1. 서론
The Bogen 1126-BG-UTI1 is a single-zone paging controller designed to integrate a paging system with a telephone system. It provides a reliable interface for making announcements over a public address system from a telephone. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Bogen paging controller.
2. 중요한 안전 정보
이 기기를 작동하기 전에 모든 안전 지침을 읽고 이해하십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
- 전원: 본 기기는 지정된 전원 공급 장치에만 연결하십시오.tage.
- 수분: 본 제품을 비나 습기에 노출시키지 마십시오.
- 통풍: 적절한 환기를 유지하세요. 환기구를 막지 마세요.
- 서비스: 모든 정비는 자격을 갖춘 서비스 담당자에게 맡기십시오. 이 제품을 직접 정비하려고 하지 마십시오.
- 청소: 마른 천으로만 닦으십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Bogen 1126-BG-UTI1 Single Zone Paging Controller Unit
- 전원 어댑터
- 사용 설명서 (본 문서)
- 장착 하드웨어(해당되는 경우)
4. 제품 오버view
The Bogen 1126-BG-UTI1 features various ports and indicators for seamless integration and operation. Familiarize yourself with the unit's components before installation.
그림 1: 앞쪽 view of the Bogen Single Zone Paging Controller. This image displays the main unit, highlighting its compact design and essential connection points for audio input and output, as well as power. The various ports and indicators are visible, crucial for understanding the device's functionality and connectivity.
4.1 전면 패널
- 전원 LED: 전원 상태를 나타냅니다.
- 입력 레벨 제어: Adjusts the audio input sensitivity.
- 출력 레벨 제어: 오디오 출력 볼륨을 조절합니다.
4.2 후면 패널
- 전화선 입력: RJ-11 jack for connecting to the telephone system.
- 오디오 출력: RCA or screw terminal connections for connecting to an amp리퍼.
- 전원 입력: Jack for connecting the power adapter.
- MOH Output: Music On Hold output (if applicable).
5. 설정 및 설치
Follow these steps to properly install your paging controller:
- 설치: Choose a suitable location for the controller, away from excessive heat or moisture. Secure the unit using appropriate mounting hardware if desired.
- Connect to Telephone System: Connect an RJ-11 cable from your telephone system's paging port or a suitable analog extension to the "Telephone Line Input" on the controller. Consult your telephone system's manual for specific paging port details.
- 연결하기 Amp정수기: Connect the "Audio Output" of the paging controller to an available input on your paging amplifier. Ensure correct polarity if using screw terminals.
- 전원 연결: Plug the provided power adapter into the "Power Input" jack on the controller, then plug the adapter into a standard electrical outlet. The Power LED should illuminate.
- Initial Level Adjustment: Start with the Input Level and Output Level controls set to their minimum positions.
6. 사용 설명서
Once installed, the Bogen 1126-BG-UTI1 is ready for operation.
6.1 페이지 만들기
- From a telephone connected to the system, dial the designated paging access code or extension.
- Wait for the confirmation tone or voice prompt from the paging controller.
- Speak clearly into the telephone handset to make your announcement.
- Hang up the telephone when finished.
6.2 오디오 레벨 조정
- 입력 레벨: Slowly increase the "Input Level Control" until the paging audio is clear and distortion-free. If the audio is too loud or distorted, decrease this level.
- 출력 레벨 : Adjust the "Output Level Control" to achieve the desired volume through the paging speakers. This should be done in conjunction with the amplifier의 볼륨 조절.
7. 유지관리
The Bogen 1126-BG-UTI1 is designed for reliable operation with minimal maintenance.
- 청소: Periodically wipe the unit with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- 통풍: Ensure that ventilation openings remain clear of dust and debris.
- 사이: Occasionally check all cable connections to ensure they are secure.
8. 문제 해결
문제가 발생하면 다음 문제 해결 가이드를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 표시등이 켜지지 않습니다. | Power adapter not connected or faulty; no power at outlet. | Check power adapter connection. Verify outlet has power. Test with another adapter if available. |
| No paging audio. | Incorrect telephone system connection; amplifier off or muted; audio levels too low. | Verify telephone line and audio output connections. Ensure amplifier is on and not muted. Adjust Input and Output Level controls. |
| Paging audio is distorted. | Input or output levels set too high. | Reduce Input Level and/or Output Level controls. |
| Cannot access paging from telephone. | Incorrect paging access code; telephone system not configured correctly. | Confirm the correct paging access code with your telephone system administrator. Verify telephone system programming. |
If the problem persists after attempting these solutions, contact Bogen technical support.
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 1126-BG-UTI1 |
| 상표 | 보겐 |
| 패키지 크기 | 15 x 9 x 7 인치 |
| 품목 무게 | 6.7파운드 |
| ASIN | B00P1AOL2C |
| 제조업체 | 보겐 |
| Paging Zones | 단일 구역 |
| 호환성 | Telephone systems with analog paging port or extension |
10. 보증 및 지원
Bogen products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Bogen website. Technical support is available to assist with any questions or issues you may encounter.
- 온라인 지원: 방문하다 www.bogen.com/support for FAQs, documentation, and contact information.
- 연락처 정보: Refer to the Bogen website for current telephone numbers and email addresses for technical assistance.
