1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Cisco CP-DX80-VESA VESA Adapter and Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or connected devices. Retain this manual for future reference.
2. 안전 정보
설치 및 사용 시 다음 안전 수칙을 준수하십시오.
- 경고: Improper installation can result in serious personal injury or damage to equipment. Ensure all mounting hardware is securely fastened.
- 주의: Do not exceed the weight capacity specified for this mount. Refer to the specifications section for details.
- Ensure the wall structure can safely support the combined weight of the mount and the attached device.
- Use appropriate tools and follow all steps carefully. If unsure, consult a qualified installer.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Cisco CP-DX80-VESA VESA Adapter
- 벽걸이 브라켓
- 설치용 하드웨어 키트(나사, 앵커, 와셔)
- 사용 설명서
Image: The Cisco CP-DX80-VESA VESA Adapter and Wall Mount. This image displays the primary components of the product, including the adapter plate and the wall mounting bracket, designed to secure a video conferencing system to a wall.
4. 설정 및 설치
4.1 필요한 도구
- 송곳
- 드릴 비트 (벽 재질에 적합한 것)
- 십자 드라이버
- 수준
- 연필
- 스터드 파인더 (석고보드 설치 시 권장)
4.2 벽걸이 설치
- 위치 선택: Choose a suitable wall location, ensuring it can support the weight of the mount and the device. Avoid areas with electrical wires or plumbing.
- 드릴 구멍 표시: Hold the wall mount bracket against the wall at the desired height. Use a level to ensure it is straight. Mark the drill hole locations with a pencil.
- 드릴 구멍: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall type (e.g., wood studs, concrete, drywall with anchors).
- 안전한 브라켓: Insert wall anchors (if required) into the pilot holes. Align the wall mount bracket with the holes and secure it to the wall using the provided screws. Ensure it is firmly attached.
4.3 VESA Adapter Attachment to Device
- VESA 패턴을 식별하십시오: Locate the VESA mounting holes on the back of your Cisco DX80 video conferencing system.
- 어댑터 부착: Align the Cisco CP-DX80-VESA adapter with the VESA mounting holes on the DX80 device.
- 보안 어댑터: Use the appropriate screws from the mounting hardware kit to securely fasten the VESA adapter to the DX80 device. Do not overtighten.
4.4 Mounting the Device to the Wall Bracket
- Lift Device: Carefully lift the DX80 device with the attached VESA adapter. It is recommended to have assistance for this step.
- Engage Mount: Hook the VESA adapter onto the wall mount bracket. Ensure the adapter is fully seated and engaged with the bracket's locking mechanism.
- 보안 장치: Depending on the design, there may be additional screws or clips to secure the device to the wall bracket. Fasten these as instructed to prevent accidental dislodging.
- 최종 확인: Gently pull on the mounted device to ensure it is stable and securely attached to the wall.
5. 운영 고려 사항
Once the Cisco DX80 is securely mounted using the CP-DX80-VESA adapter and wall mount, its operation remains consistent with its standard functionality. The mount provides a stable platform for the device.
- Ensure all cables (power, network, video) are properly connected and routed to avoid strain or interference.
- Periodically check the stability of the mount and the device, especially after any adjustments or movement.
6. 유지관리
The Cisco CP-DX80-VESA VESA Adapter and Wall Mount requires minimal maintenance.
- 청소: 마운트 표면은 부드럽고 마른 천으로 닦아주세요. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피해주세요.
- 점검: Periodically inspect all mounting screws and connections to ensure they remain tight. Over time, vibrations or environmental factors can cause screws to loosen.
- 손상: If any part of the mount appears damaged or worn, discontinue use and contact Cisco support for replacement parts or advice.
7. 문제 해결
This section addresses common issues related to the installation and stability of the mount.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 마운트가 불안정하거나 흔들리는 느낌이 듭니다. | Loose mounting screws; inadequate wall support; incorrect anchors. | Tighten all screws. Verify wall structure and use appropriate anchors. Reinstall if necessary. |
| Device not attaching correctly to VESA adapter. | Incorrect screw size; misalignment. | Ensure correct VESA screws are used. Realign the adapter with the device's mounting holes. |
| Wall mount bracket not level. | 설치 오류입니다. | Remove bracket, re-mark holes using a level, and reinstall. |
8. 사양
Key technical specifications for the Cisco CP-DX80-VESA VESA Adapter and Wall Mount:
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | CP-DX80-VESA |
| 제품 치수 | 10.63 x 16.14 x 3.54 인치 |
| 품목 무게 | 2.2파운드 |
| 하드웨어 인터페이스 | Ethernet (for connected device) |
| 제조업체 | 시스코 시스템즈 주식회사 |
| 첫 번째 이용 가능 날짜 | 21년 2015월 XNUMX일 |
| 한국어: | 882658710469 |
9. 보증 및 지원
For information regarding the product warranty, please refer to the official Cisco warranty documentation provided with your original purchase or visit the Cisco web사이트 내용과 실제 보증 조건은 지역 및 제품에 따라 다를 수 있습니다.
9.1 기술 지원
If you encounter issues that cannot be resolved using the troubleshooting guide, or require further assistance, please contact Cisco Technical Support:
- Web대지: Visit the official Cisco support website for documentation, FAQs, and contact options.
- 핸드폰: Refer to your product's packaging or the Cisco web지역별 지원 전화번호 안내 사이트입니다.
When contacting support, please have your product model number (CP-DX80-VESA) and purchase information readily available.
