CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

소개

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

중요한 안전 정보

화재, 감전, 신체 상해의 위험을 줄이려면 전기 제품을 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.

패키지 내용

Your CLOVER D1-K water cooler package includes:

명세서

모델디1-케이
제품 유형Hot and Cold Countertop Bottleless Water Dispenser
제품 치수폭 10.7인치 x 깊이 16.8인치 x 높이 17.2인치
제품 무게Net: 26 lbs, Gross: 31 lbs
제품 색상블랙 앤 실버
전기 같은110V 콘센트
냉매 유형R134a
압축기 유형LG
인증UL
물 온도뜨겁고 차갑다
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water Thermostat32°F ~ 50°F까지 조절 가능
온수 온도 조절 장치Controlled to 185°F
내장형 필터 시스템
필터 수명750 gallons or 12 months
에너지 스타 등급

설정

1. 배치

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. 수도관 연결

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

내부 view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

작동 지침

1. 물 분배

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

앞쪽 view of the Clover D1-K water cooler with hot and cold water faucets
그림 3: 전면 view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

유지

1. 청소

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp 옷감.

2. 필터 교체

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

문제 해결

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

보증

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 부품 1년 보증 그리고 압축기 3년 보증 구매일로부터 1년입니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오. 본 보증은 정상적인 사용 상태에서 발생하는 재료 및 제조상의 결함에 적용됩니다.

지원하다

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER web대지.

관련 문서 - 디1-케이

사전view 클로버 POS 시스템 가이드: 소프트웨어 계획, 설정 및 문제 해결
소프트웨어 계획 세부 정보, 장치 설정, 타사 앱 통합, 일반적인 문제 해결 및 비즈니스 운영 관리에 대한 내용을 다루는 Clover POS 시스템에 대한 포괄적인 가이드입니다.
사전view Clover P2PE 구현 매뉴얼 v5.0: 보안 결제 처리 가이드
이 매뉴얼은 Clover의 지점 간 암호화(P2PE) 솔루션 구현에 대한 자세한 지침을 제공합니다. Clover 결제 단말기의 승인된 장치, 설치, 보안 프로토콜 및 문제 해결에 대해 알아보세요.
사전view 클로버 P2PE 구현 매뉴얼: 보안 결제 장치 설정 및 보안
이 매뉴얼은 클로버의 지점 간 암호화(P2PE) 솔루션을 구현하기 위한 자세한 지침을 제공하며, 여기에는 장치 설정, 보안 프로토콜, 클로버 결제 단말기의 문제 해결 등이 포함됩니다.
사전view 클로버 P2PE 구현 매뉴얼: 안전한 결제 처리 가이드
이 매뉴얼은 Clover Mobile, Mini 및 Flex 기기에 대한 P2PE(지점 간 암호화) 구현에 대해 자세히 설명하며, 안전한 결제 거래를 위한 설정, 보안 및 PCI 규정 준수에 대한 내용을 다룹니다.
사전view 클로버 모바일 설치 가이드: 설정, 활성화 및 거래
결제 처리를 위한 Clover 모바일 기기 설정, 활성화 및 사용에 대한 종합 가이드입니다. 하드웨어 설정, 네트워크 연결, 앱 설치, PIN 관리, 프린터 페어링 및 거래 처리에 대한 내용을 다룹니다.
사전view 클로버 미니 3 POS 시스템 사양 및 기능
컴팩트한 카운터탑 스마트 POS 시스템인 클로버 미니 3의 자세한 사양과 기능을 소개합니다. 클로버 미니 2와의 비교, 연결 옵션, 액세서리 및 결제 흐름이 포함되어 있습니다.