Casio AQ230A-7D Men's Digital-Analog Watch Instruction Manual

1. 소개 및 이상view

This manual provides detailed instructions for the operation and maintenance of your Casio AQ230A-7D digital-analog watch. This timepiece combines classic analog display with modern digital functionalities, offering versatility and reliability for daily wear.

Key features include a digital quartz movement, silver-tone hands and indices, a polished chrome-plated bezel and case, and a durable stainless steel band. The watch is equipped with a daily alarm, hourly time signal, 12/24 hour time format, auto calendar, dual time function, and a chronograph. It is also water resistant.

그림 1: 측면 view of the Casio AQ230A-7D watch, showcasing its polished chrome-plated case and stainless steel band.

2. 특징

• Digital Quartz Movement: 정확한 시간 측정을 보장합니다.
• Square Chrome-Plated Resin Case: Durable and stylish housing.
• Stainless Steel Band with 2-Fold Buckle: 편안하고 안정적인 착용감.
• 아날로그 및 디지털 디스플레이: Provides time in both formats.
• 일일 알람: Set a single alarm for daily reminders.
• Hourly 시간 신호: An audible alert every hour on the hour.
• 12/24시간 형식: 원하는 시간 표시 방식을 선택하세요.
• 자동 달력: Automatically adjusts for month lengths, including leap years.
• 듀얼 타임: Track a second time zone simultaneously.
• 크로노그래프(스톱워치): 경과 시간을 정확하게 측정하세요.
• 방수: Suitable for everyday use and light splashes.

3. 설정 지침

3.1. 아날로그 시간 설정

1. Locate the small button on the right side of the watch case, typically used for setting the analog time.
2. Use a small, pointed object (like a pencil tip) to press and hold this button. The analog hands will begin to move.
3. Release the button when the analog hands reach the desired time.

3.2. Adjusting the Stainless Steel Band

The stainless steel band features an adjustable clasp to ensure a comfortable fit. To adjust the band:

1. Open the clasp and locate the small lever or tab that secures the buckle to the band.
2. Carefully lift this lever to unlock the buckle from its current position on the band.
3. Slide the buckle along the band to the desired length. Ensure the watch fits snugly but comfortably on your wrist.
4. Press the lever back down firmly to lock the buckle in place. Verify that the buckle is securely fastened before wearing the watch.

그림 2: 전면 view of the Casio AQ230A-7D watch on a wrist, showing the digital display below the analog hands.

4. 사용 설명서

Your Casio AQ230A-7D watch has two buttons on the left side of the case. These buttons are used to navigate through the digital modes and adjust settings.

4.1. Navigating Digital Modes

Press the lower-left button to cycle through the digital modes:

• 시간 표시 모드: Displays current digital time, day, and date.
• 알람 모드 : Set and activate the daily alarm.
• 스톱워치 모드 : Use the chronograph function.
• 듀얼타임 모드: View 두 번째 시간대.

4.2. 디지털 시간 및 날짜 설정

1. In Timekeeping Mode, press and hold the upper-left button until the seconds digits start flashing. This indicates the setting mode.
2. Press the lower-left button to cycle through the settings: seconds, hour, minutes, year, month, day, 12/24-hour format.
3. Use the upper-left button to increase the flashing value.
4. Once all settings are adjusted, press the lower-left button to exit the setting mode.

4.3. 알람 사용

1. Navigate to the Alarm Mode using the lower-left button.
2. Press and hold the upper-left button until the alarm hour digits flash.
3. Use the upper-left button to set the alarm hour, then press the lower-left button to move to minutes.
4. Set the alarm minutes using the upper-left button.
5. Press the lower-left button to exit the alarm setting mode.
6. 경보 또는 호버를 활성화/비활성화하려면urly time signal, press the upper-left button while in Alarm Mode (not in setting mode). An alarm icon will appear when activated.

4.4. 스톱워치(크로노그래프) 사용법

1. Navigate to the Stopwatch Mode using the lower-left button.
2. Press the upper-left button to start the stopwatch.
3. Press the upper-left button again to stop the stopwatch.
4. To reset the stopwatch, press the lower-left button while the stopwatch is stopped.

4.5. Using Dual Time

1. Navigate to the Dual Time Mode using the lower-left button.
2. Press and hold the upper-left button until the hour digits flash.
3. Use the upper-left button to set the hour for the second time zone, then press the lower-left button to move to minutes.
4. Set the minutes for the second time zone using the upper-left button.
5. Press the lower-left button to exit the dual time setting mode.

5. 유지관리

5.1. 방수성

This watch is water resistant up to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. However, it is not recommended for swimming, showering, or diving. Avoid operating buttons while the watch is wet to prevent water ingress.

5.2. 배터리 교체

The watch requires 1 LR44 battery. When the display becomes dim or the watch stops functioning, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

5.3. 청소

Wipe the watch case and band with a soft, dry cloth. For the stainless steel band, a slightly damp 천을 사용하여 세척 후 바로 말리세요. 화학 세척제나 연마재는 사용하지 마세요.

그림 3: 상단 view of the Casio AQ230A-7D watch on a wrist, highlighting its compact design.

6. 문제 해결

• 시계가 정확한 시간을 표시하지 않습니다. Check if the battery needs replacement. If the issue persists after battery replacement, consult a service center.
• 디지털 디스플레이가 어둡거나 비어 있음: This usually indicates a low battery. Replace the LR44 battery.
• 아날로그 바늘이 움직이지 않음: Ensure the analog time setting button is not stuck. If the problem continues, the watch may require professional inspection.
• 시계 내부의 물: Immediately take the watch to a qualified service center. Do not attempt to open it yourself, as this may void the warranty and cause further damage.

7. 사양

8. 보증 및 지원

For warranty information about this product, please refer to the official Casio warranty documentation included with your purchase or visit the 카시오 스토어 지원 자료는 여기에서 확인하세요.