showing its magazine and ergonomic grip. The nailer is black with a red top housing.
설치 지침
1. 개봉 및 검사
Carefully remove all components from the packaging. Inspect for any shipping damage. Ensure all listed components are present.
2. 에어 호스 연결하기
- Connect one end of the air hose to the compressor's air outlet. Ensure a secure, airtight connection.
- Connect the other end of the air hose to the air inlet fitting on the brad nailer.
- Verify all connections are tight to prevent air leaks.
그림 4: The air hose connected to the brad nailer, ready for operation. The quick-connect fitting ensures a secure attachment.
3. Loading the Brad Nailer
- Ensure the air supply is disconnected from the nailer.
- 잡지 팔로어가 열린 위치에 고정될 때까지 뒤로 당깁니다.
- Insert a strip of 18-gauge brad nails (3/4" to 2" in length) into the magazine with the points facing down.
- 매거진 팔로워를 풀어주어 못을 앞으로 밀어내도록 합니다.
작동 지침
1. Air Compressor Operation
- Place the compressor on a stable, level surface.
- 압축기를 120V 콘센트에 꽂으세요.
- Turn the power switch to the "ON" position. The compressor will begin to fill the tank.
- Monitor the tank pressure gauge. The compressor is designed to automatically shut off when the maximum pressure (125 PSI) is reached. If it does not, immediately turn the power switch to "OFF".
- Adjust the output pressure using the regulator knob to the recommended operating pressure for your brad nailer (60-120 PSI).
그림 5: Close-up of the air compressor's control panel, showing the pressure gauges and regulator knob. This image helps identify the components for pressure adjustment.
2. Brad Nailer Operation
- Ensure the air hose is securely connected and the compressor is set to the desired operating pressure.
- 드라이브 깊이 조정: Use the depth adjustment wheel on the nailer to control how deep the nail is driven into the material. Test on a scrap piece of material first.
- Place the nailer's nose against the workpiece where you want to drive a nail.
- Press down firmly on the nailer to engage the safety contact trip.
- 방아쇠를 당겨 못을 발사하세요.
- Release the trigger and lift the nailer from the workpiece.
그림 6: Close-up of the brad nailer's depth adjustment wheel, illustrating how to control nail depth. The image shows examples of nails driven flush and recessed.
그림 7: The quick-clear jam release mechanism on the brad nailer, designed for easy removal of jammed nails.
그림 8: The 360° adjustable air exhaust on the brad nailer, allowing users to direct exhaust air away from their face and work area.
응용 프로그램
This combo kit is suitable for various finish and trim applications, including:
- 캐비닛 조립
- 가구 제작
- Interior and exterior trimming
- Door and window casings
- 공예 프로젝트
그림 9: The brad nailer being used for installing trim, demonstrating its application in finish carpentry.
유지
Regular maintenance ensures the longevity and optimal performance of your 3PLUS combo kit.
1. Air Compressor Maintenance
- 배수 공기 탱크: After each use, or daily if used frequently, drain moisture from the air tank. Turn off the compressor, disconnect power, and open the drain valve at the bottom of the tank until all air and moisture are expelled. Close the drain valve.
- 오일 프리 펌프: The HC0504G compressor features an oil-free pump, eliminating the need for oil changes or lubrication.
- 깨끗한 공기 필터: Periodically inspect and clean the air filter to ensure proper airflow.
그림 10: Close-up of the air compressor's drain valve, located at the bottom of the tank. This valve is used to release condensed moisture.
2. Brad Nailer Maintenance
- 매끄럽게 하기: 사용하기 전에 공기 흡입구에 공압 공구 오일을 몇 방울 떨어뜨리십시오.
- 청소: Keep the nailer clean and free of debris. Use compressed air to clear dust from the magazine and firing mechanism.
- 검사: Regularly check for loose screws, worn parts, or damage. Replace any damaged components immediately.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Nailer does not fire or fires weakly. | Low air pressure; no nails in magazine; jammed nails; worn O-rings. | Increase compressor pressure; load nails; clear jam using quick-release; inspect and replace O-rings if necessary. |
| 손톱이 자주 끼입니다. | Incorrect nail size; damaged nails; low air pressure; dirty magazine. | Use correct 18-gauge nails (3/4" to 2"); inspect nails for damage; increase air pressure; clean magazine. |
| Compressor runs continuously or does not build pressure. | Air leak; faulty pressure switch; drain valve open. | Check all connections for leaks; ensure drain valve is closed; contact customer support if pressure switch is suspected. |
| Compressor does not shut off automatically at max pressure. | 압력 스위치에 결함이 있습니다. | Immediately turn off the compressor manually. This is a safety concern. Contact customer support for repair or replacement of the pressure switch. |
명세서
Air Compressor (HC0504G)
- 모터: 0.5마력
- 권tage: 120 볼트
- 항공 배달: 0.7 PSI에서 90 CFM
- 탱크 용량: 1갤런(4L)
- 최대 압력: 125 PSI(8.6바)
- 펌프 유형 : Single pump, oil-free
- 소음 수준: 65데시벨
- 품목 무게: 23파운드
- 호스 길이: 25 Feet (included)
- 제품 크기: 16.42"L x 16.42"W x 14.02"H (approximate, based on overall kit dimensions)
그림 11: Diagram illustrating the key specifications and dimensions of the 3PLUS HC0504G Air Compressor.
Brad Nailer (HF50SP)
- 계량기: 18 가
- 하중 용량: 100개의 못
- 작동 공기압 : 60-120 PSI
- 손톱 길이: 3/4" to 2" (20-50mm) brad nails
- 특징: Adjustable depth-of-drive, 360° air exhaust, quick-clear jam release, no-mar tip.
- 제품 크기: 9.8"L x 2.7"W x 9.8"H (approximate, based on image)
그림 12: Diagram illustrating the key specifications and dimensions of the 3PLUS HF50SP Brad Nailer.
보증 및 지원
For warranty information, technical support, or to inquire about replacement parts, please contact 3PLUS customer service. Refer to the contact information provided with your product packaging or visit the official 3PLUS web대지.
온라인 리소스: 추가 지원 및 제품 정보는 다음을 방문하세요. 3PLUS Store on Amazon.
