ASRock D1800M Micro ATX Motherboard Instruction Manual

1. 제품 오버view

The ASRock D1800M is a Micro ATX motherboard featuring an integrated Intel J1800 Dual-Core processor. Designed for compact and efficient computing, this motherboard supports DDR3 memory and offers essential connectivity for various applications.

주요 특징:

• Integrated CPU: Intel J1800 Processor (2.41GHz, Dual-Core).
• 메모리: 2x DDR3(L)-1333/1066 DIMM Slots, Dual Channel, Non-ECC, Buffered, Max Capacity of 16GB.
• 확장 슬롯: 1x PCI-Express 2.0 x16 Slot (operates at x1), 2x PCI-Express 2.0 x1 Slots.
• 저장: 2x SATA2 Ports.
• 네트워킹: Realtek RTL8111GR PCI-Express x1 Gigabit Ethernet Controller.
• 후면 I/O 포트: 1x USB 3.0 Port, 3x USB 2.0 Ports, 1x PS/2 Keyboard Port, 1x PS/2 Mouse Port, 1x VGA Port, 1x DVI-D Port, 1x HDMI Port, 1x RJ45 LAN Port, Audio I/O Jacks.
• 전원 커넥터 : 1x 24pin ATX Power Connector.

그림 1: 상향식 view of the ASRock D1800M Micro ATX Motherboard, showing the integrated CPU heatsink, RAM slots, and various connectors.

2. 설정 및 설치

2.1 Unboxing and Contents Verification

Before beginning installation, carefully unbox your ASRock D1800M motherboard and verify all contents against the packing list. Typical contents include:

• ASRock D1800M Motherboard
• I / O 실드
• SATA 데이터 케이블
• 빠른 설치 가이드
• 지원 CD(드라이버 및 유틸리티용)

Figure 2: The ASRock D1800M motherboard with its included accessories, such as the I/O shield and SATA cables.

2.2 Motherboard Installation in Chassis

1. Install the I/O shield into the rear opening of your computer chassis. Ensure it snaps securely into place.
2. Carefully align the motherboard with the standoffs inside the chassis. The integrated Intel J1800 CPU does not require separate installation.
3. Secure the motherboard to the chassis using appropriate screws. Do not overtighten.

2.3 메모리(RAM) 설치

The ASRock D1800M supports DDR3(L) DIMMs. It has two memory slots.

1. DIMM 슬롯의 양쪽 끝에 있는 클립을 엽니다.
2. DDR3 메모리 모듈의 노치를 DIMM 슬롯의 노치에 맞춥니다.
3. 클립이 제자리에 고정될 때까지 메모리 모듈을 슬롯에 단단히 삽입합니다.

2.4 Storage Device Installation (SATA)

Connect your SATA hard drives or solid-state drives to the SATA2 ports on the motherboard using the provided SATA data cables. Ensure the power cables from your power supply are also connected to the drives.

2.5 Expansion Card Installation (PCI-Express)

If installing a PCI-Express expansion card (e.g., a graphics card in the x16 slot or other cards in the x1 slots):

1. Remove the corresponding slot cover from your chassis.
2. Align the card with the PCI-Express slot and press firmly until it is seated correctly.
3. 카드를 나사로 섀시에 고정하십시오.

2.6 전원 연결

파워서플라이의 24핀 ATX 전원 커넥터를 마더보드의 해당 헤더에 연결하십시오.

2.7 주변기기 연결하기

Connect your keyboard, mouse, monitor (via VGA, DVI-D, or HDMI), Ethernet cable, and any other USB devices to the appropriate ports on the rear I/O panel.

Figure 3: The rear I/O panel of the ASRock D1800M motherboard, featuring various ports for connecting peripherals.

3. 사용 설명서

3.1 초기 부팅

After all components are installed and connected, power on your system. The system should display the ASRock logo and enter the BIOS/UEFI setup utility or begin booting from an installed operating system.

3.2 BIOS/UEFI 설정

BIOS/UEFI 설정 유틸리티를 시작하려면 다음을 누르세요. 델 or F2 초기 부팅 시퀀스 동안 키를 누릅니다. 여기서 시스템 설정, 부팅 순서를 구성하고 하드웨어 상태를 모니터링할 수 있습니다.

3.3 운영 체제 설치

Insert your operating system installation media (USB drive or DVD) and follow the on-screen instructions to install your preferred operating system. Ensure you install all necessary drivers from the provided support CD or ASRock's web최적의 성능을 위한 사이트입니다.

4. 유지관리

4.1 청소

컴퓨터 내부를 정기적으로 청소하여 먼지 축적을 방지하고 과열을 예방하세요. 팬, 방열판 및 기타 부품의 먼지는 압축 공기를 사용하여 제거하십시오. 청소하기 전에 시스템 전원을 끄고 전원 케이블을 뽑으십시오.

4.2 BIOS 업데이트

ASRock을 주기적으로 확인하세요 website for BIOS/UEFI updates. Updates can improve system stability, add new features, or enhance compatibility. Follow the instructions provided by ASRock carefully when performing a BIOS update.

4.3 드라이버 업데이트

Keep your system drivers updated. Visit the ASRock support page for the D1800M model to download the latest drivers for chipset, audio, LAN, and graphics.

5. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대한 해결책을 제공합니다.

5.1 전원 없음 / 부팅 안 됨

• Ensure the 24-pin ATX power connector is securely seated.
• Verify that the power supply is functioning correctly and switched on.
• 전면 패널(전원 버튼, 리셋 버튼)과 마더보드의 연결 상태를 확인하십시오.

5.2 디스플레이 출력 없음

• Confirm that your monitor is connected to the correct display output (VGA, DVI-D, or HDMI) on the motherboard.
• If using a discrete graphics card, ensure the monitor is connected to the graphics card's output, not the motherboard's.
• Reseat memory modules to ensure they are properly installed.

5.3 주변 장치가 감지되지 않음

• For USB devices, try connecting to a different USB port.
• For SATA drives, check both data and power cable connections. Verify the drive is enabled in BIOS/UEFI.
• Ensure the latest drivers for the peripheral are installed.

5.4 시스템 불안정성/충돌

• 과열 여부를 확인하십시오. CPU 쿨러가 제대로 설치되었는지, 팬이 정상적으로 작동하는지 확인하십시오.
• 메모리 진단 도구를 실행하여 RAM에 오류가 있는지 확인하십시오.
• 모든 운전자가 최신 정보를 갖추고 있는지 확인하세요.

6. 사양

7. 보증 및 지원

This ASRock motherboard is covered by a manufacturer's warranty. For specific warranty terms, duration, and support procedures, please refer to the warranty card included with your product or visit the official ASRock web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For technical assistance, driver downloads, and BIOS updates, please visit the ASRock support web대지: www.asrock.com/support