Juno IC22 W G

Juno 6 Inch Incandescent Recessed Light Housing (Model IC22 W G)

상표: Juno | 모델: IC22 W G

소개

This instruction manual provides detailed guidance for the installation, operation, and maintenance of the Juno 6-Inch Incandescent Recessed Light Housing, Model IC22 W G. This housing is specifically designed for new construction applications and is engineered for safety, performance, and energy efficiency.

주요 특징은 다음과 같습니다.

  • IC-Rated: 단열재와 직접 접촉하는 데 적합합니다.
  • UL 등재: d에 대해 인증됨amp locations, ensuring safety and reliability.
  • Air-Loc Gasket: Integrated gasket reduces air leakage, contributing to energy efficiency.
  • 간편한 설치: Features push-in electrical connectors and Real Nail 3 bar hangers for secure mounting.
  • 변하기 쉬운: Accommodates various incandescent lamp types and trim combinations.

안전 정보

Always disconnect power at the circuit breaker before installing or servicing the fixture. Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure the housing is properly grounded.

This housing is IC 등급, meaning it is safe for direct contact with insulation. It is also d에 대한 UL 등재amp 위치, making it suitable for bathrooms, kitchens, and other areas where moisture may be present.

설정 및 설치

The Juno IC22 W G housing is designed for new construction projects and fits ceilings up to 1 inch thick. Follow these general steps for installation:

  1. 천장 준비: Ensure the ceiling joists are properly spaced to accommodate the housing's bar hangers. The housing requires a 6-7/8 inch ceiling cutout.
  2. 하우징 장착: Utilize the Real Nail 3 bar hangers with telescoping arms to securely mount the galvanized steel frame between ceiling joists. The hangers are designed for quick and stable positioning.
  3. 배선: The pre-wired junction box includes (5) 1/2 inch and (1) 3/4 inch knockouts. Use the provided push-in electrical connectors to simplify wiring connections. Ensure all connections are secure and comply with electrical codes.
  4. Install Socket and Trim: The housing features an adjustable socket plate and a detachable medium base porcelain socket with snap-in springs. This allows for accommodation of various lamp and trim combinations. Install the desired incandescent bulb and compatible Juno 6-inch baffle trim (sold separately).
Juno 6 Inch Incandescent Recessed Light Housing
Figure 1: Juno 6 Inch Incandescent Recessed Light Housing (Model IC22 W G). This image shows the complete housing unit with its galvanized steel frame and electrical box.
Juno IC22 Housing Dimensions
Figure 2: Technical drawing illustrating the dimensions of the Juno IC22 W G housing. The drawing indicates a length of 9.5 inches and a height of 7.125 inches for the main housing body, with bar hangers extending to accommodate various joist spacings.
Juno IC22 Housing Features
Figure 3: Visual representation highlighting key features of the IC22 Housing, including its trusted brand status, easy installation, and energy-efficient Air-Loc sealed double wall construction. The image also notes its IC-rated capability for direct insulation contact.

작동 지침

The Juno IC22 W G is a housing unit designed to hold an incandescent light bulb and a compatible trim. Its operation is dependent on the installed bulb and the electrical circuit it is connected to.

  • 전구 호환성: This housing accepts incandescent lamp types including A19, BR30, BR40, R20, PAR16, PAR20, and PAR30. Ensure the wattage of the chosen bulb does not exceed the maximum rating of the fixture (90 watts).
  • 전원 제어 : The light will operate via the wall switch or control method connected to its electrical circuit.

유지

Regular maintenance ensures optimal performance and longevity of your recessed light housing.

  • 청소: Periodically clean the trim and bulb with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • 전구 교체: Always disconnect power before replacing a bulb. Allow the old bulb to cool completely before removal. Insert the new bulb securely into the medium base porcelain socket, ensuring it is of a compatible type and wattage.
  • 점검: Annually inspect the housing and wiring for any signs of wear, damage, or loose connections. If any issues are found, consult a qualified electrician.

문제 해결

If you encounter issues with your Juno recessed light housing, consider the following common troubleshooting steps:

  • 조명이 켜지지 않음:
    • 회로 차단기를 확인하여 조명 기구에 전원이 공급되는지 확인하십시오.
    • Verify the light bulb is correctly installed and not burnt out. Try replacing it with a known working bulb.
    • 벽 스위치가 '켜짐' 위치에 있는지 확인하십시오.
  • 깜박이는 빛:
    • Confirm the bulb is fully screwed into the socket.
    • Check for loose wiring connections in the junction box (ensure power is off before inspecting).
    • 전구 와트를 확보하십시오tage is compatible with the fixture and any dimmer switches used.
  • 과열:
    • 올바른 전구 와트를 확인하세요tage is used and does not exceed the fixture's maximum rating.
    • Verify that the IC-rated housing is not compromised and insulation is not directly touching non-IC rated parts (if applicable, though this model is IC-rated).

For persistent electrical issues or if you are unsure about any troubleshooting steps, consult a qualified electrician.

명세서

기인하다세부 사항
모델 번호IC22 W G
크기6인치
설치 유형New Construction, Recessed
재료Galvanized Steel Frame, Copper (internal components)
치수(제품)14"L x 14"W x 8"H (overall with hangers)
천장 컷아웃6-7/8 인치
천장 두께최대 1인치
광원 유형백열전구
전구베이스E26 미디엄
최대 와트tage90 와트
권tage120 볼트
인증UL Listed, CSA, IC-Rated, Damp 위치
무게2.5파운드
포함된 구성 요소주택
Video: Contractor Select Overview 2024년. 이 영상은 전반적인 개요를 제공합니다.view of the Contractor Select product line by Acuity Brands, which includes Juno lighting products. It highlights the range of products and their applications for various projects.

보증 및 지원

The Juno 6 Inch Incandescent Recessed Light Housing (Model IC22 W G) comes with a 5년 한정 보증. Please note that using trim kits from other brands may void the warranty.

For technical assistance, warranty claims, or further information, please contact Juno customer support. Refer to the official Juno web최신 연락처 정보는 웹사이트 또는 제품 포장에서 확인하실 수 있습니다.

관련 문서 - IC22 W G

사전view Juno 5인치 범용 IC 하우징(IC20 시리즈) - 백열등 Lamps - 제품 사양 및 설치
단종된 Juno 5인치 범용 IC 하우징(IC20 시리즈)의 상세 사양, 설치 가이드, 제품 코드 및 트림 옵션입니다.amps. 에너지 효율을 위한 Air-Loc 기술이 적용되었습니다.
사전view JUNO 6" Economy Universal IC Housing Incandescent Lamps IC22 Series: Specifications and Installation
Comprehensive guide to the JUNO 6" Economy Universal IC Housing (IC22 Series) for incandescent lamps. Details product features, installation procedures using Real Nail bar hangers, junction box specifications, dimensions, warranty information, and a complete list of compatible trims.
사전view Juno IC20R 5" Universal IC Remodel Housing - Incandescent Lamps - Technical Specification
Detailed technical specifications for the Juno IC20R 5" Universal IC Remodel Housing, designed for incandescent lamps. Features include IC Air-Loc® for energy efficiency, remodel installation, and compatibility with various trims.
사전view JUNO 4인치 소형 범용 IC 신규 구축 하우징 IC1 시리즈
제품 사양, 설치 가이드 및 마감재/리모델링amp JUNO 4인치 소형 범용 IC 신규 건설 하우징(IC1 시리즈)과 호환됩니다. 에너지 효율을 위한 Air-Loc 기술과 간편한 설치를 위한 다양한 바 행거 시스템을 갖추고 있습니다.
사전view "Juno 5" Universal IC Housing for Incandescent Lamps (IC20 Series) - Product Specifications & Installation
Detailed specifications, installation guide, and product codes for the Juno 5-inch Universal IC Housing (IC20 Series) designed for incandescent lamps. Features Air-Loc® sealing, Real Nail® bar hangers, and compatibility with various trims. Ideal for new construction.
사전view Juno TC6 8인치 정사각형 백열등 매입형 조명기구 - 설치 및 사양
Juno TC6 8인치 정사각형 백열등 매입형 조명기구의 상세 사양, 설치 가이드 및 제품 코드입니다. 주요 특징으로는 Real Nail 3 바 행거, 열 보호 기능, 100W A19 램프와의 호환성 등이 있습니다.amps.