Weiser SmartCode 5 전자식 데드볼트(9GED14900-001) 사용 설명서

소개

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

제품 특징

• 키리스 엔트리: Operate the deadbolt using a personalized code on the electronic keypad.
• SmartKey Re-key Technology: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• 강화된 보안: Designed for exterior doors where robust security is essential.
• 내구성 있는 구조: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

설정 및 설치

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

주요 설치 단계:

1. Prepare the door and frame according to the provided template.
2. 걸쇠와 스트라이크 플레이트를 설치하십시오.
3. 외부 키패드 어셈블리를 설치하십시오.
4. Install the interior assembly, ensuring proper cable connection.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Perform the door handing process to calibrate the lock.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

작동 지침

문 잠그기:

• 외부에서 (키패드로): Press the 'Lock' button (the padlock icon) on the keypad.
• 외부에서 본 모습 (핵심): Insert your key and turn it to lock the deadbolt.
• 안에서부터: 내부 조립체의 엄지손가락 회전부를 잠금 위치로 돌립니다.

문 잠금 해제:

• 외부에서 (키패드로): Enter your 4-8 digit user code. The deadbolt will retract.
• 외부에서 본 모습 (핵심): Insert your key and turn it to unlock the deadbolt.
• 안에서부터: 내부 조립체의 엄지손가락 회전부를 잠금 해제 위치로 돌립니다.

프로그래밍 사용자 코드:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. 내부 조립체의 배터리 덮개를 여십시오.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. '잠금' 버튼을 누르세요.
5. 새로운 4~8자리 사용자 코드를 입력하세요.
6. '잠금' 버튼을 누르세요.
7. Test the new user code to ensure it unlocks the door.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

유지

배터리 교체:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. 내부 어셈블리에서 배터리 덮개를 제거합니다.
2. 오래된 배터리를 제거하세요.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. 배터리 커버를 다시 장착하세요.

청소:

자물쇠를 청소하려면 부드러운 d를 사용하십시오.amp 천을 사용하십시오. 연마성 세척제, 용제 또는 화학 스프레이는 마감재와 전자 부품을 손상시킬 수 있으므로 사용하지 마십시오.

문제 해결

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• 잠금이 응답하지 않습니다. 배터리 잔량을 확인하고 필요하면 교체하십시오. 외부 및 내부 어셈블리 간의 케이블 연결이 단단히 고정되어 있는지 확인하십시오.
• 키패드에 불이 들어오지 않음: This usually indicates dead batteries. Replace all four AA batteries.
• 데드볼트가 완전히 확장/수축되지 않음: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• 사용자 코드가 작동하지 않습니다. Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser web대지.

명세서

보증 및 지원

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증을 위해 구매 증빙 자료를 보관하세요.

Weiser Customer Support: Refer to your product packaging or the official Weiser web최신 연락처 정보는 사이트에서 확인하세요.