소개
The Orange Amp Detonator is a buffered ABY switcher pedal designed for electric guitarists who wish to use two amplifiers simultaneously or switch between them without signal degradation or ground hum issues. This active pedal provides transformer-isolated outputs and buffered signals to maintain tonal integrity across complex setups. It addresses common problems associated with passive ABY boxes, offering a robust and transparent solution for advanced amplifier routing.
특징
- Active A/B/Y Switch for Electric Guitar
- Transformer-isolated Output to eliminate ground hum
- Buffered Outputs for consistent signal strength
- Polarity Switch to correct phase issues between amp리퍼
제어 및 연결
그만큼 Amp Detonator features intuitive controls and robust connections for seamless integration into your guitar rig.
이미지 1: 앞쪽 view of the Orange Amp Detonator pedal, showing the 'A - B' and 'BOTH' footswitches, the 'PHASE' button, and the 'BUFFERED ABY' indicator.
- 입력 잭 : Connect your guitar or the output of your last pedal in the signal chain here.
- Output A Jack: Connect to your first amplifier의 입력.
- Output B Jack: Connect to your second amplifier's input. This output is transformer-isolated.
- 'A - B' Footswitch: Toggles between Output A and Output B.
- 'BOTH' Footswitch: Engages both Output A and Output B simultaneously.
- 'PHASE' Button: Corrects phase discrepancies between amplifiers when using both outputs.
- BUFFERED ABY Indicator: LED light indicating the active output mode (A, B, or BOTH).
- DC 9V 입력: Power input for the pedal.
이미지 2: 각진 view of the pedal, highlighting the input and output jacks on the sides.
이미지 3: 뒤쪽 view of the pedal, displaying the power input and product serial number information.
설정
Follow these steps to set up your Orange Amp Detonator pedal:
- 전원 연결: Connect a 9V DC power supply (center negative) to the DC 9V input jack on the pedal. The pedal can also run on 9V or 12V power for increased headroom.
- 기타 입력: Connect your guitar (or the output of your last effect pedal) to the INPUT jack on the Amp Detonator.
- Amp앰프 연결:
- Connect the OUTPUT A jack to the input of your first amp리퍼.
- Connect the OUTPUT B jack to the input of your second amp리퍼.
- 초기 확인: Ensure all connections are secure and power is supplied to the pedal and amp정수기.
동영상 1 : 공식 제품 영상 쇼asing the Orange Amp Detonator Buffered ABY Switcher Pedal's features and operation.
작동 지침
그만큼 Amp Detonator offers flexible routing options:
- 선택 Amplifier A or B: Press the 'A - B' footswitch to toggle between sending your signal to Amplifier A or Amplifier B. The BUFFERED ABY indicator will change color to show which output is active (e.g., green for A, red for B).
- Using Both Amp리퍼: Press the 'BOTH' footswitch to send your signal to both Amp증폭기 A 및 Amplifier B simultaneously. The BUFFERED ABY indicator will typically show a distinct color (e.g., blue) to indicate this mode.
- 위상 보정: If you experience phase cancellation or a thin sound when using both amplifiers, press the 'PHASE' button. This will invert the phase of one of the outputs (usually Output B) to bring the amplifiers back into phase, resulting in a fuller sound.
- Switching Logic: The pedal remembers the last selected single output (A or B) when you disengage the 'BOTH' mode. For example, if you were on 'A', then engaged 'BOTH', and then disengaged 'BOTH', the pedal will return to 'A'.
전력 요구 사항
The Orange Amp Detonator requires a 9V DC power supply (center negative). It can also operate with a 12V DC power supply for increased headroom, which may be beneficial for certain setups or to prevent clipping with high-output instruments. The current draw is approximately 12 milliamps, making it highly efficient for battery operation if desired, though a power adapter is recommended for consistent performance.
유지
- 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
- 저장: Store the pedal in a dry environment away from extreme temperatures and humidity.
- 케이블 관리: Always use high-quality instrument cables and ensure they are not kinked or damaged.
- 전원 공급 장치: Use only the recommended power supply to prevent damage to the unit.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않습니다 | Incorrect connections, no power, faulty cables. | Check all cable connections, ensure power supply is connected and functional, test with different cables. |
| 윙윙거리는/웅웅거리는 소리 | 접지 루프, 전원 공급 불량, 간섭. | Ensure Output B's transformer isolation is functioning. Try a different power outlet or isolated power supply. Check for nearby interference sources. |
| Thin/Weak sound in 'BOTH' mode | Phase cancellation between amp정수기. | Press the 'PHASE' button to invert the phase of one output. |
| LED가 켜지지 않습니다 | 전기가 없습니다. | 전원 공급 장치 연결 및 기능을 확인하세요. |
명세서
- 품목 무게: 1.54파운드(0.7킬로그램)
- 제품 크기: 6 x 3 x 5 인치
- 품목 모델 번호: Amp Detonator
- 커넥터 유형: 1/4인치 오디오
- 하드웨어 인터페이스: 1/4인치 오디오
- 신호 형식: 비슷한 물건
- 전원: 배터리 전원, 유선 전기
- 권tage: 9 Volts (can also use 12V for more headroom)
- Amp나이: 300밀리amps (typical draw is 12mA)
보증 및 지원
This Orange product is covered by a limited warranty against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official Orange Amp화 web웹사이트를 방문하거나 공인 대리점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
For further assistance, please refer to the official Orange web대지: www.오렌지amp에스닷컴
