1. 제품 오버view
The Generac RTSW200G3 is a 200 Amp Service Rated Three-Phase Automatic Transfer Switch designed for use with Generac generators equipped with Evolution or Nexus Controllers. This unit facilitates the automatic transfer of electrical load between utility power and a standby generator, ensuring continuous power supply during outag에스.
주요 특징은 다음과 같습니다.
- Durable and Weather-Resistant Enclosure: Features an aluminum NEMA/UL Type 3R enclosure with electrostatically applied powder coating for long-lasting performance in various weather conditions.
- Robust and UL Recognized Contactors: Heavy-duty Generac contactors are recognized by UL for reliability and designed for extended service life.
- Efficient and Intelligent Control: The integrated controller at the generator manages all timing, sensing, exercising functions, and transfer commands for seamless operation.
- Single-Person Installation Design: Engineered to streamline the setup process.
Image showing the Generac RTSW200G3 200 Amp Service Rated 120/208 3Ø Power Transfer Switch, highlighting its robust aluminum enclosure.
2. 안전 정보
경고: Installation and service of this transfer switch must be performed by a qualified, licensed electrician in accordance with all applicable electrical codes and standards. Failure to do so can result in serious injury, death, or property damage.
- Always disconnect all power sources before servicing the transfer switch.
- Ensure proper grounding and bonding as per local electrical codes.
- Do not operate the transfer switch if any part is damaged or appears to be malfunctioning.
- 이 제품에는 캘리포니아주에서 암과 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다(제안 65호 경고).
3. 설정 및 설치
The Generac RTSW200G3 is designed for a single-person installation, however, Generac strongly recommends that installation be performed by a certified and licensed electrician. This ensures compliance with all electrical codes and safety standards.
- The transfer switch is listed to UL 1008 for Optical Standby applications.
- Service Disconnects are listed to UL 489.
- The enclosure is provided with an integrated deadfront for safe operation of the Service Disconnect.
- Refer to the detailed wiring diagrams and installation instructions provided with the physical product for specific connection procedures.
4. 사용 설명서
The Generac RTSW200G3 operates automatically in conjunction with your Generac generator's Evolution or Nexus Controller. The transfer switch monitors the utility power supply.
- Utility Power Loss: Upon detection of a utility power outage, the generator controller will initiate the generator startup sequence. Once the generator reaches proper operating parameters, the transfer switch will automatically transfer the electrical load from the utility to the generator.
- Utility Power Restoration: When utility power is restored and stable, the transfer switch will automatically transfer the electrical load back to the utility. The generator will then enter a cool-down period before shutting down.
- 수동 조작: Consult your generator's controller manual for any manual override or testing procedures.
5. 유지관리
Regular maintenance ensures the longevity and reliable operation of your transfer switch. Always disconnect all power sources before performing any maintenance.
- 연례 검사: Have a qualified electrician inspect the transfer switch annually. This includes checking for loose connections, signs of corrosion, and proper operation of moving parts.
- 깨끗하게 유지하십시오: Ensure the enclosure is free from dust, debris, and moisture.
- 정기적으로 테스트: Follow the recommended testing schedule for your generator and transfer switch system to ensure it functions correctly during an actual power outage.
6. 문제 해결
If you experience issues with your Generac RTSW200G3 transfer switch, consider the following basic troubleshooting steps. For complex issues, contact a qualified electrician or Generac customer support.
- 양도 불가: Verify that the generator is running and producing power. Check the generator controller for any fault codes. Ensure all circuit breakers are in the ON position.
- 간헐적 작동: Check all wiring connections for tightness and signs of damage. Ensure the utility power supply is stable.
- 특이한 소음: Immediately shut down the system and contact a qualified technician.
7. 사양
| 사양 | 세부 사항 |
|---|---|
| 상표 | 제네락 |
| 모델명 | RTSW200G3 |
| 현재 평가 | 200 Amps |
| 권tage | 120/208V (3Ø) |
| 왓tage(최대) | 41600 와트 |
| 시작 와트tage(최대) | 104000 와트 |
| 재료 | 알류미늄 |
| 인클로저 유형 | NEMA/UL Type 3R |
| 제품 치수 | 27.2 x 26 x 26.5 인치 |
| 품목 무게 | 30 파운드 |
| ASIN | B01LXG7NT4 |
| 한국어: | 696471620467 |
8. 보증 및 지원
The Generac RTSW200G3 comes with a 5년 제한 보증, providing confidence in your power transfer solution.
For technical assistance, warranty claims, or to locate authorized service providers, please contact Generac customer support or visit the official Generac web대지. 다음을 방문할 수도 있습니다. 아마존의 제너락 스토어 더 많은 제품 정보를 보려면.
