1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Oasis P8SBF VersaFiller Water Cooler and Bottle Filler Combination. This unit is designed to provide convenient access to drinking water and facilitate bottle filling in various environments, including workplaces, schools, universities, and public buildings. The VersaFiller is compatible with Oasis P8AC and P8ACSL wall mount water coolers and can be retrofitted to existing installations.
2. 주요 특징
- 다양한 호환성: Designed to be retrofitted to existing Oasis P8AC and P8ACSL wall mount water coolers.
- 항균 보호: The VersaFiller alcove and activation button incorporate Freshield, a silver-based antimicrobial compound, to inhibit the growth of mold and mildew.
- 이중 기능: Provides both traditional water cooler access and a dedicated bottle filling station.
- 내구성 있는 구조: Features a stainless steel cooler and metal components for long-lasting performance.
- Self-Cleaning Style: Designed for ease of maintenance and hygiene.
3. 설치 및 설정
The Oasis P8SBF VersaFiller is designed for wall-mounted installation and can be integrated with compatible Oasis water coolers. Professional installation is recommended to ensure proper plumbing and electrical connections.
3.1 설치 전 체크리스트
- Verify that the installation location has adequate water supply and drainage.
- Ensure a grounded electrical outlet (230V AC, 50Hz) is available within reach of the unit's power cord.
- Confirm compatibility with your existing Oasis P8AC or P8ACSL water cooler model.
- Gather necessary tools: wrench, screwdriver, level, drill, measuring tape.
3.2 장착 지침
- Turn off the main water supply and disconnect power to the existing water cooler.
- Carefully remove any existing components as per the instructions for retrofitting the VersaFiller.
- Position the VersaFiller unit on the wall at the desired height, ensuring it is level. Mark the mounting points.
- Drill pilot holes and securely fasten the unit to the wall using appropriate mounting hardware (not included, consult local building codes).
- Connect the water supply line to the unit's inlet and the drain line to the waste system. Ensure all connections are tight to prevent leaks.
- 장치를 접지된 전기 콘센트에 꽂습니다.
- 천천히 주요 물 공급을 켜고 누수가 있는지 확인하세요.
- Allow the unit to fill and cool the water before first use.
Figure 1: Oasis P8SBF VersaFiller Water Cooler and Bottle Filler Combination. This image displays the complete unit, highlighting its dual functionality for drinking and bottle filling.
4. 사용 설명서
The Oasis P8SBF offers two primary methods for water dispensing:
4.1 Drinking Fountain Operation
- Approach the lower drinking fountain basin.
- Press the activation button located on the front of the unit (or use the foot pedal if equipped and installed).
- Water will flow from the bubbler. Release the button to stop the flow.
4.2 Bottle Filling Operation
- Place your water bottle or container within the bottle filling alcove.
- Press the dedicated activation button for the bottle filler, typically located near the alcove.
- Water will dispense into your bottle. Release the button when the bottle is filled to your desired level.
5. 유지관리
Regular maintenance ensures optimal performance and hygiene of your Oasis P8SBF unit. The unit features a self-cleaning style and Freshield antimicrobial protection, but routine cleaning is still essential.
5.1 정기 청소
- 외부 표면: Wipe down the exterior surfaces, including the stainless steel cooler and bottle filler alcove, with a soft cloth damp순한 비누와 물로 세척하십시오. 연마성 세제나 용제 사용은 피하십시오.
- Drip Tray/Basin: Regularly clean the drip tray and drinking basin to remove any accumulated water or debris. The drip tray is typically removable for easier cleaning.
- Bubbler/Nozzle: Periodically clean the bubbler and bottle filler nozzle to prevent mineral buildup. Use a small brush if necessary.
5.2 필터 교체 (해당되는 경우)
If your Oasis water cooler system includes a water filter, refer to the filter manufacturer's instructions for recommended replacement intervals. Typically, filters should be replaced every 6-12 months, or as indicated by a filter change indicator light (if present).
5.3 Winterization (If Applicable)
If the unit is installed in an unheated area where temperatures may drop below freezing, it must be properly winterized to prevent damage. This typically involves draining all water from the unit and disconnecting the water supply. Consult a qualified technician for proper winterization procedures.
6. 문제 해결
This section addresses common issues you might encounter with your Oasis P8SBF unit. For problems not listed here, or if solutions do not resolve the issue, contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No water flow from bubbler or bottle filler. |
|
|
| Water flow is slow or weak. |
|
|
| 물은 차갑지 않습니다. |
|
|
| 새는 물. |
|
|
7. 사양
The following table outlines the key specifications for the Oasis P8SBF VersaFiller Water Cooler and Bottle Filler Combination:
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | P8SBF |
| 색상 | Stainless Steel Silver & Light Grey |
| 재료 | 금속 |
| 용량 | 18.92리터 |
| 상표 | 오아시스 |
| 스타일 | 셀프 클리닝 |
| 왓tage | 460 와트 |
| 설치 유형 | 벽걸이형 |
| 전원 | 코드식 전기 |
| 제품 크기(LxWxH) | 45.09 x 47.63 x 101.6cm |
| 품목 무게 | 26.76kg(26kg 800g) |
| 제조업체 | Oasis Coolers |
| 한국어: | 092026170980 |
8. 보증 및 지원
Specific warranty details for the Oasis P8SBF VersaFiller are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for warranty claims.
For technical support, service, or to inquire about replacement parts, please contact Oasis customer service or your authorized dealer. Contact information can usually be found on the manufacturer's official web사이트 또는 제품 포장에 표시되어 있습니다.
온라인 리소스: For the most up-to-date information, FAQs, and additional support resources, visit the official Oasis web대지.
