1. 제품 오버view
The RAB Lighting GL100 Series Clear Globe Glass is a replacement globe designed for various lighting fixtures. It features crystal clear glass and is built to be thermal shock-resistant, making it suitable for both indoor and outdoor applications. This globe is compatible with light bulbs up to 150W and features 3-5/32" threads for secure attachment.
이미지 1.1: The RAB Lighting GL100 Clear Globe Glass, showcasing its transparent design and threaded base.
주요 특징:
- Crystal clear glass construction.
- Designed for use with light bulbs up to 150W.
- Features 3-5/32" threads for secure installation.
- Thermal shock-resistant glass for enhanced durability.
- Suitable for both indoor and outdoor usage.
2. 설치 지침(Setup)
This section provides step-by-step instructions for safely installing the RAB Lighting GL100 Series Clear Globe Glass. Ensure power is off before beginning installation.
안전 예방 조치:
- Always disconnect power to the fixture at the circuit breaker before installation or maintenance.
- Allow the existing bulb and fixture to cool completely before handling.
- Wear appropriate safety gear, such as gloves, to prevent cuts from broken glass or electrical shock.
- Handle the glass globe carefully to avoid breakage.
설치 단계:
- 고정물 준비: Ensure the power to the lighting fixture is turned off at the main circuit breaker. If replacing an existing globe, carefully unscrew and remove the old globe. Dispose of any broken glass safely.
- Inspect the Threads: Verify that the threads on your lighting fixture are clean and free from debris. The GL100 globe features 3-5/32" threads.
- Insert Light Bulb (if applicable): If your fixture requires a new bulb, screw it into the socket before attaching the globe. Ensure the bulb wattage는 150W를 초과하지 않습니다.
- Attach the New Globe: Carefully align the threads of the RAB Lighting GL100 globe with the threads on your lighting fixture. Gently screw the globe onto the fixture in a clockwise direction until it is snug. Do not overtighten, as this can damage the globe or fixture.
- 복원력 : Once the globe is securely installed, restore power to the fixture at the circuit breaker. Test the light to ensure proper function.
이미지 2.1: Illustration of the 3-5/32" threads on the globe, crucial for proper fitment.
3. 사용 설명서
The RAB Lighting GL100 Series Clear Globe Glass functions as a protective and aesthetic enclosure for your light bulb. Once installed, its operation is passive and directly tied to the light fixture it is part of.
- The globe protects the light bulb from environmental elements (e.g., dust, moisture, minor impacts) and contributes to the fixture's overall appearance.
- To operate the light, use the switch or control mechanism of the fixture itself. The globe does not have independent operational controls.
- The thermal shock-resistant property ensures the globe can withstand temperature changes, making it suitable for outdoor use where weather conditions vary.
이미지 3.1: The globe provides protection for the light source, as indicated by the shield icon.
이미지 3.2: The thermal shock-resistant glass is designed to withstand diverse weather conditions, suitable for outdoor applications.
4. 유지관리
Regular cleaning of the RAB Lighting GL100 Series Clear Globe Glass will maintain its clarity and ensure optimal light output.
청소 지침:
- 전원 분리: 청소하기 전에 항상 차단기에서 조명 기구의 전원을 끄십시오.
- 식히도록 두십시오: Ensure the globe and light bulb are cool to the touch before cleaning.
- 부드러운 세척: 부드러운 d를 사용하세요amp cloth with mild soap and water to wipe the exterior of the glass globe. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the glass.
- 건조: Dry the globe thoroughly with a clean, soft cloth to prevent water spots.
- 재조립: If the globe was removed for cleaning, carefully reattach it following the installation steps. Restore power once complete.
5. 문제 해결
This section addresses common issues that may arise with the RAB Lighting GL100 Series Clear Globe Glass.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Globe does not fit the fixture. | Incorrect thread size or diameter. | Verify the fixture's thread size matches the globe's 3-5/32" threads. Ensure the globe's diameter (3-9/16 inches) is compatible with the fixture. |
| Globe appears loose after installation. | Not tightened sufficiently or damaged threads. | Gently tighten the globe clockwise until snug. Do not overtighten. If threads are damaged, the globe or fixture may need replacement. |
| Globe breaks during installation or use. | Excessive force during installation, impact, or manufacturing defect. | Handle with care. If breakage occurs, safely dispose of broken glass and replace the globe. Contact customer support if a manufacturing defect is suspected. |
| 광 출력이 감소했습니다. | Dirty globe or incorrect bulb wattage. | Clean the globe as per maintenance instructions. Ensure the light bulb wattage is appropriate for the fixture and does not exceed 150W. |
6. 사양
Detailed technical specifications for the RAB Lighting GL100 Series Clear Globe Glass.
| 상표 | 랩 라이팅 |
| 모델 번호 | GL100 |
| 재료 | 유리 |
| 색상 | 분명한 |
| 모양 | 지구 |
| 품목 무게 | 1.06파운드 |
| 나사산 크기 | 3-5/32 인치 |
| 조립된 직경 | 3-9/16 인치 |
| 최대 와트tag전자 호환성 | 150 와트 |
| 특별 기능 | Thermal shock-resistant |
| 용법 | 실내, 실외 |
| 포함된 구성 요소 | 유리 글로브 |
7. 보증 및 지원
RAB Lighting is committed to providing high-quality products. For specific warranty information regarding the GL100 Series Clear Globe Glass, please refer to the official RAB Lighting web사이트를 방문하거나 고객 지원팀에 직접 문의하세요.
For technical assistance, replacement parts, or any inquiries, please visit the RAB Lighting official web대지 또는 고객 서비스 부서에 문의하세요.
