Radwin RW-7102-2000 IDU-E (TDM 포트 2개 포함) 사용자 설명서

1. 제품 오버view

The Radwin RW-7102-2000 IDU-E is an Indoor Unit (IDU) designed for telecommunication applications, specifically featuring 2 TDM ports. This unit also includes 2 Ethernet interfaces and external alarm interfaces, providing comprehensive connectivity and monitoring capabilities. It operates with a wide range DC power feed, from -20VDC to -60VDC. Please note that the AC/DC power adaptor (RW-9921-0032) must be ordered separately.

This image displays the Radwin RW-7102-2000 IDU-E, an indoor unit for telecommunications. It is a compact, rectangular device, predominantly white, featuring a series of indicator lights on its front panel. These lights, colored blue and red, provide visual status feedback for the unit's operation. The device is designed for integration into network infrastructure, facilitating data and voice transmission.

주요 특징:

• 2 TDM ports (RW-9312204050) for traditional telecommunication services.
• 2 Ethernet interfaces for modern IP-based network connectivity.
• External alarm interfaces for system monitoring and fault detection.
• Wide range DC power input: -20VDC to -60VDC.

2. 설정 및 설치

This section provides general guidelines for setting up your Radwin RW-7102-2000 IDU-E. For detailed installation procedures, refer to the comprehensive installation guide provided with your unit or available on the manufacturer's web대지.

2.1 풀기 및 검사

1. Carefully unpack the IDU-E unit from its packaging.
2. Inspect the unit for any signs of physical damage that may have occurred during transit. If damage is found, contact your supplier immediately.
3. 포장 목록에 기재된 모든 구성품이 있는지 확인하십시오.

2.2 전원 요구 사항

• The IDU-E requires a DC power input ranging from -20VDC to -60VDC.
• An AC/DC power adaptor (model RW-9921-0032) is required for operation but is sold separately. Ensure you have the correct adaptor before proceeding.
• Connect the power adaptor to the designated power input port on the IDU-E.

2.3 Connecting Interfaces

• TDM Ports: Connect your TDM lines to the 2 TDM ports using appropriate cabling.
• 이더넷 인터페이스: Connect your Ethernet cables to the 2 Ethernet ports for network integration.
• External Alarm Interfaces: If utilizing, connect external alarm systems to the dedicated alarm interfaces for remote monitoring.

3. 사용 설명서

Once the Radwin RW-7102-2000 IDU-E is properly installed and powered, it is ready for operation. The unit typically operates autonomously after initial configuration. Configuration details are usually managed via a network management system or direct console access, depending on your network setup.

3.1 전원 켜기

1. Ensure all necessary cables (power, TDM, Ethernet, alarms) are securely connected.
2. Apply power to the unit via the connected AC/DC adaptor.
3. Observe the indicator lights on the front panel. Refer to the unit's specific documentation for the meaning of each light (e.g., power status, link status, activity).

3.2 기본 작업

• The IDU-E facilitates the transmission of TDM and Ethernet traffic.
• Monitor the status indicators for normal operation. Green lights typically indicate active links and proper functioning.
• Any red or amber lights, or unexpected blinking patterns, may indicate a fault or an issue requiring attention.

4. 유지관리

The Radwin RW-7102-2000 IDU-E is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance and longevity.

4.1 일반 관리

• Keep the unit in a clean, dry, and well-ventilated environment.
• 기기의 과열을 방지하기 위해 기기 주변에 적절한 공기 흐름이 확보되도록 하십시오.
• 극한의 온도, 습도 또는 직사광선에 장치를 노출시키지 마십시오.

4.2 청소

• Dust the exterior of the unit periodically with a soft, dry cloth.
• 액체 세척제나 에어로졸 스프레이를 장치에 직접 사용하지 마십시오.

4.3 펌웨어 업데이트

Periodically check the Radwin support website for available firmware updates. Firmware updates can provide performance enhancements, new features, and security improvements. Follow the manufacturer's instructions carefully when performing firmware updates.

5. 문제 해결

This section provides basic troubleshooting steps for common issues. For more complex problems, consult the detailed technical documentation or contact Radwin support.

5.1 전원 없음

• 전원 연결을 확인하세요. Ensure the AC/DC power adaptor is securely connected to both the IDU-E and a working power outlet.
• 전원 확인: 전원 콘센트가 활성화되어 있는지 확인하세요.
• Inspect Adaptor: Ensure the correct Radwin AC/DC power adaptor (RW-9921-0032) is being used and that it is not damaged.

5.2 No Link on Ethernet/TDM Ports

• 케이블 확인: Ensure all Ethernet and TDM cables are properly connected and not damaged.
• Verify Peer Device: Confirm that the connected device (e.g., switch, router, TDM equipment) is powered on and functioning correctly.
• 표시등: Observe the link/activity indicator lights on the IDU-E and the connected device.

5.3 시스템 알람

• If external alarms are triggered or internal alarm indicators are active, consult the detailed product documentation for specific alarm codes and their meanings.
• Address the root cause of the alarm as indicated by the system.

6. 사양

7. 보증 정보

This Radwin RW-7102-2000 IDU-E unit comes with a 3개월 보증 from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions. For specific terms, conditions, and claim procedures, please refer to the official warranty documentation provided with your product or contact Radwin customer support.

보증 청구를 위해 구매 증명서를 보관하십시오.

8. 지원

For technical assistance, product inquiries, or to report issues, please contact Radwin customer support. You can typically find support contact information, including phone numbers, email addresses, and online support portals, on the official Radwin web대지.

제조업체: Radwin

Web대지: www.radwin.com

When contacting support, please have your product model (RW-7102-2000) and serial number ready to expedite assistance.