소개
The Sena SC-A0318 Helmet Communication System is designed to enhance your riding experience by providing seamless communication and audio features within your helmet. This manual will guide you through the setup, operation, and maintenance of your device.
패키지 내용
The Sena SC-A0318 Helmet Communication System package includes the following components:
- Main Unit (Sena SC-A0318)
- 헬멧 Clamp 전부
- Attachable Boom Microphone
- 유선 마이크
- Speakers (integrated with clamp 전부)
- Hook and Loop Fasteners for speakers and microphones
- Allen Wrench for clamp 설치
- USB 충전 케이블
Image: All components included in the Sena SC-A0318 Helmet Communication System package.
설정 및 설치
1. Installing the Helmet Clamp 단위
The helmet clamp unit is essential for mounting the Sena SC-A0318 to your helmet.
- Loosen the screws on the helmet clamp 제공된 앨런 렌치를 사용합니다.
- cl을 슬라이드하세요amp between the helmet shell and the inner padding on the left side of your helmet. Ensure it is securely positioned.
- cl의 나사를 조이세요.amp to firmly secure it to the helmet.
- Connect the main unit to the clamp. It should click into place.
2. 스피커 및 마이크 설치
The Sena SC-A0318 includes speakers and microphone options for clear audio.
- Remove the cheek pads from your helmet to access the speaker pockets.
- Attach the hook and loop fasteners to the back of the speakers.
- Place the speakers into the helmet's speaker pockets, ensuring they are centered over your ears. Route the speaker wires neatly under the helmet padding.
- 원하는 마이크를 선택하세요:
- 붐 마이크: Ideal for open-face or modular helmets. Attach the boom microphone to the helmet clamp and position it near your mouth.
- 유선 마이크: Suitable for full-face helmets. Attach the wired microphone to the helmet interior, ensuring it is close to your mouth but not obstructing your vision.
- Reinstall the helmet's cheek pads and ensure all wires are tucked away securely.
작동 지침
전원 켜기/끄기
To power on the Sena SC-A0318, press and hold the Jog Dial and the Phone Button simultaneously until you hear "Hello".
To power off, press and hold the Jog Dial and the Phone Button simultaneously until you hear "Goodbye".
볼륨 조절
Rotate the Jog Dial clockwise to increase the volume.
Rotate the Jog Dial counter-clockwise to decrease the volume.
블루투스 인터콤 페어링
The Sena SC-A0318 supports 4-way Bluetooth intercom with a working distance of up to 900 meters (0.6 miles) in open terrain.
- Ensure all Sena units are powered on.
- On each unit, press and hold the Jog Dial until you hear "Intercom Pairing" and see red flashing lights.
- On one of the units, press the Jog Dial once. The units will automatically connect.
전화 페어링
To pair your Sena SC-A0318 with your smartphone:
- 장치의 전원이 켜져 있는지 확인하십시오.
- Press and hold the Phone Button until you hear "Phone Pairing" and see red and blue flashing lights.
- On your smartphone, go to Bluetooth settings and select "Sena SC-A0318" from the list of available devices.
- Once paired, you will hear "Your headset is paired" and the light will change to a blue flashing light.
Making/Receiving Calls & Music
Once paired with your phone, you can:
- Answer a call: Press the Phone Button.
- End a call: Press the Phone Button.
- Play/Pause music: Press the Phone Button.
- Skip track: Rotate the Jog Dial clockwise.
- Previous track: Rotate the Jog Dial counter-clockwise.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | SC-A0318 (843-02001) |
| 품목 무게 | 5.6 온스 |
| 제품 치수 | 9.3 x 4.1 x 1.6 인치 |
| 배터리 | 리튬 폴리머 배터리 1개 필요 |
| 인터콤 범위 | Up to 900 meters (0.6 miles) in open terrain |
| 인터콤 지원 | 최대 4명의 라이더 |
| 통화 시간 | 최대 12시간 |
| 충전 시간 | 2.5시간 |
| 특별 기능 | Advanced Noise Control, Glove-Friendly Jog Dial |
문제 해결
전원이 없습니다
If the unit does not power on, ensure it is fully charged. Connect the unit to a power source using the USB cable and allow it to charge for at least 2.5 hours.
인터콤 끊기
If intercom connection is lost, ensure all units are within range and re-initiate pairing as described in the "Bluetooth Intercom Pairing" section.
오디오 문제
Check speaker and microphone connections. Ensure speakers are correctly positioned over your ears and the microphone is close to your mouth. Adjust volume using the Jog Dial.
유지 보수 및 관리
- Keep the unit clean by wiping it with a soft, damp 옷감. 가혹한 화학 물질이나 용제를 사용하지 마십시오.
- Ensure the USB charging port cover is securely closed when not charging to prevent dust and moisture ingress.
- 사용하지 않을 때에는 장치를 서늘하고 건조한 곳에 보관하십시오.
- Regularly check for firmware updates via the Sena Device Manager to ensure optimal performance and access to new features.
보증 및 지원
For warranty information and technical support, please refer to the official Sena web해당 웹사이트를 방문하거나 가까운 대리점에 문의하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
온라인 자료 및 FAQ는 다음에서 확인할 수 있습니다. www.sena.com.
