소개
This manual provides comprehensive instructions for the installation, operation, maintenance, and rekeying of your Weiser Lock GDC9471 Elements Single Cylinder Deadbolt. This deadbolt is designed for security and convenience, featuring SmartKey technology for easy rekeying and enhanced resistance against picking and bumping.
Image: Weiser Lock GDC9471 Elements Single Cylinder Deadbolt, showing the exterior key cylinder and interior thumb turn components.
제품 특징
- Single Cylinder Design: Key access from the exterior, thumb turn operation from the interior.
- Full 1-inch Throw: Provides enhanced security with a robust deadbolt extension.
- 스마트키 보안: Features a Kwikset chassis with SmartKey cylinder technology, eliminating traditional pins and springs.
- Rekeying Capability: Allows for instant rekeying in three simple steps using the included learning tool.
- 강화된 보안: Designed to be bump-resistant and highly pick-resistant.
- 조절 가능한 백셋: Standard adjustable backset for versatile installation.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Exterior Deadbolt Cylinder Assembly
- Interior Thumb Turn Assembly
- 데드볼트 잠금장치
- 스트라이크 플레이트
- 장착 나사
- 표준 키
- SmartKey Rekeying Learning Tool
설치 요구 사항
올바른 설치를 위해 문이 다음 사양을 충족하는지 확인하십시오.
- 문 두께: Fits all standard doors 1-3/4 inches thick.
- Crossbore Hole: Requires a 2-1/8 inch diameter crossbore hole.
- 에지 보어: Requires a 1 inch diameter edge bore.
- 역수: Compatible with 2-3/8 inch to 2-3/4 inch adjustable backsets.
For detailed installation steps, refer to the diagram included with your product packaging. Professional installation is recommended if you are unfamiliar with door hardware installation.
작동 지침
데드볼트 잠금:
- 외부에서: Insert the key into the exterior cylinder and turn it 90 degrees clockwise to extend the deadbolt into the strike plate. Remove the key.
- 인테리어에서: Rotate the thumb turn on the interior assembly to extend the deadbolt into the strike plate.
데드볼트 잠금 해제:
- 외부에서: Insert the key into the exterior cylinder and turn it 90 degrees counter-clockwise to retract the deadbolt. Remove the key.
- 인테리어에서: Rotate the thumb turn on the interior assembly to retract the deadbolt.
SmartKey 재키잉 지침
The SmartKey feature allows you to rekey your deadbolt to a new key in three simple steps. This is useful for security updates or if you wish to use a single key for multiple SmartKey locks.
- 현재 키를 삽입하세요: Insert your currently working key fully into the cylinder and turn it 90 degrees clockwise to the horizontal position.
- Insert Learning Tool: While the current key is still turned 90 degrees, insert the SmartKey learning tool fully into the small hole on the face of the cylinder. Remove the learning tool.
- 새 키 삽입: Remove the current key. Insert your new key fully into the cylinder and turn it 180 degrees counter-clockwise back to the vertical position. Your lock is now rekeyed to the new key. Test the new key to ensure proper operation.
중요한: Always test the new key with the door open first to avoid accidental lockout.
유지
Regular maintenance ensures the longevity and smooth operation of your deadbolt.
- 청소: 부드러운 천으로 외부 표면을 청소하세요.amp 천으로 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
- 매끄럽게 하기: If the deadbolt mechanism feels stiff, apply a small amount of graphite-based lubricant (not oil-based) into the keyway and the latch mechanism. Do not over-lubricate.
- 나사 조임 정도: Periodically check and tighten all mounting screws to ensure the deadbolt remains securely fastened to the door. Do not overtighten.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 열쇠가 돌아가지 않거나 뻑뻑합니다. | Incorrect key, debris in keyway, or lack of lubrication. | Ensure you are using the correct key. Clean keyway with compressed air. Apply graphite lubricant. |
| 데드볼트가 완전히 확장되거나 수축되지 않습니다. | Misalignment with strike plate, loose screws, or obstruction. | Check strike plate alignment and adjust if necessary. Tighten mounting screws. Ensure no debris obstructs the bolt path. |
| Thumb turn is loose or not engaging. | Loose interior assembly screws. | Remove interior cover and tighten the screws that secure the thumb turn assembly. |
명세서
| 상표 | 바이저 |
| 모델 번호 | GDC9471 11P K3 SMT MS RL |
| 실린더 유형 | 단일 실린더 |
| 키웨이 | 스마트키 |
| 백셋 크기 | 조절 가능 2-3/8인치 ~ 2-3/4인치 |
| Exterior Access | 열쇠 |
| Interior Action | 엄지 회전 |
| Standard Door Thickness | 1-3/4인치 |
| Required Crossbore Hole | 2-1/8" diameter |
| Required Edge Bore | 지름 1인치 |
| 재료 | 청동 |
| 마치다 | 베네치아 청동 |
| 품목 무게 | 12파운드 |
| 한국어: | 059184203271 |
보증 및 지원
Specific warranty details are not provided in this document. For warranty information, technical support, or to purchase replacement parts, please contact Weiser customer service directly. You can typically find contact information on the manufacturer's web사이트 또는 제품 포장에 표시되어 있습니다.
제조업체: Weiser Lock
