CatEye Velo Wireless-CC-VT230W 사이클 컴퓨터 사용 설명서

소개

The CatEye Velo Wireless cycling computer, model CC-VT230W, is designed as a training aid for cyclists seeking to monitor key performance data without the clutter of wires. This device tracks current, average, and maximum speed, distance, ride time, and time of day. Utilizing this data can assist in improving fitness over time. The unit includes a mount compatible with stems or handlebars.

제품 끝view

The CatEye Velo Wireless computer provides essential cycling metrics. It features an easy-to-read display and simple button interface for navigation.

주요 특징:

• Easy to install on most bikes
• Programmable odometer
• Menu screen for setting changes
• Pace arrow indicator
• Automatic Start/Stop function
• Analog Wireless connectivity
• Includes a zip tie mount compatible with stem or handlebars
• Functions include: Current speed, Average speed, Maximum speed
• Records trip distance and total distance
• 경과 시간 카운터
• Calorie consumption counter

구성 요소:

앞쪽 view of the CatEye Velo Wireless cycle computer, showing the display and single button.

All components included with the CatEye Velo Wireless: the computer unit, sensor, wheel magnet, mount, and zip ties.

뒤쪽 view of the CatEye Velo Wireless computer, showing the battery compartment and mounting points.

사이드 프로file of the CatEye Velo Wireless computer, highlighting its slim design.

설정

Proper setup is crucial for accurate readings. This section guides you through the installation process.

초기 구성:

1. 배터리 설치 : Open the battery compartment on the back of the computer unit and insert the CR2032 battery, ensuring correct polarity.
2. 전원 켜기: The unit will power on automatically or by pressing the main button.
3. 단위 설정: Navigate through the menu to select your preferred units (mph or kph).
4. Set Wheel Size: Accurately measure your bicycle's wheel circumference and input the value into the computer. Refer to your bicycle's manual or online resources for common wheel sizes.
5. 시간 설정: Adjust the current time and select 12-hour or 24-hour format.

Mounting the Components:

1. Mount the Computer: Attach the computer mount to your bicycle's stem or handlebars using the provided zip ties. Ensure it is securely fastened and positioned for easy view주고받음.
2. 센서 장착: Secure the speed sensor to your bicycle's front fork using zip ties. Position it so that the magnet on the spoke will pass closely by the sensor.
3. 자석을 부착하세요: Fasten the wheel magnet to a spoke on your front wheel. Adjust its position so that it aligns with the sensor and passes within 5mm (0.2 inches) of the sensor's marked area with each wheel rotation.
4. 테스트 연결: Spin the front wheel to verify that the computer registers speed. If not, check the alignment of the sensor and magnet, and ensure batteries are correctly installed.

설정 비디오 가이드:

For a visual guide on setting up your CatEye Velo Wireless computer, please watch the official video below:

작업

The CatEye Velo Wireless is designed for intuitive operation. Use the single button to cycle through display modes and access settings.

디스플레이 모드 :

Press the main button on the front of the unit to switch between different display modes:

• Current Speed (SPD): 실시간 속도를 보여줍니다.
• Average Speed (AV): Displays your average speed for the current trip.
• Maximum Speed (MX): 이번 여정에서 달성한 최고 속도를 기록합니다.
• Trip Distance (DST): 현재 이동 경로를 보여줍니다.
• Total Distance (ODO): 총 누적 거리를 표시합니다.
• Elapsed Time (TM): 현재 라이딩의 지속 시간을 보여줍니다.
• 시계: 현재 시간을 표시합니다.
• Calorie Consumption (CAL): Estimates calories burned during the ride.

자동 시작/중지:

The computer automatically starts recording when you begin cycling and pauses when you stop, resuming when you start moving again. This conserves battery life and simplifies operation.

여행 데이터 재설정:

To reset trip-specific data (Average Speed, Maximum Speed, Trip Distance, Elapsed Time, Calorie Consumption), navigate to any of these modes and press and hold the main button until the values reset to zero.

유지

To ensure the longevity and optimal performance of your CatEye Velo Wireless computer, follow these maintenance guidelines:

• 청소: 본체와 센서를 부드러운 천으로 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 배터리 교체: When the low battery indicator appears, replace the CR2032 battery in both the computer unit and the sensor (if applicable). Ensure proper disposal of old batteries according to local regulations.
• 저장: If storing the unit for an extended period, remove the batteries to prevent leakage. Store in a cool, dry place away from direct sunlight.
• 방수 기능: The device is rated IPX8, meaning it is protected against continuous immersion in water under specified conditions. However, avoid prolonged submersion or high-pressure water jets.

문제 해결

If you encounter issues with your CatEye Velo Wireless computer, refer to the following common problems and solutions:

명세서

보증 및 지원

The CatEye Velo Wireless computer typically comes with a manufacturer's warranty. Please refer to the product packaging or the official CatEye web구체적인 보증 약관은 해당 사이트에서 확인하세요.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact CatEye customer service through their official channels. You can often find contact information on the product packaging or on the manufacturer's web대지.

This device is rated IPX8 based on JIS C0920. For more information on certifications, you may visit the official certification body: Sertifikasi Postel.